Spin rate estimation of sounding rockets using GPS wind-up   总被引：2，自引：1，他引：1  

M. García-Fernández  M. Markgraf  O. Montenbruck 《GPS Solutions》2008,12(3):155-161

Carrier phase wind-up is a well-known effect that arises from the relative rotation between a transmitting and receiving antenna. In GPS measurements at L1 frequency, this effect translates into an error of 19.029 cm per full relative rotation of antennas. Since this effect is independent of the satellite elevation for pure rotation about the antenna boresight axis, it is usually absorbed by the clock estimation in navigation algorithms. Therefore, the impact of wind-up is usually neglected for applications that do not require accuracies to the cm level like RTK. However, in receiving platforms with high rotation rate, the accumulated wind-up value can be important and actually be larger than receiver noise or even ionospheric variations. Therefore, in such scenarios, the wind-up contribution can be isolated and used as a source of information to compute the spin rate of such platforms using an appropriate combination of GPS observables. This work shows some results of a coarse, yet simple, approach to monitor the rotation angle and spin-rate of spin stabilized sounding rockets flown by DLR.  相似文献   

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments     

D. Pardo  C. Torres-Verdín  M. Paszynski 《Computational Geosciences》2008,12(1):83-89

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.  相似文献   

Water balance in the playa-lakes of an arid environment,Monegros, NE Spain   总被引：1，自引：0，他引：1  

Carmen Castañeda  Miguel Ángel García-Vera 《Hydrogeology Journal》2008,16(1):87-102

The playa-lakes of the Monegros desert in north-east Spain are saline wetlands in an arid environment, a rare phenomenon in Europe. These extremely valuable habitats are threatened by changes associated with agricultural expansion and incorporation of new irrigated areas. An understanding of the present hydrologic regime will enable changes to be identified, particularly those brought about by flooding and pollution caused by irrigation surplus. This study sets out to show the results of applying a daily water balance in three selected playa-lakes. The balance was in two parts and consisted of: (1) the average balance for all the endorheic basin using the BALAN_11 program, and (2) the water balance in some playa-lakes, applying discharge flows obtained from the previous balance. The resulting volumes of water were converted to water depths and contrasted with reference volumes taken from field and Landsat images. The model was calibrated by applying various hypotheses of function which enabled the results to be adjusted. The proposed balance is an acceptable reproduction of field water measurements during this period, and underlines the consistency of the conceptual model. The methodology used is appropriate for understanding the playa-lakes function and for monitoring them for conservation purposes.  相似文献   

Hydrogeochemistry and isotope analyses used to determine groundwater recharge and flow in low-gradient catchments of the province of Buenos Aires,Argentina   总被引：7，自引：3，他引：4  

O. M. Quiroz Londoño  D. E. Martínez  C. Dapeña  H. Massone 《Hydrogeology Journal》2008,16(6):1113-1127

The region known as Pampa Plain, in Argentina, is a vast area characterized by slopes of less than 0.05%. The surface sediment is silty sand, mainly Aeolian, referred to as Pampean Loess, which is a phreatic aquifer unit of utmost importance for the water supply of the region. On account of the slight gradient, hydrogeological analyses using only hydraulic measurements are difficult to perform, often leading to confusing results. Thus, the study presented relies on hydrochemical modeling and isotopic determinations as well. The study area comprises three catchments in the inter-mountainous area corresponding to El Moro, Tamangueyú and Seco creeks, and covering 2,570 km² in the province of Buenos Aires. Measurements of piezometric levels and samples of groundwater, surface water and rainwater were carried out between January and March 2005. Major ion results were analyzed by means of hydrochemical graphs and hydrogeochemical modelling using NETPATH. The resulting data show that it is possible to identify local changes in recharge, flow direction and stream/groundwater relationship by using hydrochemical and isotopic information, which may become a useful and more precise tool for the study of particularly flat landscapes.  相似文献   

Editors’ message: Eduardo Usunoff     

Leticia Rodríguez  Luis Sebastián Vives 《Hydrogeology Journal》2008,16(7):1237-1237

  相似文献   

Giant ancient landslide in the Alma water gap (Crimean Mountains,Ukraine): notes to the predisposition,structure, and chronology     

Tomáš Pánek  Jan Hradecký  Veronika Smolková  Karel Šilhán 《Landslides》2008,5(4):367-378

Large-scale ancient landslides of the area of more than 5 km² and volume exceeding 200 × 10⁶ m³ are characteristic features of the valleys incised in the northern periphery of the Crimean Mountains (Ukraine). The largely affected area is located in the outermost cuesta range of the Crimean Mountains which consists of rigid Sarmatian limestones overlying weak Middle Miocene and Upper Palaeogene deposits. A giant landslide arose in the Alma water gap as a reflection of several coincident preparatory factors such as suitable bedrock stratification, smectite-rich bedrock exposed to swelling activity, presence of faults parallel to the valley trend, and river capture event which preceded the landslide event. The occurrence of such ancient megaslides is particularly interesting in the area which is characterized by low precipitation (<500 mm/year) and weak contemporary seismicity. It probably reflects a more dynamic environment in humid phases of the Holocene; however, seismic triggering along the Mesozoic suture zone cannot be rejected. Compressional features such as gravitational folds in the central and distal parts of the landslide, which probably correlate with the whole landslide genesis or its significant reactivation, arose, according to the radiocarbon dating, during the Holocene climatic optimum in the Atlantic period. The slope deformation has been relatively quiescent since that time, except minor historic reactivization which took place in the frontal part of the landslide. We suppose that the studied landslide could be classified as a transitional type of slope deformation with some signs of spreading and translational block slides.  相似文献   

Provenance of the Bosnian Flysch     

Tamás Mikes  Dominik Christ  Rüdiger Petri  István Dunkl  Dirk Frei  Mária Báldi-Beke  Joachim Reitner  Klaus Wemmer  Hazim Hrvatović  Hilmar von Eynatten 《Swiss Journal of Geoscience》2008,101(1):31-54

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.  相似文献   

Sediment Organic Carbon in Todos Santos Bay, Baja California, Mexico     

Stephen V. Smith  Silvia E. Ibarra-Obando  Victoria Díaz-Castañeda  Francisco Javier Aranda-Manteca  José D. Carriquiry  Brian N. Popp  Oscar Gonzalez-Yajimovich 《Estuaries and Coasts》2008,31(4):719-727

Sediment grain size and organic carbon (OC) data collected over the past 50 years, together with δ¹³C values of OC in recently collected samples, were analyzed to improve understanding of sediment OC distribution and abundance in Todos Santos Bay. Sediments in the submarine canyon at the mouth of the bay and in quiet-water locations along the shore are fine grained, high in OC, and have generally low δ¹³C values; sediments in high-energy environments are low in OC and have high δ¹³C values. A bivariate isotopic mixing model indicates that none of the sediments contain >50% terrigenous OC (average ~30%), and that the terrigenous OC content of the sediments is a small proportion of the OC content of local soils. Sediment OC composition is apparently controlled by energy-related sorting and deposition, oxidation of much of the original terrigenous OC, and replacement of some terrigenous OC by marine OC.  相似文献   

Book reviews     

Tapan Mukerji  Gary Mavko  Mark S. Bukowinski  Lucía Lovìson-Golob  J. J. Telega  Benoit Cushman-Roisin  Michael Manga  Yu. N. Korenkov 《Pure and Applied Geophysics》1996,146(2):393-404

  相似文献   

Hybrid seismic modeling based on discrete-wave number and finite-difference methods     

Jiří Zahradník  Peter Moczo 《Pure and Applied Geophysics》1996,148(1-2):21-38

Any calculation of seismic wave propagation comprising the seismic source, the travel path, and the receiver site in a single finite-difference (FD) model requires a considerable amount of computer time and memory. Moreover, the methods currently available for including point sources in the 2D FD calculations are far-field approximations only. Therefore we have developed a new hybrid method for treating the seismic wave fields at localized 2D near-surface structures embedded in a 1D background medium, and excited by a point source. The source radiation and propagation in the background model is solved by the discrete-wave number (DW) method, while the propagation in the local 2D structure is calculated by the FD method. The coupling between the two sets of calculations is performed on a rectangular excitation box surrounding the local structure. We show the usefulness of the method in ground-motion studies where both near-field source effects and local site effects are important. Technical problems connected with the inconsistency between the 3D source radiation and the 2D FD calculation are minor for the relatively distant in-plane point explosive sources, but are more serious for the in-plane dislocation sources.  相似文献