排序方式： 共有127条查询结果，搜索用时 15 毫秒
111.
Diagenetic and very low-grade metamorphic characteristics of the Paleozoic series of the Istanbul Terrane (NW Turkey) 总被引：1，自引：0，他引：1
The Istanbul Terrane along the Black Sea coast in NW Anatolia, is a Gondwana-derived continental microplate, comprising a well-developed Paleozoic succession. Petrographic and X-ray diffraction studies were performed on rock samples from measured sections throughout Ordovician?CCarboniferous sedimentary units. Diagenetic-very low-grade metamorphic clastic (shale/mudstone, siltstone, sandstone) and calcareous rocks (limestone, dolomite) mainly contain phyllosilicates, quartz, feldspar, calcite, dolomite, hematite and goethite minerals. Phyllosilicates are primarily represented by illite, chlorite, mixed-layered chlorite?Cvermiculite (C?CV), chlorite?Csmectite (C?CS) and illite?Cchlorite (I?CC). Feldspar is commonly present in the Ordovician and Carboniferous units, whereas calcite and dolomite are abundant in the Silurian and Devonian sediments. The most important phyllosilicate assemblage is illite?+?chlorite?+?I?CC?+?C?CV?+?C?CS. Illite and chlorite-bearing mixed layer clays are found in all units. The amounts of illites increase in the upper parts of the Silurian series and the lower parts of the Devonian series, whereas chlorite and chlorite-bearing mixed-layers are dominant in the Ordovician and Carboniferous units. Kübler index values of illites reflect high-grade anchimetamorphism for the Early Ordovician rocks, low-grade metamorphism to high-grade diagenesis for the Middle Ordovician?CEarly Silurian rocks and high-grade diagenesis for the Late Silurian?CDevonian units. The K-white micas b cell dimensions indicate intermediate pressure conditions in the Early Ordovician?CEarly Silurian units, but lower pressure conditions in the Middle Silurian?CDevonian units. Illites are composed of 2M 1?±?1M d polytypes in all units, except for Upper Ordovician?CLower Silurian units which involve 1M polytype in addition to 2M 1 and 1M d polytypes. The 2M 1/(2M 1?+?1Md) ratios rise from Devonian to Ordovician together with the increasing diagenetic-metamorphic grade. Chlorites have IIb polytype. In general, crystal-chemical data of clay minerals in the Istanbul Terrane show a gradual increase in the diagenetic/metamorphic grade together with increasing depth. The new data presented in this work indicate that the diagenetic/metamorphic grade of the Paleozoic of the Istanbul Terrane is higher than that of the neighboring Zonguldak Terrane and generated by a single metamorphic phase developed at the end of Carboniferous. This finding contrasts with the metamorphic history of the neighboring Zonguldak Terrane that displays a distinct Early Devonian unconformity and a thermal event. 相似文献
112.
Evaluation of engineering-geological conditions for conurbation of Ostrava (Czech Republic) within GIS environment 总被引：4，自引：4，他引：0
The main aim of the presented study was to create a new type of engineering-geological maps for relative costs for foundation engineering. The newly proposed map in this paper can replace the formerly used maps of the suitability for foundation engineering which shows only the suitable and/or unsuitable sites and suggests the use of suitable areas for construction only. However, there are developed technologies that they can overcome the potential problems in unsuitable areas by relatively high costs. It means that unsuitable areas can also be used as construction areas. Therefore, the use of the newly proposed map of relative costs, which reflects the complexity of geo-factors by proportional category of larger, or smaller relative costs is satisfactory. Another part of this research was to assess various geo-factors (engineering-geological zones, workability of rocks, pre-Quaternary bedrock, flood land, radon hazard, mining subsidence and slope movements), which affect the foundation of future buildings. This study was carried out in the large industrial city of Ostrava in the Czech Republic with complicated engineering geological conditions and high anthropogenic influence factors including undermining. The use of complicated relationships is also generally difficult to be taken into account by the planners. Therefore, the use of the newly created synthetic map by planners is simple; even planners who are not geologists will be able to apply it easily. 相似文献
113.
This paper focuses on the performance of two regression-based and one Inverse Distance Weighted (IDW) and two combined versions of IDW methods for interpolation of daily mean temperature at the Black Sea Region of Turkey. Simple linear regression (SLR) and multiple linear regression (MLR) are used as regression-based methods. Combinations of IDW with TLR (temperature lapse rate) and gradient plus inverse distance squared (GIDS) are used as combined versions of IDW. This study targets to compare five spatial interpolation methods based on RMSE (root-mean-square error) statistics of interpolation errors for daily mean temperatures from 1981 to 2012. In order to compare the interpolation errors of the five methods, the leave-one-out cross-validation method was applied over long periods of 32 years on 52 different sites. The algorithms of the five interpolation methods’ codes were written in MATLAB by the authors of the paper. 相似文献
114.
Onur ?al??kan ?hsan ?i?ek Andreas Matzarakis 《Theoretical and Applied Climatology》2012,107(3-4):417-425
Climate is an important resource for tourism and an equally important element that needs to be included in tourism promotions. This study reveals Bursa’s bioclimatological conditions. These conditions were identified by using physiologically equivalent temperature and a Climate–Tourism–Information–Scheme over 10-day periods and analyzing the mean thermal perception values that emerged. Evaluating bioclimatic conditions and meteorological parameters such as air temperature, duration of sunshine, number of wet days, amount of precipitation, and wind from the perspective of tourism will help people choose the best holiday times depending on their individual needs and circumstances. 相似文献
115.
Morpho-tectonic evolution of the Marmara Sea inferred from multi-beam bathymetric and seismic data 总被引：1，自引：6，他引：1
Erkan?Goka?anEmail author Timur?Usta?mer Cem?Gazio?lu Zeki?Ya?ar?Yucel Kurultay??ztürk Hüseyin?Tur Berkan?Ecevito?lu Bu?ser?Tok 《Geo-Marine Letters》2003,23(1):19-33
In an initial stage, the Sea of Marmara developed as a graben and, in due course, considerable volumes of sediments were deposited in this basin. Before 200 ka, a new fault (New Marmara Fault) cutting through the whole basin developed, which postdated large sub-marine land sliding in the western part of the basin. This mass movement created the Western Ridge. The initiation of this strike-slip fault indicates that the extensional stress regime was replaced by a new, shearing stress field. In the eastern part of the Marmara Basin, the New Marmara Fault consists of two branches. The northern one replaces the normal faulting at the bottom of the northeastern slope of the basin. As a result, this slope has been rejuvenated. The southern branch is located along the central axis of the basin, forming the major extension of the North Anatolian Fault Zone within the region. Two restraining bends were formed because of the counterclockwise rotation of that part of the Anatolian Block. This resulted the uplifting of the Eastern Ridge and the formation of the positive flower structure within the Tekirdag Basin. The establishment of the compressional regime around the Sea of Marmara also resulted in the northwest–southeast shortening of the initial Marmara Basin. 相似文献
116.
Summary Metamorphic rocks in the pre-Alpine basement of the Getic-Supragetic units (Median Dacides of the Carpathian belt) are spatially related to different lithotectonic units, some of which contain high-pressure relicts reflecting an early stage of oceanic and continental subduction, locally synchronous with mylonitic shear zones. Kyaniteamphibole ± quartz-bearing eclogites preserve a complete metamorphic clockwise loop; the estimated peak conditions within the outer part of the Cumpana unit were at least 20 kb at 780–860 °C. Pre-eclogite-stage magmatic phases occur in some units with true equilibrated eclogites. Clinopyroxene-plagioclase inclusions in garnet of a garnet-clinopyroxene assemblage within a metagabbro indicate a temperature around 760–790 °C at a maximum pressure of about 19 kb. The units finally evolved together during stages of exhumation under metamorphic conditions ranging from the Barrovian-type (minimum age of 330 Ma) to the high-temperature/low-pressure type. The absolute age of the high-pressure stage and the eclogite protoliths is unknown. In comparison with other collision belts, it is likely that the gneiss units of the Median Dacides underwent a complete cycle of underthrusting and exhumation similar to other segments of the European Variscides, and that the formation of the eclogite occurred during the early stages of subduction.
With 9 Figures 相似文献
Résumé Les roches métamorphiques du socle pré-alpin des domaines Gétiques et Supragétiques (Dacides médianes de la chaîne des Carpathes) appartiennent à des unités lithotectoniques différentes dont certaines contiennent des reliques de métamorphisme haute pression reflétant un stade précoce de subduction continentale et océanique, localement synchrone de zones de cisaillement mylonitiques. Des éclogites é disthène-amphibole ± quartz permettent de reconstituer un trajet PT horaire complet. Les conditions paroxysmales sont estimées au sein de l'unité de Cumpana é plus de 20 kb pour 780–860 °C. Des phases magmatiques pré-éclogitiques coexistent avec des phases de haute pression dans les éclogites de certaines unités et des inclusions de clinopyroxene-plagioclase dans les grenats d'un métagabbro indiquent une température de 760–790 °C pour une pression maximale de 19 kb. L'ensemble des unités évolue finalement durant les stades d'exhumation sous les mêmes conditions de métamorphisme barrovien (âge minimum de 330 Ma) puis de haute température-basse pression. L'âge du stade de haute pression et des protholithes reste inconnu. En comparaison avec d'autres chaînes de collision, il est vraisemblable que les Dacides médianes ont subi un cycle d'enfouissement et d'exhumation similaire é celui décrit dans d'autres segments de la chaîne varisque européenne, la formation des éclogites étant attribuée aux premiers stades de la subduction.
With 9 Figures 相似文献
117.
Slobodan?MikoEmail author Goran?Durn Renata?Adamcová Marta??ovi? Mária?Dubíková Rastislav?Skalsky Sanja?Kapelj Franz?Ottner 《Environmental Geology》2003,45(2):262-272
With the use of the optimised three-step BCR sequential-extraction procedure it was possible to assess the mobility of selected elements in soil profiles from Croatian and Slovakian karst terrains. The soils in the Croatian karst were enriched in Cr, Ni, V, Mn, Cu, Cd and Mo, while soils from the Slovak Karst had high Pb and Zn concentrations. It was determined that the elements were most readily mobilised from the topsoil and the degree of mobility decreased with depth. Cr and Ni were mainly bound to the residual fraction, and Pb in the oxidisable fraction. Cu mobility was high in samples treated with agrochemicals throughout the soil profile. 相似文献
118.
The average layered structure of the intracratonic Paraná Basin, SE Brazil, is investigated with surface-wave group velocities
from a small regional earthquake recorded by two broadband stations. Rayleigh and Love waves in the period range 1–4.2 s are
used to infer average properties down to about 4 km. Genetic algorithm techniques are used to find the best fitting 1-D S-wave
model. The inverted 1-D models show fair correlation with the average properties of the propagation paths as expected from
geology and borehole information. However, different S-wave velocity models are obtained for the different inversion parameterizations.
Since lateral heterogeneities are expected along the paths, several synthetic tests are performed with heterogeneous propagation
paths. For approximately homogenous path (i.e., little lateral variation), the main features of the average synthetic model
can be retrieved for different model parameterizations. For strong lateral variations, however, the average dispersion curve
can produce very different 1-D inverted models depending on the parameterization. Also, the 1-D inverted models may differ
significantly from the average properties of the inhomogeneous path, and wrong depths to interfaces may be inferred. For real
data inversions, it is then suggested that various different parameterizations should be tested. If the resulting models show
consistent features, this probably indicates homogeneity in the propagation path. But, if very different and unstable features
are obtained in the 1-D inversions, then strong lateral variation may be present in the propagation path, and the average
1-D model may not represent average properties along the path. 相似文献
119.
Turkey has been divided into eight different seismic regions taking into consideration the tectonic environments and epicenters
of the earthquakes to examine relationships of the modal values (a/b), the expected maximum magnitudes (Mmax) and the maximum intensities (Imax). For this purpose, the earthquakes for the time period 1900–1992 from the Global Hypocenter Data Base CD-ROM prepared by
USGS, and for the time period 1993–2001 from the PDE data and IRIS data are used. Concerning the relationships developed between
different magnitude scales and between surface wave magnitudes (MS) and intensity for different source regions in Turkey, we have constructed a uniform catalog of MS. We have estimated the values of Mmax and Imax using the Gumbel III asymptotic distribution. Highest a-values are observed in the Aegean region and the lowest b-values are estimated for the North Anatolian Fault. Maximum values of a/b, Mmax and Imax are related to the eastern and western part of the North Anatolian Fault and the Aegean Arc. The lowest values of all parameters
are observed near the Mid Anatolian Fault system. Linear relationships have been calculated between a/b, Mmax and Imax using orthogonal regression. If one of the three parameters is computed, two other parameters can be calculated empirically
using these linear relationships. Hazard maps of Mmax and Imax values are produced using these relationships for a grid of equally spaced points at 1°. It is observed that the maps produced
empirically may be used as a measure of seismic hazard in Turkey. 相似文献
120.
U. W.?Bl??Email author F.?Langenhorst T.?Boffa-Ballaran F.?Seifert D. J.?Frost C. A.?McCammon 《Physics and Chemistry of Minerals》2004,31(1):52-65
A new oxygen-deficient perovskite with the composition Ca(Fe0.4Si0.6)O2.8 has been synthesised at high-pressure and -temperature conditions relevant to the Earths transition zone using a multianvil apparatus. In contrast to pure CaSiO3 perovskite, this new phase is quenchable under ambient conditions. The diffraction pattern revealed strong intensities for pseudocubic reflections, but the true lattice is C-centred monoclinic with a=9.2486 Å, b=5.2596 Å, c=21.890 Å and =97.94°. This lattice is only slightly distorted from rhombohedral symmetry. Electron-diffraction and high-resolution TEM images show that a well-ordered ten-layer superstructure is developed along the monoclinic c* direction, which corresponds to the pseudocubic [111] direction. This unique type of superstructure likely consists of an oxygen-deficient double layer with tetrahedrally coordinated silicon, alternating with eight octahedral layers of perovskite structure, which are one half each occupied by silicon and iron as indicated by Mössbauer and Si K electron energy loss spectroscopy. The maximum iron solubility in CaSiO3 perovskite is determined at 16 GPa to be 4 at% on the silicon site and it increases significantly above 20 GPa. The phase relations have been analysed along the join CaSiO3–CaFeO2.5, which revealed that no further defect perovskites are stable. An analogous phase exists in the aluminous system, with Ca(Al0.4Si0.6)O2.8 stoichiometry and diffraction patterns similar to that of Ca(Fe0.4Si0.6)O2.8. In addition, we discovered another defect perovskite with Ca(Al0.5Si0.5)O2.75 stoichiometry and an eight-layer superstructure most likely consisting of a tetrahedral double layer alternating with six octahedral layers. The potential occurrence of all three defect perovskites in the Earths interior is discussed. 相似文献