Redeposition of volcaniclastic sediments by a tsunami 4600 years ago at Kushima City,south-eastern Kyushu,Japan     

Masaki Yamada  Shigehiro Fujino  Takashi Chiba  Kazuhisa Goto  James Goff 《Sedimentology》2020,67(3):1354-1372

The Hyuga-nada Sea, south-eastern Kyushu, Japan, is located between a strong (Nankai Trough) and a weak interplate coupling zone (Ryukyu Trench). Over the past 400 years this area has only experienced Magnitude 7·5 earthquakes or smaller and associated small-scale tsunamis. However, this short historical record most likely does not include the full range of high magnitude, low frequency giant earthquakes that might have occurred in the region. Thus, it is still unclear whether giant earthquakes and their associated tsunamis have occurred in this region. This paper reports on a prehistoric tsunami deposit discovered in a coastal lowland in south-eastern Kyushu facing the Hyuga-nada Sea. There is a reddish-brown pumiceous layer preserved in a non-marine, organic-rich mud sequence obtained from onshore sediment cores. This layer is recognized as the ca 4600 year old Kirishima-Miike tephra (that is now placed around 4500 years ago) sourced from Mount Kirishima, southern Kyushu. Another whitish pumiceous layer is evident below the Kirishima-Miike tephra in almost all of the sediment cores. A relatively high percentage of marine and brackish diatoms is recorded within this lower pumiceous layer (but not in the surrounding muds or in the overlying Kirishima-Miike tephra), indicating a marine or beach sediment source. Plant material obtained from organic-rich mud immediately below the event layer was dated to ca 4430 to 4710 cal yr bp , providing a limiting-maximum age for this marine incursion event. The presence of marine diatoms below the event layer is probably explained by pre-seismic subsidence. An absence of the resting spore of the planktonic brackish diatom Cheatoceros and the appearance of the freshwater diatom Eunotia serra immediately above the event layer probably represents a marked change to a relatively low-salinity environment. Assuming that there were no significant local geomorphological changes, such as drainage obstruction caused by formation of a new barrier spit, it is considered that co-seismic or immediate post-seismic uplift are the most likely explanations for this notable environmental change. Based on the crustal movements noted before and after the marine incursion, this event is interpreted here as an earthquake-generated tsunami. Moreover, because of these notable seismic crustal movements the tsunamigenic earthquake probably occurred immediately offshore of the study site.  相似文献   

High-Reflectivity Coatings for a Vacuum Ultraviolet Spectropolarimeter     

Noriyuki Narukage  Masahito Kubo  Ryohko Ishikawa  Shin-nosuke Ishikawa  Yukio Katsukawa  Toshihiko Kobiki  Gabriel Giono  Ryouhei Kano  Takamasa Bando  Saku Tsuneta  Frédéric Auchère  Ken Kobayashi  Amy Winebarger  Jim McCandless  Jianrong Chen  Joanne Choi 《Solar physics》2017,292(3):40

Precise polarization measurements in the vacuum ultraviolet (VUV) region are expected to be a new tool for inferring the magnetic fields in the upper atmosphere of the Sun. High-reflectivity coatings are key elements to achieving high-throughput optics for precise polarization measurements. We fabricated three types of high-reflectivity coatings for a solar spectropolarimeter in the hydrogen Lyman-\(\upalpha \) (Ly\(\upalpha \); 121.567 nm) region and evaluated their performance. The first high-reflectivity mirror coating offers a reflectivity of more than 80 % in Ly\(\upalpha \) optics. The second is a reflective narrow-band filter coating that has a peak reflectivity of 57 % in Ly\(\upalpha \), whereas its reflectivity in the visible light range is lower than 1/10 of the peak reflectivity (\(\sim 5~\%\) on average). This coating can be used to easily realize a visible light rejection system, which is indispensable for a solar telescope, while maintaining high throughput in the Ly\(\upalpha \) line. The third is a high-efficiency reflective polarizing coating that almost exclusively reflects an s-polarized beam at its Brewster angle of 68° with a reflectivity of 55 %. This coating achieves both high polarizing power and high throughput. These coatings contributed to the high-throughput solar VUV spectropolarimeter called the Chromospheric Lyman-Alpha SpectroPolarimeter (CLASP), which was launched on 3 September, 2015.  相似文献   

Ab initio study on carbon Kinetic Isotope Effect (KIE) in the reaction of CH4+Cl•     

Noriyuki Tanaka  Yitian Xiao  Antonio C. Lasaga 《Journal of Atmospheric Chemistry》1996,23(1):37-49

Recent studies suggest that the destruction of methane by Cl in the marine boundary layer could be accounted for as another major sink besides the methane destruction by OH. High level ab initio molecular orbital calculations have been carried out to study the CH₄+Cl reaction, the carbon Kinetic Isotope Effect (KIE) is calculated using Conventional Transition-State Theory (CTST) plus Wigner and Eckart semiclassical tunneling corrections. The calculated KIE is around 1.026 at 300 K and has a small temperature variation. This is by far the largest KIE among different processes involving atmospheric methane destruction (e.g., OH, soil). A calculated mass balance of atmospheric methane including the KIE for the CH₄+Cl reaction is found to favor those methane budgets with enhanced biological methane sources, which have relatively lighter carbon isotope composition.  相似文献   

Recognizing cryptic environmental changes by using paleoecology and taphonomy of Pleistocene bivalve assemblages in the Oga Peninsula,northern Japan     

Tomoki Chiba  Masaaki Shirai  Shin'ichi Sato 《Quaternary Research》2014

Multivariate analyses applied to Pleistocene bivalve assemblages from the Oga Peninsula (northern Japan) discriminate three distinct assemblages. The assemblages and their taphonomy were used to recognize environmental settings and changes. The Astarte–Cyclocardia–Glycymeris assemblage indicates shelf environment (below the storm wave base) where gravels and shells are transported from shallower settings. Supply of the exotic coarse sediment probably enabled epifaunal bivalves to inhabit the sea floor. The Glycymeris assemblage is characterized by dominance of G. yessoensis and represents current-swept shoreface environment (above the storm wave base). The Moerella assemblage is characterized by bivalves inhabiting bay to open-marine conditions and diverse deposit-feeders, indicating a moderately land-locked environment, such as an open bay or a bay mouth. Fine-grained substrata rich in organic matters in the bay were probably suitable for the deposit-feeders. Ordination also shows the assemblages along two environmental gradients, a bathymetrical one and the other related to open-marine and bay conditions. The environmental changes are explained mainly by glacio-eustatic sea-level changes and alternation of coastal geomorphology caused by local crustal movements. This study also suggests that fossil assemblages can be a powerful tool to reconstruct environments and depositional dynamics even in intensely bioturbated sedimentary facies.  相似文献   

Experimental evaluation and parameterization of evaporation from soil surface     

Jidong Teng  Noriyuki Yasufuku  Qiang Liu  Shiyu Liu 《Natural Hazards》2014,73(3):1405-1418

Surface evaporation is one of the main processes in the soil–atmosphere interaction. Since it is highly related to meteorological factors and soil properties, determination of evaporation rate from soil surface remains a challenge. To investigate the evaporation from unsaturated soil, a climate control apparatus has been newly developed, which has a feature of completely controlling air temperature, relative humidity and wind speed. Twelve climatic conditions are applied to three kinds of soil specimens to carry out the evaporation tests. The results show that only water content cannot allow an accurate estimation, additional variables accounting for soil texture and wind speed must be included as well. Moreover, a simple approach to parameterize evaporation is presented by the soil moisture θ of top 1-cm layer with considering the effect of soil texture and wind speed. It is found that the new approach is able to accurately estimate the evaporation from unsaturated soil.  相似文献   

Cross-sectional profiles of Baltis Vallis channel on Venus: Reconstructions from Magellan SAR brightness data     

Shoko Oshigami  Noriyuki Namiki 《Icarus》2007,190(1):1-14

Baltis Vallis is a 6800-km long canali-type channel on Venus. Canali have a unique combination of morphological characteristics: extraordinary length, a single main conduit, and a degree of similarity to terrestrial rivers. These characteristics have given rise to intensive discussions on whether the origin of canali is erosional or constructional. Cross-sectional profiles of such channels reveal the detailed morphology of the structure and enable us to distinguish between these two possible origins; however, canali are just several kilometers wide and are therefore too small for the construction of cross-sectional profiles from Magellan altimetry data. Instead, we propose a new method for reconstructing short-wavelength topography using brightness data from Synthetic Aperture Radar images. We apply Muhleman's backscattering function to the backscatter intensity calculated from the brightness of Magellan Full-Resolution SAR Map images. The estimated vertical error of this new method is less than 5 m for a distance of 1 km across the channel. We studied 120 sites along an approximately 6000 km extent of Baltis Vallis. The channel profiles reveal that in nearly 90% of these sites, the bottom surface of the channel is lower than the surrounding plains by 20-100 m. Clear levee structures and intra-channel ridges are recognized in about 30 and 25%, respectively, of the sites analyzed within Baltis Vallis. Most of the levees occur in the upper segment of Baltis Vallis, while intra-channel ridges are mostly confined to the region between 1500 and 3000 km downstream from the probable source. The average depth and width of the channel are 46 m (standard deviation: 16 m) and 2.2 km (standard deviation: 0.4 km), respectively, and the depth profile along the channel is highly undulatory. The groove-like morphology and paucity of levee structures indicates an erosional origin. Furthermore, the observed undulations in depth along the channel indicate that Baltis Vallis most likely formed by mechanical erosion. The observed morphological transition from levees to intra-channel ridges suggests that the channel-forming processes changed across an area located approximately 1500 km from the source. Carbonatite is the most likely candidate material for the low-viscosity fluid that formed Baltis Vallis.  相似文献   

Aeolian dust experiment on climate impact: An overview of Japan–China joint project ADEC   总被引：1，自引：1，他引：0  

M. Mikami  G.Y. Shi  I. Uno  S. Yabuki  Y. Iwasaka  M. Yasui  T. Aoki  T.Y. Tanaka  Y. Kurosaki  K. Masuda  A. Uchiyama  A. Matsuki  T. Sakai  T. Takemi  M. Nakawo  N. Seino  M. Ishizuka  S. Satake  K. Fujita  Y. Hara  K. Kai  S. Kanayama  M. Hayashi  M. Du  Y. Kanai  Y. Yamada  X.Y. Zhang  Z. Shen  H. Zhou  O. Abe  T. Nagai  Y. Tsutsumi  M. Chiba  J. Suzuki 《Global and Planetary Change》2006,52(1-4):142

The Aeolian Dust Experiment on Climate Impact (ADEC) was initiated in April 2000 as a joint five-year Japan–China project. The goal was to understand the impact of aeolian dust on climate via radiative forcing (RF). Field experiments and numerical simulations were conducted from the source regions in northwestern China to the downwind region in Japan in order to understand wind erosion processes temporal and spatial distribution of dust during their long-range transportation chemical, physical, and optical properties of dust and the direct effect of radiative forcing due to dust. For this, three intensive observation periods (IOP) were conducted from April 2002 to April 2004.The in situ and network observation results are summarized as follows: (1) In situ observations of the wind erosion process revealed that the vertical profile of moving sand has a clear size dependency with height and saltation flux and that threshold wind velocity is dependent on soil moisture. Results also demonstrated that saltation flux is strongly dependent on the parent soil size distribution of the desert surface. (2) Both lidar observations and model simulations revealed a multiple dust layer in East Asia. A numerical simulation of a chemical transport model, CFORS, illustrated the elevated dust layer from the Taklimakan Desert and the lower dust layer from the Gobi Desert. The global-scale dust model, MASINGAR, also simulated the dust layer in the middle to upper free troposphere in East Asia, which originated from North Africa and the Middle East during a dust storm in March 2003. Raman lidar observations at Tsukuba, Japan, found the ice cloud associated with the dust layer at an altitude of 6 to 9 km. Analysis from lidar and the radio-sonde observation suggested that the Asian dust acted as ice nuclei at the ice-saturated region. These results suggest the importance of dust's climate impact via the indirect effect of radiative forcing due to the activation of dust into ice nuclei. (3) Studies on the aerosol concentration indicated that size distributions of aerosols in downwind regions have bimodal peaks. One peak was in the submicron range and the other in the supermicron range. The main soluble components of the supermicron peak were Na⁺, Ca²⁺, NO₃⁻, and Cl⁻. In the downwind region in Japan, the dust, sea salt, and a mixture of the two were found to be dominant in coarse particles in the mixed boundary layer. (4) Observation of the optical properties of dust by sky-radiometer, particle shoot absorption photometer (PSAP), and Nephelometer indicated that unpolluted dust at source region has a weaker absorption than originally believed.A sensitivity experiment of direct RF by dust indicated that single scattering albedo is the most important of the optical properties of dust and that the sensitivity of instantaneous RF in the shortwave region at the top of the atmosphere to the refractive index strongly depends on surface albedo. A global scale dust model, MASINGAR, was used for evaluation of direct RF due to dust. The results indicated the global mean RF at the top and the bottom of the atmosphere were − 0.46 and − 2.13 W m^− 2 with cloud and were almost half of the RF with cloud-free condition.  相似文献   

Mira variables in the Galactic bulge with OGLE-II data     

Noriyuki Matsunaga  Hinako Fukushi  Yoshikazu Nakada 《Monthly notices of the Royal Astronomical Society》2005,364(1):117-125

  相似文献   

The Tiger Sulfide Chimney,Yonaguni Knoll IV Hydrothermal Field,Southern Okinawa Trough,Japan: The First Reported Occurrence of Pt–Cu–Fe‐Bearing Bismuthinite and Sn‐Bearing Chalcopyrite in an Active Seafloor Hydrothermal System     

Kaul Gena  Hitoshi Chiba  Katsuo Kase  Kazuo Nakashima  Daizo Ishiyama 《Resource Geology》2013,63(4):360-370

A sulfide chimney ore sampled from the flank of the active Tiger vent area in the Yonaguni Knoll IV hydrothermal field, south Okinawa trough, consists of anhydrite, pyrite, sphalerite, galena, chalcopyrite and bismuthinite. Electron microprobe analysis indicates that the chalcopyrite contains up to 2.4 wt% Sn, whereas bismuthinite contains up to 1.7 wt% Pt, 0.8 wt% Cu and 0.5 wt% Fe. The Sn‐rich chalcopyrite and Pt–Cu–Fe‐bearing bismuthinite are the first reported occurrence of such minerals in an active submarine hydrothermal system. The results confirm that Sn enters the chalcopyrite as a solid solution towards stannite by the coupled substitution of Sn⁴⁺Fe²⁺ for Fe³⁺Fe³⁺, whereas Pt, Cu and Fe enter the bismuthinite structure as a solid solution during rapid nucleation. The fluid inclusions homogenization temperatures in anhydrite (220–310°C) and measured end‐member temperature of the vent fluids on‐site (325°C) indicate that Sn‐bearing chalcopyrite and Pt–Cu–Fe‐bearing bismuthinite express the original composition of the minerals that precipitated as metastable phases at a temperature above 300°C. The result observed in this study implies that sulfides in ancient volcanogenic massive sulfide deposits have similar trace element distribution during nucleation but it is remobilised during diagenesis, metamorphism or supergene enrichment processes.  相似文献   

Survivability of presolar oxygen isotopic signature of amorphous silicate dust in the protosolar disk     

Daiki Yamamoto  Shogo Tachibana  Noriyuki Kawasaki  Hisayoshi Yurimoto 《Meteoritics & planetary science》2020,55(6):1281-1292

Oxygen isotope exchange experiments between tens of nanometer‐sized amorphous enstatite grains and water vapor were carried out under a condition of protoplanetary disk‐like low water vapor pressure in order to investigate the survivability of distinct oxygen isotope signatures of presolar silicate grains in the protosolar disk. Oxygen isotope exchange between amorphous enstatite and water vapor proceeded at 923–1003 K and 0.3 Pa of water vapor through diffusive isotope exchange in the amorphous structure. The rate of diffusive isotope exchange is given by D (m² s^–1) = (5.0 ± 0.2) × 10^–21 exp[–161.3 ± 1.7 (kJ mol^–1) R^–1 (1/T–1/1200)]. The activation energy for the diffusive isotope exchange for amorphous enstatite is the same as that for amorphous forsterite within the analytical uncertainties, but the isotope exchange rate is ~30 times slower in amorphous enstatite because of the difference in frequency factor of the reaction. The reaction kinetics indicates that 0.1–1 μm‐sized presolar amorphous silicate dust with enstatite and forsterite compositions would avoid oxygen isotope exchange with protosolar disk water vapor only if they were kept at temperatures below ~500–650 K within the lifetime of the disk gas.  相似文献