Novel Calix[4]arene‐based Amberlite XAD‐4 Modified Resin for As(III) Removal from Water     

Imdadullah Qureshi  Shahabuddin Memon  Mustafa Yilmaz 《洁净——土壤、空气、水》2013,41(3):258-266

The present article describes As(III) sorption behavior of novel calix[4]arene appended TS‐4 resin. The sorption ability of TS‐4 resin has been evaluated at wide range of pH, i.e., pH 2–14. The maximum As(III) sorption efficiency (95%) was achieved at pH 2, which shows that the TS‐4 resin possesses greater affinity for As(III) at this pH. Column sorption mechanism was evaluated through various operating parameters, i.e., change in concentration, flow rate, bed heights, and pH. The experimental data were also tested against bed depth service time model and from the results; it has been observed that the data is in close agreement with the theoretically calculated values. Thus, from the data it has been revealed that TS‐4 resin has maximum column efficiency of 0.13 mmol g^?1. Application of TS‐4 to real samples indicates a slight decrease (2–3%) in extraction efficiency of TS‐4 because of high concentration of total dissolved salts. Thermal behavior was tested by differential scanning calorimetry and it has been observed that TS‐4 resin is stable up to 160°C. TS‐4 resin was found to be regenerable and best regeneration was achieved by using 4% solution of NaOH. It can be deduced from the study that the resin will find its applicability in small as well as industrial scale water purification plants.  相似文献   

    

I&#;ik Yilmaz  Mustafa Yildirim 《Environmental Geology》2006,50(6):931

  相似文献   

The Effects of Operational Parameters on a Mono-wire Cutting System: Efficiency in Marble Processing     

Emre Yilmazkaya  Yilmaz Ozcelik 《Rock Mechanics and Rock Engineering》2016,49(2):523-539

Mono-wire block cutting machines that cut with a diamond wire can be used for squaring natural stone blocks and the slab-cutting process. The efficient use of these machines reduces operating costs by ensuring less diamond wire wear and longer wire life at high speeds. The high investment costs of these machines will lead to their efficient use and reduce production costs by increasing plant efficiency. Therefore, there is a need to investigate the cutting performance parameters of mono-wire cutting machines in terms of rock properties and operating parameters. This study aims to investigate the effects of the wire rotational speed (peripheral speed) and wire descending speed (cutting speed), which are the operating parameters of a mono-wire cutting machine, on unit wear and unit energy, which are the performance parameters in mono-wire cutting. By using the obtained results, cuttability charts for each natural stone were created on the basis of unit wear and unit energy values, cutting optimizations were performed, and the relationships between some physical and mechanical properties of rocks and the optimum cutting parameters obtained as a result of the optimization were investigated.  相似文献   

Annual cycle of zooplankton abundance and species composition in Izmit Bay (the northeastern Marmara Sea)     

Melek Isinibilir  Ahmet E. Kideys  Ahmet N. Tarkan  I. Noyan Yilmaz 《Estuarine, Coastal and Shelf Science》2008,78(4):739-747

The monthly abundance, biomass and taxonomic composition of zooplankton of Izmit Bay (the northeastern Marmara Sea) were studied from October 2001 to September 2002. Most species within the zooplankton community displayed a clear pattern of succession throughout the year. Generally copepods and cladocerans were the most abundant groups, while the contribution of meroplankton increased at inner-most stations and dominated the zooplankton. Both species number (S) and diversity (H′) were positively influenced by the increase in salinity of upper layers (r = 0.30 and r = 0.31, p < 0.001, respectively), while chlorophyll a was negatively affected (r = −0.36, p < 0.001). Even though Noctiluca scintillans had a significant seasonality (F_11,120 = 8.45, p < 0.001, ANOVA), abundance was not related to fluctuations in temperature and only chlorophyll a was adversely correlated (r = −0.35, p < 0.001). In general, there are some minor differences in zooplankton assemblages of upper and lower layers. A comparison of the species composition and abundance of Izmit Bay with other Black Sea bays reveals a high similarity between them.  相似文献   

Geotechnical evaluation of Miocene gypsum from Sivas (Turkey), Geotechnical and Geological Engineering     

E. Karacan  I. Yilmaz 《Geotechnical and Geological Engineering》2000,18(3):241-241

  相似文献   

Apparent Magnetic Constant at Istanbul     

Yilmaz ispir  A. Mete I&#;ikara 《Geophysical Journal International》1975,43(2):621-626

  相似文献   

Tethyan evolution of Turkey: A plate tectonic approach   总被引：9，自引：0，他引：9  

A.M.Cell Sengr  Yücel Yilmaz 《Tectonophysics》1981,75(3-4)

The Tethyan evolution of Turkey may be divided into two main phases, namely a Palaeo-Tethyan and a Neo-Tethyan, although they partly overlap in time. The Palaeo-Tethyan evolution was governed by the main south-dipping (present geographic orientation) subduction zone of Palaeo-Tethys beneath northern Turkey during the Permo-Liassic interval. During the Permian the entire present area of Turkey constituted a part of the northern margin of Gondwana-Land. A marginal basin opened above the subduction zone and disrupted this margin during the early Triassic. In this paper it is called the Karakaya marginal sea, which was already closed by earliest Jurassic times because early Jurassic sediments unconformably overlie its deformed lithologies. The present eastern Mediterranean and its easterly continuation into the Bitlis and Zagros oceans began opening mainly during the Carnian—Norian interval. This opening marked the birth of Neo-Tethys behind the Cimmerian continent which, at that time, started to separate from northern Gondwana-Land. During the early Jurassic the Cimmerian continent internally disintegrated behind the Palaeo-Tethyan arc constituting its northern margin and gave birth to the northern branch of Neo-Tethys. The northern branch of Neo-Tethys included the Intra-Pontide, Izmir—Ankara, and the Inner Tauride oceans. With the closure of Palaeo-Tethys during the medial Jurassic only two oceanic areas were left in Turkey: the multi-armed northern and the relatively simpler southern branches of Neo-Tethys. The northern branch separated the Anatolide—Tauride platform with its long appendage, the Bitlis—Pötürge fragment from Eurasia, whereas the southern one separated them from the main body of Gondwana-Land. The Intra-Pontide and the Izmir—Ankara oceans isolated a small Sakarya continent within the northern branch, which may represent an easterly continuation of the Paikon Ridge of the Vardar Zone in Macedonia. The Anatolide-Tauride platform itself constituted the easterly continuation of the Apulian platform that had remained attached to Africa through Sicily. The Neo-Tethyan oceans reached their maximum size during the early Cretaceous in Turkey and their contraction began during the early late Cretaceous. Both oceans were eliminated mainly by north-dipping subduction, beneath the Eurasian, Sakaryan, and the Anatolide- Tauride margins. Subduction beneath the Eurasian margin formed a marginal basin, the present Black Sea and its westerly prolongation into the Srednogorie province of the Balkanides, during the medial to late Cretaceous. This resulted in the isolation of a Rhodope—Pontide fragment (essentially an island arc) south of the southern margin of Eurasia. Late Cretaceous is also a time of widespread ophiolite obduction in Turkey, when the Bozkir ophiolite nappe was obducted onto the northern margin of the Anatolide—Tauride platform. Two other ophiolite nappes were emplaced onto the Bitlis—Pötürge fragment and onto the northern margin of the Arabian platform respectively. This last event occurred as a result of the collision of the Bitlis—Pötürge fragment with Arabia. Shortly after this collision during the Campanian—Maastrichtian, a subduction zone began consuming the floor of the Inner Tauride ocean just to the north of the Bitlis—Pötürge fragment producing the arc lithologies of the Yüksekova complex. During the Maastrichtian—Middle Eocene interval a marginal basin complex, the Maden and the Çüngüş basins began opening above this subduction zone, disrupting the ophiolite-laden Bitlis—Pötürge fragment. The Anatolide-Tauride platform collided with the Pontide arc system (Rhodope—Pontide fragment plus the Sakarya continent that collided with the former during the latest Cretaceous along the Intra Pontide suture) during the early to late Eocene interval. This collision resulted in the large-scale south-vergent internal imbrication of the platform that produced the far travelled nappe systems of the Taurides, and buried beneath these, the metamorphic axis of Anatolia, the Anatolides. The Maden basin closed during the early late Eocene by north-dipping subduction, synthetic to the Inner-Tauride subduction zone that had switched from south-dipping subduction beneath the Bitlis—Pötürge fragment to north dipping subduction beneath the Anatolide—Tauride platform during the later Palaeocene. Finally, the terminal collision of Arabia with Eurasia in eastern Turkey eliminated the Çüngüş basin as well and created the present tectonic regime of Turkey by pushing a considerable piece of it eastwards along the two newly-generated transform faults, namely those of North and East Anatolia. Much of the present eastern Anatolia is underlain by an extensive mélange prism that accumulated during the late Cretaceous—late Eocene interval north and east of the Bitlis—Pötürge fragment.  相似文献   

Multistage exhumation of the Menderes Massif, western Anatolia (Turkey)     

Andor L. W. Lips  Daniel Cassard  Hasan Sözbilir  Huseyin Yilmaz  J.R. Wijbrans 《International Journal of Earth Sciences》2001,89(4):781-792

  相似文献   

Fish assemblage structure of Koycegiz Lagoon–Estuary, Turkey: Spatial and temporal distribution patterns in relation to environmental variation     

S. Akin  E. Buhan  K.O. Winemiller  H. Yilmaz 《Estuarine, Coastal and Shelf Science》2005,64(4):671-684

Spatial and temporal variation in fish assemblage structure of Koycegiz Lagoon–Estuarine System (KLES), located on the northwestern Turkish coast of Mediterranean, was investigated along an estuarine gradient where salinity ranged from 5 in upper reaches to 40 in lower reaches during October 1993–September 1994. Throughout the study, 42 species, consisting of marine (25), marine–estuarine-dependent (12), freshwater (3), catadromous (1), and estuarine resident (1) forms, were collected in trammel nets. Although species richness of marine species was greater than that of other groups, numerical contribution by marine species to the total catch was only 16%. Tilapia spp., the most abundant species mostly during summer and early spring at upper reaches, contributed 17% of the total samples. Among the seven species of Mugilidae, which contributed 42% of the total catch, Mugil cephalus, Liza aurata, and Liza salines contributed 10, 13, and 10% of the total catch, respectively. Consistent with findings from other studies, species richness and abundance were highest during late spring and summer and the lowest during winter and early spring. Samples from sites at or near the sea had more marine species. Samples from upper reaches had more freshwater and marine–estuarine-dependent species. Canonical correspondence analysis (CCA) indicated that salinity and turbidity were the most important environmental parameters affecting fishes. Sites near the sea were associated with high salinity and low turbidity, and sites in upper reaches had low salinity and high turbidity. Thus, the pattern observed in fish assemblage structure appears to be strongly influenced by species' responses to dominant salinity and turbidity gradients.  相似文献   

The Erzincan (Turkey) Earthquake (Ms 6.8) of March 13, 1992 and its Aftershock Sequence     

H. Grosser  M. Baumbach  H. Berckhemer  B. Baier  A. Karahan  H. Schelle  F. Krüger  A. Paulat  G. Michel  R. Demirtas  S. Gencoglu  R. Yilmaz 《Pure and Applied Geophysics》1998,152(3):465-505

—The Erzincan strike-slip earthquake of March 13, 1992 ruptured a section of the North Anatolian fault (NAF) at the northern margin of the Erzincan basin. The focal depth of about 10 km was less than given by ISC and NEIC. Erzincan and the surrounding villages were considerably damaged. In the Erzincan basin and in the neighbouring mountains a seismic network of ten stations was installed. It was operating continuously from March 21 through June 16, 1992. More than 3,000 aftershocks were recorded of which 505 could be located. The spectral parameters of 394 and the fault-plane solutions of 53 aftershocks were determined. For the given region the frequency dependent coda Q was derived as Q _c = 122 f ^0.68. The aftershock area increased with time, reflecting the process of stress redistribution. Some events clustered in the immediate vicinity of the town of Erzincan close to the epicentre of the main event and seem to trace the NAF. Their source mechanism is similar to that of the main event (strike slip). About 150 aftershocks clustered in the southeastern part of the Erzincan basin where a concentration of the events in a small volume of 5 × 5 × 3 km³ was observed. The majority of fault-plane solutions available for these aftershocks showed a normal faulting mechanism with an east-west directed extension. Most of the aftershocks southeast of the basin clustered between two lineaments that were mapped by satellite images. The P-wave velocity below the Erzincan basin, derived from travel-time residual analysis, is lower compared to areas NE and SW of the basin. Three-dimen sional stress modelling of the Erzincan region qualitatively explains the occurrence of the aftershocks southeast of the basin. The calculated displacement distribution which exhibits the north-westward motion of the basin and tension at its southeastern margin, caused by the Erzincan earthquake, is in agreement with derived fault-plane solutions.  相似文献