Simulating bubble number density of rhyolitic pumices from Plinian eruptions: constraints from fast decompression experiments     

Morihisa Hamada  Didier Laporte  Nicolas Cluzel  Kenneth T. Koga  Tatsuhiko Kawamoto 《Bulletin of Volcanology》2010,72(6):735-746

Decompression experiments of a crystal-free rhyolitic liquid with ≈ 6.6 wt. % H₂O were carried out at a pressure range from 250 MPa to 30–75 MPa in order to characterize effects of magma ascent rate and temperature on bubble nucleation kinetics, especially on the bubble number density (BND, the number of bubbles produced per unit volume of liquid). A first series of experiments at 800°C and fast decompression rates (10–90 MPa/s) produced huge BNDs (≈ 2 × 10¹⁴ m⁻³ at 10 MPa/s ; ≈ 2 × 10¹⁵ m⁻³ at 90 MPa/s), comparable to those in natural silicic pumices from Plinian eruptions (10¹⁵–10¹⁶ m⁻³). A second series of experiments at 700°C and 1 MPa/s produced BNDs (≈ 9×10¹² m⁻³) close to those observed at 800°C and 1 MPa/s (≈ 6 × 10¹² m⁻³), showing that temperature has an insignificant effect on BNDs at a given decompression rate. Our study strengthens the theory that the BNDs are good markers of the decompression rate of magmas in volcanic conduits, irrespective of temperature. Huge number densities of small bubbles in natural silicic pumices from Plinian eruptions imply that a major nucleation event occurs just below the fragmentation level, at which the decompression rate of ascending magmas is a maximum (≥ 1 MPa/s).  相似文献   

Physical property anisotropy of foliated fault rocks: Study from the Nobeoka Thrust,Shimanto Belt,southwest Japan          下载免费PDF全文

Mari Hamahashi  Wataru Tanikawa  Yohei Hamada  Yoshitaka Hashimoto  Saneatsu Saito  Gaku Kimura 《Island Arc》2018,27(5)

To investigate the physical property anisotropies of foliated fault rocks in subduction zones, the hanging wall phyllites and footwall cataclasites exhumed along the Nobeoka Thrust, a fossilized out‐of‐sequence‐thrust in the Shimanto Belt, Japan, was focused. Discrete physical property (electric resistivity, P‐ and S‐wave velocities, and porosity) measurements were conducted employing geologic coordinates (depth‐parallel direction, strike direction, and maximum dip direction of foliation), using the core samples obtained from the Nobeoka Thrust Drilling Project and compared the data to borehole geophysical logs. A higher sample P‐wave velocity (Vp), lower S‐wave velocity (Vs), higher Vp/Vs, and lower sample porosity and resistivity compared to the logs, are inferred to have been caused by the larger sampling scale of the logs and lower fluid saturation of the borehole. The phyllites and cataclasites exhibited substantial vertical and horizontal anisotropy of Vp (0.4–17.3 % and 2.7–13.8 %, respectively), Vs (0.5–56 % and 7.7–43 %, respectively), and resistivity (0.9–119 % and 2.0–65.9 %, respectively). The physical property anisotropies are primarily affected by the dip angles of foliation. The fault rocks that have gentler dip angles exhibit a higher Vp in the strike and maximum dip direction and a lower Vp in the depth‐parallel direction. In contrast, the fault rocks that have steeply dipping structures show a higher Vp in the strike and depth‐parallel directions with a lower velocity in the maximum dip direction. Resistivity anisotropy show a trend opposite to that of the Vp in relation to the dip angles. Our results show lower Vp anisotropy than those obtained in previous studies, which measured wave speeds perpendicular or parallel to foliation under confining pressure. This study highlights the significance of dip angles on vertical properties in geophysical surveys across foliated fault rocks.  相似文献   

Comparison of horizontal ground displacements in Avonside area,Christchurch from air photo,LiDAR and satellite measurements regarding pipeline damage assessment     

S. Toprak  E. Nacaroglu  A. C. Koc  T. D. O’Rourke  M. Hamada  M. Cubrinovski  S. Van Ballegooy 《Bulletin of Earthquake Engineering》2018,16(10):4497-4514

Recent earthquakes show that pipeline damage is severe in the areas where permanent ground deformations (e.g., liquefaction zones) occur. Ground movement hazard to pipeline systems can be assessed by using ground displacement measurements around the location of pipelines. There are many different ways of measuring ground displacements after an earthquake occur. This paper compares displacements measured in Avonside area, Christchurch, NZ, by using four different ways with respect to their effects on pipeline damage assessments. They are air photo, satellite, high resolution light detection and ranging (LiDAR) surveys data presented at 4- and 56-m grids acquired before and after the M_w6.2 22 February 2011 earthquake. Avonside area was in the liquefaction zones of the 22 February 2011 earthquake. Where possible, benchmark measurements were also included in the comparisons. In this study, the focus was on asbestos cement and cast iron water pipelines as the length of the pipelines and the number of damages in the study area was much higher compared to other pipe materials, providing sufficient repair rate data passing the screening criteria to develop linear regressions. The correlations between pipeline damage and lateral ground strains were developed by calculating the horizontal strains from these four different type displacements. The comparisons show that satellite imagery is good for estimating total movements but not so good for estimating lateral strains and conversely LiDAR surveys are not so good for estimating total movements, but much better for estimating lateral strains. Hence, pipeline damage correlations with LiDAR calculated strains provide higher determination coefficient (r²) value. The results of comparisons are presented and discussed.  相似文献   

Acoustic properties of deformed rocks in the Nobeoka thrust,in the Shimanto Belt,Kyushu, Southwest Japan          下载免费PDF全文

Yoshitaka Hashimoto  Shogo Abe  Hiroki Tano  Gaku Kimura  Asuka Yamaguchi  Rina Fukuchi  Jun Kameda  Yohei Hamada  Yujin Kitamura  Koichiro Fujimoto  Mio Eida 《Island Arc》2017,26(4)

Laboratory measurements for compressional and shear wave velocities (Vp and Vs, respectively) and porosity were conducted with core samples from the Nobeoka Thrust Drilling Project (NOBELL) under controlled effective pressure (5–65 MPa at 5 MPa intervals) and wet conditions. Samples were classified according to deformation texture as phyllite, foliated cataclasite, or non‐foliated cataclasite. Measured values of Vp, Vs, and porosity are within a range of 5.17–5.57 km/s, 2.60–2.71 km/s, and 2.75–3.10 %, respectively, for phyllite; 4.89–5.23 km/s, 2.46–2.57 km/s, and 3.58–4.53 %, respectively, for foliated cataclasite; and 4.90–5.32 km/s, 2.51–2.63 km/s, and 3.79–4.60 %, respectively, for non‐foliated cataclasite, which are all consistent with the previous laboratory experiments conducted with outcrop samples under dry conditions. However, our results also indicate higher Vp and Vs and lower porosity than those measured by the previous studies that adopted the wire‐line logging methods. The variations in Vp, Vs, and porosity are controlled by deformation structure and are greater for phyllite and foliated cataclasite than for non‐foliated cataclasite.  相似文献   

Automated Identification of Coronal Holes from Synoptic EUV Maps     

Amr Hamada  Timo Asikainen  Ilpo Virtanen  Kalevi Mursula 《Solar physics》2018,293(4):71

Coronal holes (CHs) are regions of open magnetic field lines in the solar corona and the source of the fast solar wind. Understanding the evolution of coronal holes is critical for solar magnetism as well as for accurate space weather forecasts. We study the extreme ultraviolet (EUV) synoptic maps at three wavelengths (195 Å/193 Å, 171 Å and 304 Å) measured by the Solar and Heliospheric Observatory/Extreme Ultraviolet Imaging Telescope (SOHO/EIT) and the Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA) instruments. The two datasets are first homogenized by scaling the SDO/AIA data to the SOHO/EIT level by means of histogram equalization. We then develop a novel automated method to identify CHs from these homogenized maps by determining the intensity threshold of CH regions separately for each synoptic map. This is done by identifying the best location and size of an image segment, which optimally contains portions of coronal holes and the surrounding quiet Sun allowing us to detect the momentary intensity threshold. Our method is thus able to adjust itself to the changing scale size of coronal holes and to temporally varying intensities. To make full use of the information in the three wavelengths we construct a composite CH distribution, which is more robust than distributions based on one wavelength. Using the composite CH dataset we discuss the temporal evolution of CHs during the Solar Cycles 23 and 24.  相似文献   

Three‐dimensional texture of natural pseudotachylyte: Pseudotachylyte formation mechanism in hydrous accretionary complex          下载免费PDF全文

Yohei Hamada  Gaku Kimura  Jun Kameda  Asuka Yamaguchi  Mari Hamahashi  Rina Fukuchi  Yujin Kitamura  Shin'ya Okamoto 《Island Arc》2018,27(2)

Melt‐origin pseudotachylyte is the most reliable seismogenic fault rock. It is commonly believed that pseudotachylyte generation is rare in the plate subduction zone where interstitial fluids are abundant and can trigger dynamic fault‐weakening mechanisms such as thermal pressurization. Some recent studies, however, have discovered pseudotachylyte‐bearing faults in exhumed ancient accretionary complexes, indicating that frictional melting also occurrs during earthquakes in subduction zones. To clarify the pseudotachylyte generation mechanism and the variation of slip behavior in the plate subduction zone, a pseudotachylyte found in the exhumed fossil accretionary complex (the Shimanto Belt, Nobeoka, Japan) was re‐focused and microscopic and three‐dimensional observations of the pseudotachylyte‐bearing fault were performed based on optical, electron, and X‐ray microscope images. Based on the patterns contained in the fragment, the pseudotachylyte is divided into four domains, although no clear domain boundaries or layering structures are not found. Three‐dimensional observation also suggests that the pseudotachylyte were fragmented or isolated by cataclasite or carbonate breccia. The pseudotachylyte was rather injected into the surrounding carbonate breccia, which is composed of angular fragments of the host rock and a matrix of tiny crystalline carbonate. The pseudotachylyte volume was extracted from the X‐ray microscope image and the heat abundance consumed by the pseudotachylyte generation was estimated at 2.18 MJ/m², which can be supplied during a slip of approximately 0.5 m. These observations and calculations, together with the results of the previous investigations, suggest hydrofracturing and rapid carbonate precipitation that preceded or accompanied the frictional melting. Dynamic hydrofracturing during a slip can be caused by rapid fluid pressurization, and can induce abrupt decrease in fluid pressure while drastically enhancing the shear strength of the shear zone. Consequently, frictional heating would be reactivated and generate the pseudotachylyte. These deformation processes can explain pseudotachylyte generation in hydrous faults with the impermeable wall rock.  相似文献   

Temporal stress variations along a seismogenic megasplay fault in the subduction zone: An example from the Nobeoka Thrust,southwestern Japan          下载免费PDF全文

Ryoji Kawasaki  Yoshitaka Hashimoto  Makoto Otsubo  Asuka Yamaguchi  Yujin Kitamura  Jun Kameda  Yohei Hamada  Rina Fukuchi  Gaku Kimura 《Island Arc》2017,26(3)

The Nobeoka Thrust, an ancient megasplay fault in the Shimanto Belt, southwestern Japan, contains fault rocks from the seismogenic zone, providing an accessible analog of active megasplay faults in deep subduction settings. In this study, the paleostress along the Nobeoka Thrust was analyzed using multiple inversion techniques, including k‐means clustering of fault datasets acquired from drillcores that intersected the thrust. The six resultant stress orientation clusters can be divided into two general groups: stress solutions with north–south‐trending σ₁ axes, and those with east–west‐trending σ₁ axes. These groups are characterized by the temporal changes for the orientations of the σ₁ and σ₃ principal stress axes that involve alternation between horizontal and vertical. The findings are probably due to a change in stress state before and after earthquakes that occurred on the fault; similar changes have been observed in active tectonic settings, such as the 2011 Tohoku‐Oki earthquake (Japan).  相似文献   

A tool for hierarchical climate regionalization   总被引：1，自引：0，他引：1  

Hamada S. Badr  Benjamin F. Zaitchik  Amin K. Dezfuli 《Earth Science Informatics》2015,8(4):949-958

  相似文献   

IAU Colloquium No. 134 nonlinear phenomena in stellar variability     

T. Hamada  M. Takeuti 《Astrophysics and Space Science》1993,210(1-2):vii-vii

  相似文献   

Standing stock and production rate of phytoplankton and a red tide outbreak in a heavily eutrophic embayment, Dokai Bay, Japan.   总被引：4，自引：0，他引：4  

K Tada  M Morishita  K Hamada  S Montani  M Yamada 《Marine pollution bulletin》2001,42(11):1177-1186

The seasonal variation of phytoplankton biomass and primary productivity in a heavily eutrophic embayment, Dokai Bay, Japan, was determined. Dokai Bay was characterized by high phytoplankton biomass and productivity during summer and low phytoplankton biomass and productivity during other seasons. The results suggested that phytoplankton growth was limited by only irradiance and water temperature under the high nutrient concentrations available for phytoplankton growth in the entire year. Moreover, in spite of sufficient nutrient for phytoplankton growth in the entire year, a red tide occurred only in the summer period in this bay. Our results suggested that a red tide occurred by the high phytoplankton growth rate in the summer season, but in other periods surface phytoplankton was flushed out of the bay before forming the red tide, because phytoplankton growth rate was low and could not form the red tide due to low irradiance and low water temperature.  相似文献