This study presents an innovative technique of executing soil nails called sectorized post grouting (SPG). The most utilized technique of soil nail grouting is gravity grouting, with the literature reporting advances in pressurized grouting. Although obtaining higher pullout resistance of soil nails, pressurized grouting, mostly done in single-stage grouting, does not compensate for exudation and its use in higher nail lengths is difficult. Thus, a technique has been developed that compensates for exudation, with easier application in lengthier nails. The technique was qualitatively assessed to evaluate its surface roughness and later applied in seven real soil nailing works, where it could be quantitatively assessed. The results show that sectorized post-grouted nails obtained greater pullout resistances than gravity grouted and single-stage grouted nails. Although similar improvement was found in tube-à-manchette (TAM) grouted nails, this method presents lower economic efficiency than sectorized post grouting. The pullout resistance results obtained in this study can be utilized in future soil nailing works executed utilizing SPG.
Debris flows are hazardous phenomena occurring at volcanoes, and monitoring them has proved as challenging as imperative in several cases. The use of seismic instruments to measure and study the physical properties of debris flows has witnessed significant progress in the last years, with the use of improved sensors, innovative methodologies and high-resolution analysis. However, the application of such studies to the practical task of providing early warnings remains limited by the significant amount of infrastructural and technological resources commonly required for their deployment. In Ecuador, debris flows at volcanoes are detected by means of seismic instruments which are usually part of broader monitoring networks, thus requiring calibration to provide quantitative information about the flows and feed early-warning systems. In the present work, a theoretical approach based on the Buckingham Π-theorem is used to determine an expression that linearly correlates the seismic signal produced by a transiting debris flow with its discharge rate, for instruments installed in different substrata and at variable distances from the drainage. The expression is experimentally tested with Acoustic Flow Monitors and Broad-band seismometers installed in the vicinity of drainages at Tungurahua and Cotopaxi volcanoes, where actual debris flows occurred in relation to eruptive activity. The experiments consist in comparing the measured peak amplitude values of the seismic signal envelopes with the estimated peak discharge rates of several events. The results confirm the validity of the theoretical expression with linear correlations observed between the seismic amplitudes and the discharge rates, thus defining calibration expressions that can be generally applied to varied environments and instruments. The seismic instruments calibrated through this methodology can provide instantaneous and reliable predictions of debris flow discharge rates within less than an order of magnitude and only requiring limited data processing and storage. Such level of prediction could help to improve early warning systems based on seismic instruments installed in locations where more developed instrumental arrays are unavailable or unpractical.
The quartz veins containing scheelite from Fonte Santa mine cut the Lower Ordovician quartzites. A muscovite–biotite granite (G1) and a muscovite granite (G2), both S-type, crop out close to the Fonte Santa mine and are related to the Moncorvo–Bemposta shear zone. The most altered samples of G2 show intense muscovitization and microclinization and contain chlorite, columbite–tantalite, wolframite, W-ixiolite and Fe-oxides. The tin-bearing granites contain 18 ppm (G1) and 73 ppm (G2) Sn. The most altered samples of G2 correspond to a tungsten granite. The quartz veins contain muscovite, chlorite, tourmaline, scheelite, pyrrhotite, pyrite, sphalerite, chalcopyrite, galena, arsenopyrite, iron oxides, Fe sulfates, phosphates of Pb, Fe and Al. The Fonte Santa mine area was exploited for W between 1942 and 1982. At the end of November 2006, a flood event damaged the tailings dam of Fonte Santa mine, releasing contaminated material and increasing contaminant levels in water within the area of influence of the mine. The waters related to the Fonte Santa mine are poorly mineralized, with electrical conductivity of < 965 µS/cm, and of a mixed type or HCO3− and SO42− types. Most pH values (5.0−8.5) indicate that there is no significant acidic drainage in the region, as found in other areas. More acidic values (pH = 3.4) were found in the mine's lagoon. Waters associated with mineralized veins and old mine activities have Fe and Mn concentrations that forbid their use for human consumption and agriculture. Natural Na, Mg and K water contents are associated with the alteration of albite, chlorite and muscovite of country rock, while Ca with the W-bearing quartz veins. Weathering agents are carbonic and sulphuric acids and the latter has a strong influence in areas draining fine-grained mine tailings. 相似文献
The 1957–1958 eruption of Capelinhos, Faial island, Azores, involved three periods of surtseyan, hydromagmatic activity: two in 1957 and one in 1958. Deposits from this eruption are exposed both in sea cliffs cut into the flanks of the tuff cone and more distally >1 km from the vent. Five lithofacies are identified: lithofacies I is composed of even thickness beds with laterally continuous internal stratigraphy and is interpreted to have been formed by fallout. Lithofacies II consists of beds with internally discontinuous lenses, and has sand-wave structures that increase in abundance toward the outer margins of the tuff cone. This lithofacies is interpreted as having been deposited from pyroclastic surges. Lithofacies III is composed of mantle-bedded deposits with laterally discontinuous internal stratigraphy. This lithofacies is interpreted to have been formed by hybrid processes where fallout of tephra occurred simultaneously with pyroclastic surges. In the outer flanks of the tuff cone, lithofacies III grades laterally into fallout beds of lithofacies I. Lithofacies IV consists of alternating beds of coarse ash aggregates and non-aggregated fine ash, and is particularly well developed in distal regions. Some of this facies was formed by fallout. Alternating beds also occur plastered against obstacles up to 2 km from the vent, indicating an origin from wet pyroclastic surges. The orientation of plastered tephra indicates that the surges were deflected by topography as they decelerated. The distinction between surge and fallout in distal regions is uncertain because wind-drifted fallout and decelerating surge clouds can generate similar deposits. Lithofacies V consists of scoria lapilli beds interpreted to be fallout from hawaiian-style fire-fountaining in the later stages of the eruption. Juvenile pyroclasts within hydromagmatic deposits are predominantly poorly vesicular (25–60% of clasts <30% vesicles). However, on both micro- and macroscopic scales, there is a wide range in clast vesicularity (up to 70% vesicles) indicating that, although fragmentation was predominantly hydromagmatic, vesiculation and magmatic-volatile-driven fragmentation operated simultaneously. 相似文献
Liquid motions in shallow Tuned Liquid Dampers (TLDs) with rectangular, circular, and annular tanks, subject to harmonic base excitation, are measured experimentally. Using a Single-Degree-of-Freedom (SDOF) Tuned Mass Damper (TMD) analogy, equivalent mass, stiffness and damping of the TLD are calibrated from the experimental results. These parameters are functions of the TLD base amplitude. Some important properties of the TLD are discussed on the basis of these results. 相似文献
Biostratigraphic research, based on palynomorphs and ammonoids, of the tectonically imbricated lithological succession of the Neves Corvo mine, in the Portuguese part of the Iberian Pyrite Belt, has yielded ages for all formerly recognised lithostratigraphic units. These can be assembled in three main lithological sequences: (1) detrital sandy/shale substrate (Phyllite-Quartzite Formation) of late Famennian age; (2) Volcano-Sedimentary Complex, divided into a lower and an upper suite, in which one basic, three dolerite sills and four felsic volcanic units and a mineralised package of massive sulphides are identified with ages which range from the late Famennian to the late Visean; (3) flysch succession (Mértola Formation) composed of shale and greywacke dated as late Visean to early Serpukhovian. Precise biostratigraphic dating of the sedimentrary host rocks of massive sulphide mineralisation constrains the age of the latter to the late Strunian (354.8–354.0 Ma). Three stratigraphic hiatuses, corresponding to early/middle Strunian, Tournaisian and early Visean respectively and a south-westward progressive unconformity were also recognised. Sequences 1 and 2 are related to extensional episodes while sequence 3 marks the beginning of compressive tectonic inversion which gave rise to south-westward flysch progradation in close relation to a foreland basin development. Our results lead to the reinterpretation of the tectonic structure of the Neves Corvo mine, with implications for the interpretation of the regional basin dynamics and metal exploration.Editorial handling: F. Tornos 相似文献
This paper introduces a new statistical method that we recommend should become standard procedure to quantify the goodness-of-fit of calibration and validation for land-use change models. We present a multiple-resolution Relative Operating Characteristic (ROC) that measures the goodness-of-fit between a reference map, which is considered reality, and a simulated map, which is a model’s output. This proposed ROC is based on: (1) multiple-resolutions, (2) soft classification, (3) sampling without replacement, and 4) explicit separation of factors of quantity versus location of land-use change. We illustrate the method with a case study in India’s Western Ghats, a biodiversity hotspot, where we have maps of cumulative forest disturbance for 1920 and 1990. We use a predictive modeling approach similar to GEOMOD in which we calibrate the model with the map of 1920, then predict the map of 1990, at which point we subject the model to validation. We show that the fit of calibration tends to be much larger than the fit of validation. Thus if a modeler assess a model by goodness-of-fit of calibration only, then the modeler will likely be over confident in the model’s predictive ability. 相似文献
In this study, more than 20 minor and trace elements have been determined by INAA (instrumental neutron activation analysis), in different species of lichens in three Portuguese islands of the Central North Atlantic (Santa Maria, Terceira, and Madeira Islands). The foliose species Parmotrema bangii, Parmotrema robustum, Parmotrema crinitum, Flavoparmelia caperata, Platismatia glauca, and the fruiticose species Ramalina canariensis, Ramalina farinacea, Ramalina implectens, Ramalina pusilla, Cladonia furcata, Cladonia coniocraea, Usnea dasaea, Usnea esperantiana, were the collected species. Samples of superficial soils were also collected and the fraction below 64 m was analysed. The enrichment factors relative to this fraction using Al as the normalising element were calculated. Fruiticose and foliose lichens displayed different EF values concerning bromine and potassium. The first was more enriched in the foliose species while the latter was more enriched in the fruiticose species and was assigned to the physiological response. Enrichment was found for Mg, Cs, As, Hg, Na, Zn, and Cl, in all the species. Lichen-based concentration patterns were shown for Na, Al, Cl, Br, Sb, Ce, and Hg and compared to similar patterns in Portugal mainland. In general, the patterns compared well except for Cl, Na, and Br. Background levels of the epiphytic lichens collected in the islands were obtained. 相似文献
We have calculated the spectrum of Cyg X-1 under the assumption that the radiation orginates in a disk around a 11M black-hole. Supersonic turbulence prevails in the outer parts of the disk and electron-electron bremsstrahlung appears to be resonsible for the maintenance of the temperature at a level less than 1010 K near the inner edge of the disk. The theoretical spectrum gives the best fit with the observations if the Reynolds number is about 1200. 相似文献
An inventory of artesian springs emerging from fractures (fracture springs) was conducted in the Pinh?o River Basin and Morais
Massif, northern Portugal, comprising an area of approximately 650 km2. Over 1,500 springs were identified and associated with geological domains and fracture sets. Using cross-tabulation analysis,
spring distributions by fracture sets were compared among geological environments, and the deviations related to differences
in rock structure and, presumably, to differences in deformational histories. The relation between spring frequencies and
rock structures was further investigated by spectral determination, the model introduced in this study. Input data are the
spring frequencies and fracture lengths in each geological domain, in addition to the angles between fracture strikes and
present-day stress-field orientation (θ). The model's output includes the so-called intrinsic densities, a parameter indexing spring occurrence to factors such as
fracture type and associated deformational regime and age. The highest densities (12.2 springs/km of lineament) were associated
with young shear fractures produced by brittle deformation, and the lowest (0.1) with old tensional and ductile fractures.
Spectral determination also relates each orientation class to a dominant structural parameter: where spring occurrence is
controlled by θ, the class is parallel to the present-day stress-field orientation; where the control is attributed to the length of fractures,
the spring occurrence follows the strike of large-scale normal faults crossing the region.
Electronic Publication 相似文献
