Evolution of the Axial Geometry of the Southwest Indian Ocean Ridge between the Melville Fracture Zone and the Indian Ocean Triple Junction – Implications for Segmentation on Very Slow-Spreading Ridges     

Parson  Lindsay  Sauter  Daniel  Mendel  Véronique  Patriat  Philippe  Searle  Roger 《Marine Geophysical Researches》1997,19(6):535-552

Geophysical data from 900 km of the Southwest Indian Ridge are used todescribe the pattern of evolution of the plate boundary between 61° Eand 70° E over the past 20 million years. The SWIR is anobliquely-opening, ultra slow-spreading axis, and east of61° E comprises a series of ridge sections, each about 100–120 kmin length. The orientation of these sections varies fromsub-orthogonal to oblique to the approximately N–S spreadingdirection. In general, the suborthogonal sections are shallower, commonlysubdivided into an array of discrete axial segments, and carry recognisablecentral magnetic anomalies. The majority of the oblique sections are single,continuous rifts without continuous axial magnetic signatures.Morphotectonics of the Southwest Indian Ridge crust have not previously beenwell constrained off-axis, and we here present sidescan sonar andswath bathymetric data up to 100 km from the ridge to demonstrate the complexities of its spatial and temporal evolution.A model is proposed that the segmentation style correlates with analong-axis variation between: (a) relatively thick crustal sections which overlie mantle sections with higher magmatic supply created in orthogonally-spreading segments and (b) those oblique sections associated with cooler, magmatically-starved mantle and thinner crust. These latter sections are formed at broad offset zones in theplate boundary, more precisely defined on faster-spreading ridges asnontransform discontinuities. The nonsystematic pattern of crustalconstruction, extensional basin formation and the absence of extension-parallel traces of discontinuities off-axis suggest that the oblique spreading sections are not fixed in space or time.  相似文献   

Impact pressure of breaking waves on vertical and sloping walls     

M Salih Kirkgz 《Ocean Engineering》1991,18(1-2)

Laboratory tests are conducted to measure the impact pressures of breaking waves on vertical, 5° forward, and 5, 10, 20, 30, and 45° backward sloping walls. The base structure of the wall has a foreshore slope of . Regular waves are used throughout the experiments for all wall angles. The maximum impact pressures on the wall are shown to satisfy the log-normal probability distribution. It is found from the present experiments that the impact pressures and resulting forces on sloping walls can be greater than those on a vertical wall. On the seven different walls tested, the maximum impact pressures occur most frequently slightly below the still-water level. The pattern of the impact pressure history does not change with the slope of the wall, and as the probability of maximum impact pressure decreases, the pressures around the peak pressure region of the impact pressure histories remain longer.  相似文献   

Breaking wave impact on vertical and sloping coastal structures     

M. S. Kirkgz 《Ocean Engineering》1995,22(1)

The results of laboratory experiments on the maximum and bottom impact pressures from waves breaking directly on vertical and sloping faced coastal structures are presented. Direct wave breaking on a wall is classified as early, late, and perfect breaking. Although the present study is aimed at dealing with the type of impact resulting from the perfect breaking, to some extent the occurrence of early and late breaking are unavoidable. The wave impact pressures, therefore, have a random nature of variation from impact-to-impact under the same conditions. The maximum and bottom impact pressures on walls are treated statistically. The effects of the wall angle and foreshore slope on these two quantities are examined. The results show that for practical applications, the still-water level can be taken as the acting place for the maximum impact pressure on the wall. Simultaneous impact pressure distribution below and above still-water level may be approximated as parabolic and linear, respectively. Finally, using a wall deflection criterion, a water depth region in front of the wall is defined, where the breaking wave forces may reach a critical level.  相似文献   

A map series of the Southern East Pacific Rise and its flanks, 15° S to 19° S     

Daniel S. Scheirer  Ken C. Macdonald  Donald W. Forsyth  Stephen P. Miller  Dawn J. Wright  Marie-Hélène Cormier  Charles M. Weiland 《Marine Geophysical Researches》1996,18(1):1-12

Four large-scale bathymetric maps of the Southern East Pacific Rise and its flanks between 15° S and 19° S display many of the unique features of this superfast spreading environment including abundant seamounts (the Rano Rahi Field), axial discontinuities, discontinuity migration, and abyssal hill variation. Along with a summary of the regional geology, these maps will provide a valuable reference for other sea-going programs on-and off-axis in this area, including the Mantle ELectromagnetic and Tomography (MELT) experiment.  相似文献   

Prolonged Magmatic and Tectonic Development of the Caribbean Igneous Province Revealed by a Diving Submersible Survey     

Mauffret  Alain  Leroy  Sylvie  Vila  Jean-Marie  Hallot  Erwan  Mercier de Lépinay  Bernard  Duncan  Robert A. 《Marine Geophysical Researches》2001,22(1):17-45

Using the diving submersible survey NAUTICA we investigated the central part of the Caribbean large igneous province (CLIP) to observe and sample internal portions of this proposed oceanic plateau. Most of the samples are gabbroic and doleritic rocks; basalts are scarce. Radiometric dating by ⁴⁰Ar/³⁹Ar incremental heating experiments indicate that the intrusive rocks are Campanian in age (81–75 Ma). In some places these intrusive rocks underlie older Santonian (85–83 Ma) extrusive basaltic rocks, suggesting that the Campanian rocks represent a sill injection and an underplating episode. Results of the diving program supplemented by information from ODP and DSDP drilling sites document a 20 m.y. period (94–75 Ma) of igneous activity in the submerged portion of the Caribbean large igneous province (CLIP). In the northern part of the Beata Ridge late Campanian and/or post Campanian uplift is documented by prominent Maastrichtian (71–65 Ma) erosion and the establishment of a Paleocene-middle Eocene (65–49 Ma) carbonate platform. During and after the uplift an extensional period is indicated by seismic images and the subsidence (3 km depth) of the carbonate platform. Paleocene ages (55–56 Ma) determined on some volcanic samples are attributed to localised decompression mantle melting that accompanied the extension. We document a prolonged period of magmatic and tectonic events that do not fit with the current models of short-lived plateau formation during mantle plume initiation but shares many similarities with the constructional histories of other oceanic large igneous provinces.  相似文献   

Size distribution of colloidal trace metals and organic carbon during a coastal bloom in the Baltic Sea   总被引：1，自引：0，他引：1  

Johan Ingri  Susanna Nordling  Jenny Larsson  Jenny Rnnegrd  Nina Nilsson  Ilia Rodushkin  Ralf Dahlqvist  Per Andersson   rjan Gustafsson 《Marine Chemistry》2004,91(1-4):117-130

The physico-chemical speciation of organic carbon and selected metals was measured during a coastal bloom in Ekhagen Bay, Baltic Sea, using ultrafiltration.One important objective with the study was to see if any depletion of trace metals could be measured in the directly bioavailable fraction (<1000 Da, the soluble low molecular weight fraction, LMW) during a plankton bloom. Filters with five different cut-offs were used (1 kD (1000 Da), 5 kD, 10 kD, 100 kD and 0.22 μm) in order to delineate the size distribution of colloidal organic carbon (COC) and trace metals.During the bloom in May, LMW Al, Co, Cu, Mn and Ni concentrations decreased although the colloidal and particulate concentrations were relatively high. Data show that desorption of colloidal and particulate bound trace metals to the LMW fraction was slower than the process depleting the LMW fraction.Estimates of the maximum active uptake of Cu, Ni and Mn by the phytoplankton, and the loss of non-bioactive Al from the LMW fraction, indicate that processes other than active uptake by phytoplankton must contribute to the observed depletion of trace metals in the LMW fraction. Hence, in order to estimate the bioavailable pool of trace metals for plankton during bloom conditions, these other processes must be understood and quantified.Transparent Exopolymeric Particles (TEP, reflecting sugar-rich phytoplankton exudates) increased around eight times during the plankton bloom. We hypothesize that the formation of TEP is a process that might be important for the transfer of trace metals from the LMW to the particulate fraction during the phytoplankton bloom, but the significance of TEP for this depletion in Baltic Sea surface water remains to be shown.  相似文献   

The Huelva (Spain) Tsunami-Ready Station and Its Interaction with Storm Emma (March 2018)     

Jue Lin-Ye  Begoña Pérez-Gómez  Enrique Álvarez-Fanjul  Javier García-Valdecasas 《Marine Geodesy》2020,43(5):509-539

Abstract

The sea level station operating since 1996 at Mazagón (Huelva, Spain) has been progressively upgraded to fit tsunami warning requirements, due to its location in one of the main regions at risk. Its radar water level sensor was complemented in 2017, with the addition of a pressure sensor. The performance of both sea level sensors and their response to sea level oscillations, at different frequencies, is assessed. Particular emphasis is put on the effect of extreme events, such as Storm Emma, when alternative methods to obtain 1-min data are tested, in contrast to the one based on arithmetic means. The overall differences are small, for the whole period of study (centered-root-mean-square-error below 1?cm, for 5-min, and hourly data; similar tidal parameters and sea level oscillations with periods between 30?s and 5?min). However, during Storm Emma, the pressure sensor presents sensibly lower readings than the radar, with the centered-root-mean-square-error rising to 80?mm on the March 2^nd 2018. A new method to compute 1-min data, based on medians, reduced this value to 10?mm for the same day.  相似文献   

Otolith shape as a stock discrimination tool for ling (Genypterus blacodes) in the fjords of Chilean Patagonia     

Rodrigo Wiff  Andrés Flores  Angel M. Segura  Mauricio A. Barrientos  Vilma Ojeda 《新西兰海洋与淡水研究杂志》2020,54(2):218-232

ABSTRACT

Genypterus blacodes, in terms of its fishing history and local economic importance, is an emblematic species harvested in Chilean Patagonia (41°00’–57°00’S). Most of the current fisheries and biological knowledge of this species come from the open ocean, whereas information about the species in fjords and inner channels is fragmentary. In 2018, two research surveys targeting G. blacodes were conducted in the fjords and inner channels of Chilean Patagonia. A total of 253 pairs of sagittal otoliths were sampled at three different localities, and their contours were modelled using wavelet analysis as a tool for stock discrimination. Contours were compared using canonical analysis, and classification was performed using linear discriminant and Random Forest analyses. The results indicated that the wavelet method is efficient in modelling otolith contours, and the discriminant analyses showed differences among fishing grounds across the latitudinal gradient, thus confirming the hypothesis that G. blacodes conform to at least two separate stock units in Chilean Patagonia. Fishing grounds that were closer in space showed higher levels of misclassification. The discussion focuses on how environmental variables and the geography of fjords shape stock differences and how this information can be used for the sustainable management of G. blacodes.  相似文献   

Preliminary attempt to characterize the rotation of seafloor in the Pito Deep area of the Easter Microplate using a submersible magnetometer     

R.N. Hey  F. Martinez  S. Diniega  D.F. Naar  J. Francheteau  R. Armijo  M. Constantin  J.P. Cogné  J. Girardeau  R. Hekinian  R. Searle 《Marine Geophysical Researches》2002,23(1):1-12

Several mechanisms have been proposed to account for the rotation of the nearly north-south abyssal hill fabric formed on the East Pacific Rise north of the Easter Microplate to the nearly east-west trends in the northern microplate interior. Proposed mechanisms include rigid microplate rotation, transform fault – parallel shear, and bookshelf faulting during the transfer of lithosphere from the Nazca Plate to the microplate. We used a submersible magnetometer on a NAUTILE dive program to measure the magnetic vector rotation of a pillow basalt and dike spur near Pito Deep, the present location of the tip of the propagating rift system that created the microplate. Our results, although too limited to draw strong conclusions from, suggest clockwise rotations of the seafloor magnetic vectors inconsistent with the transform-parallel shear model, and larger than can be explained solely by rigid microplate rotation.  相似文献   

Active spreading and hydrothermalism in North Fiji Basin (SW Pacific). Results of Japanese French Cruise Kaiyo 87     

Jean-Marie Auzende  Eiichi Honza  Xavier Boespflug  Satendra Deo  Jean-Philippe Eissen  Jun Hashimoto  Philippe Huchon  Junichiro Ishibashi  Yo Iwabuchi  Philip Jarvis  Masato Joshima  Kiyoyuki Kisimoto  Yasuto Kuwahara  Yves Lafoy  Tsuyoshi Matsumoto  Jean-Pierre Maze  Kiyohiko Mitsuzawa  Hiroyasu Monma  Takeshi Naganuma  Yukihiro Nojiri  Suguru Ohta  Kiyoshi Otsuka  Yoshihisa Okuda  Hélène Ondreas  Akira Otsuki  Etienne Ruellan  Myriam Sibuet  Manabu Tanahashi  Takeo Tanaka  Tetsuro Urabe 《Marine Geophysical Researches》1990,12(4):269-283

The aim of the Japanese-French Kaiyo 87 cruise was the study of the spreading axis in the North Fiji Basin (SW Pacific). A Seabeam and geophysical survey allowed us to define the detailed structure of the active NS spreading axis between 16° and 22° S and its relationships with the left lateral motion of the North Fiji Fracture Zone. Between 21° S and 18°10′ S, the spreading axis trends NS. From 18°10 S to 16°40 S the orientation of the spreading axis changes from NS to 015°. North of 16°40′ S the spreading axis trends 160°. These two 015° and 160° branches converge with the left lateral North Fiji fracture zone around 16°40′ S to define an RRFZ triple junction. Water sampling, dredging and photo TV deep towing give new information concerning the hydrothermal activity along the spreading axis. The discovery of hydrothermal deposits associated with living communities confirms this activity.  相似文献