Genetic Structure and Diversity of the Moon Jellyfish Aurelia coerulea Polyp Population in Jaran Bay,Korea, Revealed by Mitochondrial COI and 16S rRNA Genes     

Seo  Yoseph  Muhammad  Buhari Lawan  Chae  Jinho  Ki  Jang-Seu 《Ocean Science Journal》2021,56(1):99-105

Ocean Science Journal - Blooms of the moon jellyfish (Aurelia coerulea) have been responsible for huge economic losses and environmental disruptions in oceans around the world. The mass occurrence...  相似文献   

Imaging of Stratigraphic Pinch-Out Traps Within the Lower-Cretaceous Shaly-Sandstone System,Pakistan, Using 3D Quantitative Seismic Inverted Porosity–Velocity Modeling     

Naseer  Muhammad Tayyab 《Natural Resources Research》2021,30(6):4297-4327

Incised valleys form excellent stratigraphic pinch-out traps. Traditional seismic data analysis techniques fail to predict quantitatively the porous and low-velocity sand-fills for incised valleys. The 3D quantitative seismic inverted porosity–velocity (3DQSIPV) analysis was applied in the Indus Basin, SW Pakistan. The reflection strength attribute better portrayed the reservoir sandstone and faults compared to seismic amplitude attribute. The sweetness-based continuous wavelet transform authenticated the development of the stratigraphic play. The 17 Hz amplitude delineated the non-porous seal and porous reservoirs of sand-filled incised valley and strand plain, and faults. The integrated model of seismic attributes categorizes the reservoir and seal constituents. The petrophysical modeling corroborated the gas-bearing “sweet-spots” within the stratigraphic-based dynamical system. The facies modeling predicted the for coarse-grained sandstone and fine-grained shales, depositional environments, fluctuations of sea level and their impacts on the overall development of stratigraphic plays. The predicted density and P-wave velocity for the sandstone-filled incised valley of the lowstand system tract were?~?1.4–1.75 g/cc and?~?3217–3802 m/s, respectively. The predicted density and P-wave velocity for the sealing shales facies of strand plain of transgressive system tract were?~?1.9–2.1 g/cc and 2.55–2.7 g/cc and 3900–4700 m/s, respectively. The 3DQSIPV predicted?>?25% porosity and?~?3300 m/s velocity of reservoirs in the west. The eastern zones shows?<?12% porosity and high velocity of?~?4580 m/s. Cross-plots of porosity, velocity, and thickness showed correlation coefficients of R²?>?0.90 for inverted velocity. This workflow may serve as an analogue for the remaining oil and gas fields of the Indus Basins of Pakistan and similar geological settings of divergent plate margins.

  相似文献   

Analysis of groundwater quality for irrigation purposes in shallow aquifers: A case study from West Aceh,Indonesia          下载免费PDF全文

Sayed Murtadha  Ismail Yussof  Rosmadi Fauzi  Ichwana Ramli 《Singapore journal of tropical geography》2017,38(2):185-200

The aim of this study is to evaluate the groundwater quality in shallow aquifers from West Aceh, Sumatra, for irrigation uses. Groundwater samples have been collected from 32 stations for pH, electrical conductivity (EC), sodium adsorption ratio (SAR), total dissolved solids (TDS), sodium percentage (per cent Na) and residual sodium carbonate (RSC) analysis. Evaluation of water quality for irrigation using the United States Salinity Laboratory classifications suggests that the majority of the groundwater samples are good for irrigation. The crop tolerance of irrigation water salinity, as based on EC value, showed that paddy (rice), soybeans and sweet tomatoes are suitable for agricultural cultivation, but that corn and field beans are not suitable. Results indicate that, if used for agricultural irrigation, the groundwater quality ranges from excellent to good, except for a few locations (e.g. Meureubo sub‐district) which indicate signs of deterioration.  相似文献   

Performance of CMORPH,TMPA, and PERSIANN rainfall datasets over plain,mountainous, and glacial regions of Pakistan     

Yawar?HussainEmail author  Frédéric?Satgé  Muhammad?Babar?Hussain  Hernan?Martinez-Carvajal  Marie-Paule?Bonnet  Martin?Cárdenas-Soto  Henrique?Llacer?Roig  Gulraiz?Akhter 《Theoretical and Applied Climatology》2018,131(3-4):1119-1132

The present study aims at the assessment of six satellite rainfall estimates (SREs) in Pakistan. For each assessed products, both real-time (RT) and post adjusted (Adj) versions are considered to highlight their potential benefits in the rainfall estimation at annual, monthly, and daily temporal scales. Three geomorphological climatic zones, i.e., plain, mountainous, and glacial are taken under considerations for the determination of relative potentials of these SREs over Pakistan at global and regional scales. All SREs, in general, have well captured the annual north-south rainfall decreasing patterns and rainfall amounts over the typical arid regions of the country. Regarding the zonal approach, the performance of all SREs has remained good over mountainous region comparative to arid regions. This poor performance in accurate rainfall estimation of all the six SREs over arid regions has made their use questionable in these regions. Over glacier region, all SREs have highly overestimated the rainfall. One possible cause of this overestimation may be due to the low surface temperature and radiation absorption over snow and ice cover, resulting in their misidentification with rainy clouds as daily false alarm ratio has increased from mountainous to glacial regions. Among RT products, CMORPH-RT is the most biased product. The Bias was almost removed on CMORPH-Adj thanks to the gauge adjustment. On a general way, all Adj versions outperformed their respective RT versions at all considered temporal scales and have confirmed the positive effects of gauge adjustment. CMORPH-Adj and TMPA-Adj have shown the best agreement with in situ data in terms of Bias, RMSE, and CC over the entire study area.  相似文献   

Vulnerabilities of macrophytes distribution due to climate change     

Hossain  Kaizar  Yadav  Sarita  Quaik  Shlrene  Pant  Gaurav  Maruthi  A. Y.  Ismail  Norli 《Theoretical and Applied Climatology》2017,129(3-4):1123-1132

Theoretical and Applied Climatology - The rise in the earth’s surface and water temperature is part of the effect of climatic change that has been observed for the last decade. The rates of...  相似文献   

Processes of initial collision and suturing between India and Asia   总被引：6，自引：0，他引：6  

Lin Ding  Satybaev Maksatbek  FuLong Cai  HouQi Wang  PeiPing Song  WeiQiang Ji  Qiang Xu  LiYun Zhang  Qasim Muhammad  Baral Upendra 《中国科学:地球科学(英文版)》2017,60(4):635-651

The initial collision between Indian and Asian continents marked the starting point for transformation of land-sea thermal contrast, uplift of the Tibet-Himalaya orogen, and climate change in Asia. In this paper, we review the published literatures from the past 30 years in order to draw consensus on the processes of initial collision and suturing that took place between the Indian and Asian plates. Following a comparison of the different methods that have been used to constrain the initial timing of collision, we propose that the tectono-sedimentary response in the peripheral foreland basin provides the most sensitive index of this event, and that paleomagnetism presents independent evidence as an alternative, reliable, and quantitative research method. In contrast to previous studies that have suggested collision between India and Asia started in Pakistan between ca. 55 Ma and 50 Ma and progressively closed eastwards, more recent researches have indicated that this major event first occurred in the center of the Yarlung Tsangpo suture zone (YTSZ) between ca. 65 Ma and 63 Ma and then spreading both eastwards and westwards. While continental collision is a complicated process, including the processes of deformation, sedimentation, metamorphism, and magmatism, different researchers have tended to define the nature of this event based on their own understanding, an intuitive bias that has meant that its initial timing has remained controversial for decades. Here, we recommend the use of reconstructions of each geological event within the orogenic evolution sequence as this will allow interpretation of collision timing on the basis of multidisciplinary methods.  相似文献   

DHI evaluation by combining rock physics simulation and statistical techniques for fluid identification of Cambrian-to-Cretaceous clastic reservoirs in Pakistan     

Nisar Ahmed  Perveiz Khalid  Hafiz Muhammad Bilal Shafi  Patrick Connolly 《Acta Geophysica》2017,65(5):991-1007

The use of seismic direct hydrocarbon indicators is very common in exploration and reservoir development to minimise exploration risk and to optimise the location of production wells. DHIs can be enhanced using AVO methods to calculate seismic attributes that approximate relative elastic properties. In this study, we analyse the sensitivity to pore fluid changes of a range of elastic properties by combining rock physics studies and statistical techniques and determine which provide the best basis for DHIs. Gassmann fluid substitution is applied to the well log data and various elastic properties are evaluated by measuring the degree of separation that they achieve between gas sands and wet sands. The method has been applied successfully to well log data from proven reservoirs in three different siliciclastic environments of Cambrian, Jurassic, and Cretaceous ages. We have quantified the sensitivity of various elastic properties such as acoustic and extended elastic (EEI) impedances, elastic moduli (K _sat and K _sat–μ), lambda–mu–rho method (λρ and μρ), P-to-S-wave velocity ratio (V _P/V _S), and Poisson’s ratio (σ) at fully gas/water saturation scenarios. The results are strongly dependent on the local geological settings and our modeling demonstrates that for Cambrian and Cretaceous reservoirs, K _sat–μ, EEI, V _P/V _S, and σ are more sensitive to pore fluids (gas/water). For the Jurassic reservoir, the sensitivity of all elastic and seismic properties to pore fluid reduces due to high overburden pressure and the resultant low porosity. Fluid indicators are evaluated using two metrics: a fluid indicator coefficient based on a Gaussian model and an overlap coefficient which makes no assumptions about a distribution model. This study will provide a potential way to identify gas sand zones in future exploration.  相似文献   

Sediment transport in high‐speed flows over a fixed bed: 2. Particle impacts and abrasion prediction          下载免费PDF全文

Christian Auel  Ismail Albayrak  Tetsuya Sumi  Robert M. Boes 《地球表面变化过程与地形》2017,42(9):1384-1396

Single bed load particle impacts were experimentally investigated in supercritical open channel flow over a fixed planar bed of low relative roughness height simulating high‐gradient non‐alluvial mountain streams as well as hydraulic structures. Particle impact characteristics (impact velocity, impact angle, Stokes number, restitution and dynamic friction coefficients) were determined for a wide range of hydraulic parameters and particle properties. Particle impact velocity scaled with the particle velocity, and the vertical particle impact velocity increased with excess transport stage. Particle impact and rebound angles were low and decreased with transport stage. Analysis of the particle impacts with the bed revealed almost no viscous damping effects with high normal restitution coefficients exceeding unity. The normal and resultant Stokes numbers were high and above critical thresholds for viscous damping. These results are attributed to the coherent turbulent structures near the wall region, i.e. bursting motion with ejection and sweep events responsible for turbulence generation and particle transport. The tangential restitution coefficients were slightly below unity and the dynamic friction coefficients were lower than for alluvial bed data, revealing that only a small amount of horizontal energy was transferred to the bed. The abrasion prediction model formed by Sklar and Dietrich in 2004 was revised based on the new equations on vertical impact velocity and hop length covering various bed configurations. The abrasion coefficient k_v was found to be vary around k_v ~ 10⁵ for hard materials (tensile strength f_t > 1 MPa), one order of magnitude lower than the value assumed so far for Sklar and Dietrich's model. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Updated earthquake catalogue for seismic hazard analysis in Pakistan     

Sarfraz Khan  Muhammad Waseem  Muhammad Asif Khan  Waqas Ahmed 《Journal of Seismology》2018,22(4):841-861

A reliable and homogenized earthquake catalogue is essential for seismic hazard assessment in any area. This article describes the compilation and processing of an updated earthquake catalogue for Pakistan. The earthquake catalogue compiled in this study for the region (quadrangle bounded by the geographical limits 40–83° N and 20–40° E) includes 36,563 earthquake events, which are reported as 4.0–8.3 moment magnitude (M_W) and span from 25 AD to 2016. Relationships are developed between the moment magnitude and body, and surface wave magnitude scales to unify the catalogue in terms of magnitude M_W. The catalogue includes earthquakes from Pakistan and neighbouring countries to minimize the effects of geopolitical boundaries in seismic hazard assessment studies. Earthquakes reported by local and international agencies as well as individual catalogues are included. The proposed catalogue is further used to obtain magnitude of completeness after removal of dependent events by using four different algorithms. Finally, seismicity parameters of the seismic sources are reported, and recommendations are made for seismic hazard assessment studies in Pakistan.  相似文献   

The 2014 Earthquake Model of the Middle East: seismogenic sources     

Laurentiu Danciu  Karin Şeşetyan  Mine Demircioglu  Levent Gülen  Mehdi Zare  Roberto Basili  Ata Elias  Shota Adamia  Nino Tsereteli  Hilal Yalçın  Murat Utkucu  Muhammad Asif Khan  Mohammad Sayab  Khaled Hessami  Andrea N. Rovida  Massimiliano Stucchi  Jean-Pierre Burg  Arkady Karakhanian  Hektor Babayan  Mher Avanesyan  Tahir Mammadli  Mahmood Al-Qaryouti  Doğan Kalafat  Otar Varazanashvili  Mustafa Erdik  Domenico Giardini 《Bulletin of Earthquake Engineering》2018,16(8):3465-3496

  相似文献