The sauropod diversity of the La Amarga Formation (Barremian), Neuquén (Argentina)     

Sebastin Apesteguía 《Gondwana Research》2007,12(4):533-546

A study of the abundant and undescribed isolated and associated bones and teeth from the La Amarga Formation (Barremian of Neuquén, Argentina) permitted the recognition of additional clades of sauropod dinosaurs: basal titanosauriforms, both basal and derived titanosaurs, and rebbachisauroid diplodocoids, which are now added to the already known dicraeosaurids and a recently published basal diplodocoid. These forms substantially increase the knowledge on the Early Cretaceous sauropod diversity in Gondwana.  相似文献   

Late Pleistocene–Holocene environments in Valle Carbajal, Tierra del Fuego, Argentina   总被引：1，自引：0，他引：1  

Ana María Borromei  Andrea Coronato  Mirta Quattrocchio  Jorge Rabassa  Silvia Grill  Claudio Roig   《Journal of South American Earth Sciences》2007,23(4):321-335

The authors discuss Late Pleistocene–Holocene depositional environments in one of the Fuegian Andes valleys on the basis of palynological, geomorphological, and sedimentological analyses from two sites located near the Beagle Channel. The results obtained at these localities reinforce and refine the Late Pleistocene–Holocene climatic pattern previously recorded there. A colder period, associated with the Younger Dryas stadial event, is suggested by low Nothofagus pollen frequency, and communities of grass, low scrub, and shrub heath expanded into the low/middle slopes (10,310 ¹⁴C yr BP). By ca. 9500 ¹⁴C yr BP, warmer and drier conditions occurred, as evidenced by the development of open-grown vegetation in the valley floors (pollen zone O-3), followed by the expansion of open Nothofagus woodland (pollen zone O-2) in the middle Holocene. The milder climate subsequently changed, as indicated by the spreading of the closed forest and mire (pollen zone O-1), to more humid and cooler conditions during the last ca. 5000 yr BP.  相似文献   

Crustal attenuation in the Southern Andean retroarc (38°–39°30′ S) determined from tectonic and gravimetric studies: The Lonco-Luán asthenospheric anomaly     

Andrs Folguera  Antonio Introcaso  Mario Gimnez  Francisco Ruiz  Patricia Martinez  Cynthia Tunstall  Ezequiel García Morabito  Víctor A. Ramos 《Tectonophysics》2007,439(1-4):129-147

The western retroarc of the Southern Andes between 38° and 40° S is formed by a NNW-elongated ridge not associated with stacked thrust sheets. On the contrary, during the last 4–3 Ma this ridge was affected by extensional deformation, regional uplift and related folding on a very broad scale. Receiver function analysis shows that the drainage divide area and adjacent retroarc lie over an attenuated crust. Expected crustal thickness at these latitudes is around 38 km, whereas in this part of the retroarc the thickness is less than 32 km. The causes for such attenuation have been linked to a moderate steepening of the subducted Nazca plate beneath the South American plate, which is suggested by a westward shift and narrowing of the magmatic arc during the last 4 to 5 Ma. Gravimetric studies show that the upper plate did not react homogeneously to slab steepening, but ancient sutures and lithospheric discontinuities deeply buried under Mesozoic to Cenozoic sequences in the retroarc were locally reactivated. These processes resulted in an asthenospheric anomaly that correlates at the surface with the area of Pliocene to Quaternary doming, widespread extension and three radial troughs. Two of the troughs have accommodated substantial amounts of extension, but the third was probably aborted at an early stage. Moreover, the presence of an anomalous concentration of calderas and large volcanic centers over the proposed asthenospheric anomaly, and their age distribution, may indicate minor migration of the asthenospheric anomaly between 4 and 2 Ma through the western South American plate.  相似文献   

Structural framework and Mesozoic–Cenozoic evolution of Ponta Grossa Arch, Paraná Basin, southern Brazil     

Michael Strugale  Sidnei Pires Rostirolla  Fernando Mancini  Carlos Vieira Portela Filho  Francisco Jos Fonseca Ferreira  Rafael Corrêa de Freitas 《Journal of South American Earth Sciences》2007,24(2-4):203-227

  相似文献   

Ordovician igneous and metamorphic units in southeastern Puna: New U–Pb and Sm–Nd data and implications for the evolution of northwestern Argentina   总被引：1，自引：2，他引：1  

Jos María Viramonte  Raúl Alberto Becchio  Jos Germn Viramonte  Marcio Martins Pimentel  Roberto Donato Martino 《Journal of South American Earth Sciences》2007,24(2-4):167-183

New field, petrological, geochemical, and geochronological data (U–Pb and Sm–Nd) for Ordovician rock units in the southeastern Puna, NW Argentina, indicate two lithostratigraphic units at the eastern–northeastern border of salar Centenario: (1) a bimodal volcanosedimentary sequence affected by low- to medium-grade metamorphism, comprising metasediments associated with basic and felsic metavolcanic rocks, dated 485 ± 5 Ma, and (2) a plutonic unit composed of syenogranites to quartz-rich leucogranites with U–Pb zircon ages between 462 ± 7 and 475 ± 5 Ma. Felsic metavolcanic and plutonic rocks are peraluminous and show similar geochemical differentiation trends. They also have similar Sm–Nd isotopic compositions (T_DM model ages of 1.54–1.78 Ga; ε_Nd(T) values ranging from −3.2 to −7.5) that suggest a common origin and derivation of the original magmas from older (Meso-Paleoproterozoic?) continental crust. Mafic rocks show ε_Nd(T) ranging from +2.3 to +2.5, indicating a depleted mantle source. The data presented here, combined with those in the literature, suggest Ordovician magmatism mainly recycles preexisting crust with minor additions of juvenile mantle-derived material.  相似文献   

Utilisation of the image analysis method for the detection of the morphological anisotropy of calcite grains in marble     

Boguslaw Obara  Alena Kožušníková 《Computational Geosciences》2007,11(4):275-281

This paper presents the development and utilisation of an automated image processing algorithm for detection and analysis of grains. Using optical polarising microscopy, a set of colored images are collected from an area on a thin section. A filtering operation, using rotation of a morphological alternating sequence filter (based on a structuring element), is used to remove twinning features within individual grains. Filtering is followed by the watershed segmentation technique to determine grain boundaries. The method is used for the identification of calcite grains in marble and the subsequent analysis of morphological anisotropy.  相似文献   

Mineralogy and heavy metal content in sediments from Rio Gato,Carelmapu and Cucao,Southern Chile     

I. González  M. M. Jordán  T. Sanfeliu  M. Quiroz  C. de la Fuente 《Environmental Geology》2007,52(7):1243-1251

In southern Chile, with a mild and rainy climate, high levels of heavy metals have been detected in many gold placer deposits. Many of the contaminants pose risks to human life, and consequently damage the trofic chain in this environment. The study zones selected correspond to the handicraft gold-bearing sands of Rio Gato (Los Muermos), Carelmapu and Cucao. These are all located in the X Region of “Los Lagos” in Chile. The type of methodology used in the characterization of the associated mineralization consists of testing each representative sample with a grain size distribution, statistical parameter analysis and a mineralogical analysis, using a binocular magnifying glass, a petrographic microscope, XRD and SEM/EDX. The chemical composition was defined by means of X ray fluorescence and micro-chemical analysis. The results of the study about sediments in southern Chile are presented. The major concentrations of heavy minerals are generally located in areas of dynamic river energy. In the samples, more than 70% of the heavy minerals were distributed among grain sizes corresponding to thin sand with good grain selection (meshes of 0.25–0.06 mm). The main mineral phases present in the analysed samples were gold, zircon, olivine, ilmenite, hornblende, hypersthene, hematite, garnet, chromite, chlorite, augite, amphibolitic-epidote, etc. The main heavy metals found as a result of the study were mercury, lead, cadmium, chrome, tellurium, indium, zinc, cobalt, copper, platinum, gold, etc., and as well some less common elements like cerium, praseodymium, gadolinium, neodymium, samarium and lanthanum. This research work is only a starting point for carrying out a risk probability mapping of heavy metals and the mineralogy of the Cucao, Carelmapu and Rio Gato gold-bearing sands.  相似文献   

Mesozoic extension in the Basque–Cantabrian basin (N Spain): Contributions from AMS and brittle mesostructures     

Ruth Soto  Antonio M. Casas-Sainz  Juan J. Villalaín  Beln Oliva-Urcia 《Tectonophysics》2007,445(3-4):373-394

In this work we analyse and check the results of anisotropy of magnetic susceptibility (AMS) by means of a comparison with palaeostress orientations obtained from the analysis of brittle mesostructures in the Cabuérniga Cretaceous basin, located in the western end of the Basque–Cantabrian basin, North Spain. The AMS data refer to 23 sites including Triassic red beds, Jurassic and Lower Cretaceous limestones, sandstones and shales. These deposits are weakly deformed, and represent the syn-rift sequence linked to basins formed during the Mesozoic and later inverted during the Pyrenean compression. The observed magnetic fabrics are typical of early stages of deformation, and show oblate, triaxial and prolate magnetic ellipsoids. The magnetic fabric seems to be related to a tectonic overprint of an original, compaction, sedimentary fabric. Most sites display a NE–SW magnetic lineation that is interpreted to represent the stretching direction of the Early Cretaceous extensional stage of the basin, without recording of the Tertiary compressional events, except for sites with compression-related cleavage.Brittle mesostructures include normal faults, calcite and quartz tension gashes and joints, related to the extensional stage. The results obtained from joints and tension gashes show a dominant N–S to NE–SW, and secondary NW–SE, extension direction. Paleostresses obtained from fault analysis (Right Dihedra and stress inversion methods) indicate NW–SE to E–W, and N–S extension direction. The results obtained from brittle mesostructures show a complex pattern resulting from the superposition of several tectonic processes during the Mesozoic, linked to the tectonic activity related to the opening of the Bay of Biscay during the Early Cretaceous. This work shows the potential in using AMS analysis in inverted basins to unravel its previous extensional history when the magnetic fabric is not expected to be modified by subsequent deformational events. Brittle mesostructure analysis seems to be more sensitive to far-field stress conditions and record longer time spans, whereas AMS records deformation on the near distance, during shorter intervals of time.  相似文献   

Control and prevention of gas outbursts in coal mines, Riosa–Olloniego coalfield, Spain     

María B. Díaz Aguado  C. Gonzlez Nicieza 《International Journal of Coal Geology》2007,69(4):253-266

Underground coal mines have always had to control the presence of different gases in the mining environment. Among these gases, methane is the most important one, since it is inherent to coal. Despite of the technical developments in recent decades, methane hazards have not yet been fully avoided. This is partly due to the increasing depths of modern mines, where methane emissions are higher, and also to other mining-related circumstances, such as the increase in production rates and its consequences: difficulties in controlling the increasing methane levels, increasing mechanization, the use of explosives and not paying close attention to methane control systems.The main purposes of this paper are to establish site measurements using some critical parameters that are not part of the standard mining-control methods for risk assessment and to analyze the gas behavior of subvertical coal seams in deep mines in order to prevent gas incidents from occurring. The ultimate goal is the improvement in mining conditions and therefore in safety conditions.For this purpose, two different mines were instrumented for mine control and monitoring. Both mines belong to the Riosa–Olloniego coalfield, in the Asturias Central Basin, Spain and the areas instrumented are mined via subhorizontal sublevels at an actual depth of around 1000 m under the overburden of Mount Lusorio.During this research, a property favoring gas outbursts was site measured for the first time in an outburst-prone coal (8th Coalbed), gas pressure and its variations, which contributed to complete the data available from previous characterizations and to set some guidelines for assessing the potential outburst-prone areas. A gas-measurement-tube set has been designed for measuring gas pressure as well as its variation over time as a result of nearby workings and to calculate permeability.The paper establishes the effect of overlapping of works, but it also shows the efficacy of two preventive measures to be applied: high pressure water infusion and the exploitation of a protective coal seam (7th Coalbed), that must be mined preferably two complete sublevels before commencing the advance in the outburst-prone coalbed. Both measures constitute an improvement in the mining sequence and therefore in safety, and should be completed with a systematic measurement to control the risk: gas pressure in the 8th Coalbed in the area of influence of other workings, to establish the most suitable moment to renew the advance. Further researches could focus on ascertaining the permeability, not only in mined areas but also in areas of the mine that are still not affected by mining work and on tuning more finely the ranges of influence of overstress time and overlap distance of the workings of the 7th Coalbed in the 8th Coalbed.  相似文献   

Vulnerability assessment in a volcanic risk evaluation in Central Mexico through a multi-criteria-GIS approach   总被引：1，自引：1，他引：1  

José Fernando Aceves-Quesada  Jesús Díaz-Salgado  Jorge López-Blanco 《Natural Hazards》2007,40(2):339-356

The Valley of Toluca is a major industrial and agricultural area in Central Mexico, especially the City of Toluca, the capital of The State of Mexico. The Nevado de Toluca volcano is located to the southwest of The Toluca Basin. Results obtained from the vulnerability assessment phase of the study area (5,040 km² and 42 municipalities) are presented here as a part of a comprehensive volcanic risk assessment of The Toluca Basin. Information has been gathered and processed at a municipal level including thematic maps at 1:250,000 scale. A database has been built, classified and analyzed within a GIS environment; additionally, a Multi-Criteria Evaluation (MCE) approach was applied as an aid for the decision-making process. Cartographic results were five vulnerability maps: (1) Total Population, (2) Land Use/Cover, (3) Infrastructure, (4) Economic Units and (5) Total Vulnerability. Our main results suggest that the Toluca and Tianguistenco urban and industrial areas, to the north and northeast of The Valley of Toluca, are the most vulnerable areas, for their high concentration of population, infrastructure, economic activity, and exposure to volcanic events.  相似文献