Tropical chemical weathering of hillslope deposits and bedrock source in the Aburrá Valley, northern Colombian Andes     

Edier Aristizbal  Barry Roser  Shuichiro Yokota 《Engineering Geology》2005,81(4):389-406

Tropical chemical weathering produces extensive lateritization and formation of deep weathering profiles. Both processes are fundamental to landscape evolution and slope instability. The Aburrá Valley of the northern Colombian Andes is characterized by tropical conditions. The valley slopes are mostly covered by hillslope deposits originating from four basement rock suites which comprise contrasting granitoid, volcanic–sedimentary, ophiolitic, and metamorphic sources, respectively. Tropical chemical weathering of the Aburrá hillslope deposits and their respective bedrock were examined using X-ray fluorescence and X-ray diffraction analysis, to document and quantify their chemical weathering profiles, compositions, and mineralogical properties. The Chemical Index of Alteration (CIA), loss on ignition (LOI), and the Mobiles index (Imob) were used to quantify the degree of weathering of hillslope deposits and bedrock source. Weathering trends were analyzed using A–CN–K and A–CNK–FM diagrams. The material mantling the slopes in the Aburrá Valley records an intense weathering history. Chemical weathering is characterized by increased development of clay minerals (kaolinite, halloysite) and iron and aluminum sesquioxides. Lateritization characterizes the final stage of the weathering profiles. Concentrations of CaO, Na₂O, K₂O decrease markedly in the weathering products compared to the fresh bedrock source, whereas concentrations of Al₂O₃, Fe₂O₃, and MgO increase significantly. CIA ratios of matrix slope deposits derived from all four sources near 100, whereas those of boulder slope deposits and saprolites are lower, but exceed source rock values. Different A–CN–K weathering paths are evident for each lithotype, validating the correlation established between the hillslope deposits and their various parents. Chemical weathering indices in some samples are strongly influenced by the presence of sesquioxides, as reflected by high LOI, anomalously low CIA, and varying enrichment trends on the A–CNK–FM diagrams. Consequently, different chemical indices based on different criteria need to be combined to obtain best results, as illustrated here by the combination of LOI, CIA, and Imob. The overall results suggest that tropical conditions have dominated for a long time in the northern Colombian Andes, leading to uniformly high weathering indices in matrix slope deposits irrespective of parent lithotype. Prolonged warm and humid conditions could thus be responsible for the weathering and remobilization of extensive old hillslope deposits during the Quaternary. However, in addition to the influence of climatic factors, tectonism has also undoubtedly influenced slope evolution in the Aburrá Valley.  相似文献   

Quasi-static internal deformation due to a dislocation source in a multilayered elastic/viscoelastic half-space and an equivalence theorem   总被引：1，自引：0，他引：1  

Yukitoshi Fukahata  Mitsuhiro Matsu'ura 《Geophysical Journal International》2006,166(1):418-434

  相似文献   

3-D Simulation of Tectonic Loading at Convergent Plate Boundary Zones: Internal Stress Fields in Northeast Japan     

Chihiro Hashimoto  Mitsuhiro Matsu'ura 《Pure and Applied Geophysics》2006,163(9):1803-1817

The evidence of east-west compression in northeast Japan has been reported by many investigators on the basis of geodetic, geologic and geomorphic data, but its origin still remains far from understood. In the present study we have proposed a mechanical model of tectonic loading at convergent plate boundary zones, and demonstrated its validity through the numerical simulation of internal stress fields in northeast Japan with realistic 3-D geometry of plate interfaces. At convergent plate boundary zones, in general, a part of plate convergence is consumed by steady slip along plate interfaces, and the remaining part by inelastic deformation (seismic faulting, aseismic faulting, and active folding) of overriding plates. Such a plate boundary process to be called ``partial collision' can be quantitatively described by introducing a collision rate defined as c = 1 − steady slip rate at plate interfaces/plate convergence rate. By this definition, we can simply represent the mechanical process of partial collision, which includes total subduction (c = 0) and total collision (c = 1) as two extreme cases, in terms of steady slip rates at plate interfaces. On the basis of elastic dislocation theory, first, we numerically computed the internal stress fields in northeast Japan produced by the total subduction of the Pacific plate beneath the North American plate, however the computed stress pattern was opposite in sense to observations. Then, we computed the internal stress fields by taking c = 0.1 on average, and succeeded in reproducing the observed east-west compression in northeast Japan. This indicates that the concept of partial collision is essential to understand the mechanism of intraplate tectonic loading.  相似文献   

The 10 ka multiple vent pyroclastic eruption sequence at Tongariro Volcanic Centre, Taupo Volcanic Zone, New Zealand: Part 2. Petrological insights into magma storage and transport during regional extension     

Mitsuhiro Nakagawa  Ian A Nairn  Tetsuo Kobayashi   《Journal of Volcanology and Geothermal Research》1998,86(1-4)

The six eruption episodes of the 10 ka Pahoka–Mangamate (PM) sequence (see companion paper) occurred over a ?200–400-year period from a 15-km-long zone of multiple vents within the Tongariro Volcanic Centre (TgVC), located at the southern end of the Taupo Volcanic Zone (TVZ). Most TgVC eruptives are plagioclase-dominant pyroxene andesites and dacites, with strongly porphyritic textures indicating their derivation from magmas that ascended slowly and stagnated at shallow depths. In contrast, the PM pyroclastic eruptives show petrographic features (presence of phenocrystic and groundmass hornblende, and the coexistence of olivine and augite without plagioclase during crystallisation of phenocrysts and microphenocrysts) which suggest that their crystallisation occurred at depth. Depths exceeding 8 km are indicated for the dacitic magmas, and >20 km for the andesitic and basaltic andesitic magmas. Other petrographic features (aphyric nature, lack of reaction rims around hornblende, and the common occurrence of skeletal microphenocrystic to groundmass olivine in the andesites and basaltic andesites) suggest the PM magmas ascended rapidly immediately prior to their eruption, without any significant stagnation at shallow depths in the crust. The PM eruptives show three distinct linear trends in many oxide–oxide diagrams, suggesting geochemical division of the six episodes into three chronologically-sequential groups, early, middle and late. Disequilibrium features on a variety of scales (banded pumice, heterogeneous glassy matrix and presence of reversely zoned phenocrysts) suggest that each group contains the mixing products of two end-member magmas. Both of these end-member magmas are clearly different in each of the three groups, showing that the PM magma system was completely renewed at least three times during the eruption sequence. Minor compositional diversity within the eruptives of each group also allows the PM magmas to be distinguished in terms of their source vents. Because petrography suggests that the PM magmas did not stagnate at shallow levels during their ascent, the minor diversity in magmas from different vents indicates that magmas ascended from depth through separate conduits/dikes to erupt at different vents either simultaneously or sequentially. These unique modes of magma transport and eruption support the inferred simultaneous or sequential tapping of small separate magma bodies by regional rifting in the southern Taupo Volcanic Zone during the PM eruption sequence (see companion paper).  相似文献   

Microstructures and flow mechanisms in regional metamorphic rocks of Japan     

Mitsuhiro Toriumi  Jun Teruya  Megumi Masui  Hidesato Kuwahara 《Contributions to Mineralogy and Petrology》1986,94(1):54-62

A number of microstructural features indicate a difference in the dominant deformation mechanism between the higher temperature Ryoke and the lower temperature Sambagawa and Shimanto metamorphic belts of Japan. The microstructures of metacherts containing deformed radiolaria are divided into two types: in both the Sambagawa and Shimanto belts the quartz grains are tabular while in the Ryoke belt they are equiaxed. TEM studies of these metacherts revealed that the tabular grains contain abundant subboundaries consisting of large numbers of network dislocations and bowe-out dislocations, while the equiaxed grains contain no subboundaries and have low densities of dislocations which are not bowed-out. There is a corresponding difference in the textures (lattice preferred orientation of quartz): the Ryoke metacherts display randomly distributed c-axes of quartz, while the Sambagawa and Shimanto metacherts show conspicuous crossed girdle patterns with some asymmetry. There is a third difference between these regions: in the metacherts of the Ryoke metamorphic belt, the strain magnitudes determined from deformed radiolaria increase with increasing volume fraction of mica in the same metamorphic P and T conditions, while in the Sambagawa and the Shimanto metamorphic cherts the strain magnitudes decrease with increasing the mica fraction.These microstructures, textures, and rheological behaviours of quartz-mica rocks suggest a change of deformation mechanism between the lower temperature Sambagawa and Shimanto, and the higher temperature Ryoke metamorphic belts. Since random fabrics of c-axes of quartz are inconsistent with lattice rotation due to dislocation glide, the Ryoke metacherts may have deformed by pressure-solution.  相似文献   

Metamorphism of the Izu-Tanzawa collision zone     

Mitsuhiro Toriumi  Toru Arai 《Tectonophysics》1989,160(1-4):293-303

The difference in pressure condition of progressive metamorphism established by Schreinemakers' analysis of mineral assemblages in metabasalts makes it possible for the low grade metamorphism of the Izu-Tanzawa-Fujigawadani collision zone to be divided into three types. Type I is characterized by prehnite + epidote + hematite, suggesting the lowest pressure type; whereas type II is defined by prehnite + epidote + actinolite—the intermediate pressure type, and finally the distinctive assemblage of type III is pumpellyite + epidote + actinolite—the higher pressure type. The pressure conditions estimated are about 1 kbar for type I, 1–2 kbar for type II and 2–3 kbar for type III. The metamorphic rocks of type III occur in the southwestern part of the Tanzawa Mountains, and the metamorphic rocks of type I occur in the central Izu Peninsula and the northeast Tanzawa Mountains. Therefore, the upward displacement of the accretion mass due to collision deformation is most significant at the southwest Tanzawa Mountains. This suggests that the accretion of the Tanzawa and Izu blocks is accompanied with large-scale tilting of the mass.  相似文献   

Reconstruction of the eruptive history of Usu volcano,Hokkaido, Japan,inferred from petrological correlation between tephras and dome lavas     

Akiko Matsumoto  Mitsuhiro Nakagawa 《Island Arc》2019,28(3)

Usu volcano has erupted nine times since 1663. Most eruptive events started with an explosive eruption, which was followed by the formation of lava domes. However, the ages of several summit lava domes and craters remain uncertain. The petrological features of tephra deposits erupted from 1663 to 1853 are known to change systematically. In this study, we correlated lavas with tephras under the assumption that lava and tephra samples from the same event would have similar petrological features. Although the initial explosive eruption in 1663 was not accompanied by lava effusion, lava dome or cryptodome formation was associated with subsequent explosive eruptions. We inferred the location of the vent associated with each event from the location of the associated lava dome and the pyroclastic flow deposit distribution and found that the position of the active vent within the summit caldera differed for each eruption from the late 17th through the 19th century. Moreover, we identified a previously unrecognized lava dome produced by a late 17th century eruption; this dome was largely destroyed by an explosive eruption in 1822 and was replaced by a new lava dome during a later stage of the 1822 event at nearly the same place as the destroyed dome. This new interpretation of the sequence of events is consistent with historical sketches and documents. Our results show that petrological correlation, together with geological evidence, is useful not only for reconstructing volcanic eruption sequences but also for gaining insight into future potential disasters.  相似文献   

Erratum to “A descriptive analysis of temporal and spatial patterns of variability in Puget Sound oceanographic properties” [Estuarine,Coastal and Shelf Science 80 (2008) 545–554]     

Stephanie K. Moore  Nathan J. Mantua  Jan A. Newton  Mitsuhiro Kawase  Mark J. Warner  Jonathan P. Kellogg 《Estuarine, Coastal and Shelf Science》2010

  相似文献   

Experimental study of a low-alkali tholeiite at 1–5 kbar: optimal condition for the crystallization of high-An plagioclase in hydrous arc tholeiite     

Daisuke?Takagi  Hiroaki?SatoEmail author  Mitsuhiro?Nakagawa 《Contributions to Mineralogy and Petrology》2005,149(5):527-540

We conducted melting experiments on a low-alkali tholeiite (SiO₂ ~52 wt%, MgO ~6.5 wt%, CaO/Na₂O~4.4, Al₂O₃/SiO₂ ~0.33) under both H₂O-undersaturated and H₂O-saturated conditions to investigate the effect of H₂O on the Ca–Na partitioning between plagioclase and melt. Experiments were performed in the temperature and pressure ranges of 1,000–1,300°C and 1–5 kbar, respectively, with varying H₂O contents of 0–12wt%. Redox condition was 0–2 log unit above NNO (nickel–nickel oxide) buffer. Temperature-bulk H₂O diagrams for the low-alkali tholeiite are constructed at 1, 2, and 5 kbar, and compositions of near-liquidus plagioclase and coexisting melt are determined. To exclude the effect of melt composition (CaO/Na₂O and Al₂O₃/SiO₂ ratios) on plagioclase composition and to reveal the effect of H₂O on An (=100×Ca/(Ca+Na)) content and (=(Ca/Na)_pl/(Ca/Na)_melt), we focused on the composition of near-liquidus plagioclases which crystallized from melts with nearly constant CaO/Na₂O and Al₂O₃/SiO₂ ratios. Our experimental results show that, at each experimental pressure, An content of the near-liquidus plagioclase and the K_D^Ca-Na almost linearly increases as H₂O content in melt increases. Each of the An content and the variations in a low-alkali tholeiitic system (CaO/Na₂O~4.0–4.5, Al₂O₃/SiO₂ ~0.27–0.33) can be described by one equation using temperature, pressure, and melt H₂O content as parameters. An content and of liquidus plagioclase increases with increasing melt H₂O and with decreasing pressure, elucidating that nearly H₂O-saturated conditions of 2–3 kbar is optimal for the crystallization of the most An-rich plagioclase (>An₈₈). We suggest this pressure condition of 2–3 kbar, corresponding to depth of 7–11 km, plays an important role for the origin of An-rich plagioclase in H₂O-rich low-alkali tholeiite. At pressures more than ca. 4 kbar, crystallization of liquidus Ca-rich clinopyroxene decreases the CaO/Na₂O ratio of liquid, thus prohibiting the crystallization of high-An plagioclase from hydrous tholeiite.  相似文献   

Continuing observation of disturbed reproductive cycle and ovarian spermatogenesis in the giant abalone, Haliotis madaka from an organotin-contaminated site of Japan   总被引：1，自引：0，他引：1  

Horiguchi T  Kojima M  Takiguchi N  Kaya M  Shiraishi H  Morita M 《Marine pollution bulletin》2005,51(8-12):817-822

Histological examination of gonads as well as chemical analysis of organotin compounds in tissues of the giant abalone, Haliotis madaka, was conducted to evaluate continuing endocrine disruption in abalone populations in Japan. Abalone specimens were collected from two different areas, Tsushima as a reference site and Jogashima as a site representative of declining abalone populations where serious organotin contamination had been observed, each month from January 1998 to March 1999. Scores were given to the development stages of reproductive cells in the ovary and testis. The degree of sexual maturation was evaluated by calculating the mean value of a histogram of these scores for the reproductive cells of each abalone. The temporal variations in degree of sexual maturation showed that female and male abalone from Tsushima matured synchronously, while those from Jogashima did not, which were similar to results of the previous study during September 1995–November 1996. Approximately 19% of the female abalone from Jogashima were masculinized with an ovo-testis, which was also similar to the result of the previous study. The masculinization of female abalone is reported to be induced by tributyltin (TBT) and triphenyltin (TPhT) from antifouling paints. Concentrations of the sum of butyltins (TBT, dibutyltin (DBT) and monobutyltin (MBT): ΣBTs) and the sum of phenyltins (TPhT, diphenyltin (DPhT) and monophenyltin (MPhT): ΣPhTs) in the muscle of abalone from Jogashima (n = 73) of 7.8 ± 9.0 ng/g wet wt. and 4.5 ± 6.8 ng/g wet wt., respectively, were significantly higher than those from Tsushima (n = 87) of 4.7 ± 4.9 ng/g wet wt. and 0.8 ± 1.7 ng/g wet wt., respectively (p < 0.05 for ΣBTs; p < 0.001 for ΣPhTs), although concentrations of TBT and TPhT in the muscle of abalone from Jogashima (n = 73) of 2.2 ± 2.5 ng/g wet wt. and 5.8 ± 5.1 ng/g wet wt., respectively, were insignificantly and significantly higher than those from Tsushima (n = 87) of 0.4 ± 0.6 ng/g wet wt. and 0.5 ± 0.9 ng/g wet wt., respectively, (p > 0.05 for TBT; p < 0.001 for TPhT). Thus, endocrine disruption as well as contamination by organotins in the giant abalone from Jogashima is still persisting.  相似文献