Petroleum hydrocarbons in sediments of Southampton water estuary     

Anthony H. Knap  Peter J. LeB. Williams  Elizabeth Lysiak 《Marine environmental research》1982,7(4):235-249

The sediments of Southampton Water were analysed for petroleum hydrocarbons to determine the fate of petrochemical refinery waste in the estuary. Much of the petroleum hydrocarbons appears to be removed by adsorption onto estuarine sediments close to source. Surface sediment concentrations range from 3·1mg/g dry weight near a refinery to 0·5 mg/g dry weight at locations distant from the refinery.The absence of any change with depth in total hydrocarbon concentrations from some sediment cores and the presence of distinct ‘oil’ horizons in others suggests that mixing of sediments in the area is very random. Sedimentation rates in areas where a distinct oil horizon was observed ranged from 1 to 3cm a year.  相似文献   

The safe use by divers of a high current pulse generator in studies of the behaviour of marine fish in electric fields     

Stewart  Peter A. M.; Cameron  George M. 《ICES Journal of Marine Science》1974,36(1):62-70

  相似文献   

Experimental investigation of the combustive sound source   总被引：3，自引：0，他引：3  

Wilson  P.S. Ellzey  J.L. Muir  T.G. 《Oceanic Engineering, IEEE Journal of》1995,20(4):311-320

In this paper, we describe a unique low frequency underwater sound source called the combustive sound source (CSS). In this device, a combustible gas mixture is captured in a combustion chamber and ignited with a spark. The ensuing combustion produces expanding gases which in turn produce high intensity, low frequency acoustic pulses. With high-speed motion pictures of the CSS event, we relate the motion of the bubble to the acoustic waveform. We also compare the measured first bubble period in the CSS pressure signature with the predictions of the Rayleigh-Willis equation, including the dependence of the radiated acoustic waveform on the volume and depth of the bubble. Measurements of the first bubble period agree with Rayleigh-Willis theory in trend, but not in absolute value. In addition, we discuss the variation of the acoustic output with the fuel/oxygen mixture. Finally, several other factors that affect the acoustic output of CSS are discussed. These include the shape of the CSS combustion chamber, the type of oxidizer and fuel, and the ignition source  相似文献   

Bioavailability: the organism as sensor     

Peter J. Wangersky  Regine L. Maass 《Marine Chemistry》1991,36(1-4)

The use of a system of continuous culture of phytoplankton at constant population density, the ‘cage-culture’ turbidostat, as a monitor of the bioavailability of pollutant materials, is illustrated. In the case of proposed dredge spoils from two polluted areas, it is shown that bulk analyses for scheduled materials cannot be equated with bioavailability. Monitoring for the effect of the whole pollutant mixture on a properly chosen test population could obviate the necessity for chemical analyses for each component.  相似文献   

Parametric modelling of joint probability density distributions for steepness and asymmetry in deep water waves     

Dag Myrhaug  Sren Peter Kjeldsen 《Applied Ocean Research》1984,6(4):207-220

Traditional wave steepness s = H/L does not define steep asymmetric waves uniquely. Three additional parameters characterising single zero-downcross waves in a time series are crest front steepness, vertical asymmetry factor and horizontal asymmetry factor. Parametric models for joint probability density distributions for deep water waves are presented. The joint distributions are for crest front steepness-wave height, vertical asymmetry factor-wave height, total wave steepness-wave height and wave height-wave period. The parametric models are estimated from zero-downcross analysis of wave data obtained from measurements at sea on the Norwegian continental shelf. The results of the analysis presented here can be used in the estimation of the probabilities of occurrence of steep asymmetric waves and breaking waves in deep water. Thus the results are useful for the practical naval architect and ocean engineer who are considering unusual events in the sea, the associated accidents or responses and the probability of occurrence of such events.  相似文献   

Imposex still evident in eastern Australia 10 years after tributyltin restrictions     

Gibson CP  Wilson SP 《Marine environmental research》2003,55(2):101-112

A survey of imposex in Thais orbita (Neogastropoda) along the New South Wales (NSW) coast, Australia, found imposex was still widespread 10 years after a partial ban on tributyltin (TBT) based antifouling paints. Transplant experiments also revealed that imposex was induced in T. orbita over a period of 9 weeks in Sydney Harbour, NSW. A comparison of the imposex data with that collected shortly after the introduction of restrictions on TBT revealed a general decline in imposex frequency occurring at open coast sites, an exception being the site at South West Rocks. Sites located within harbour/bay areas did not display a decline in imposex frequency but a decline in the severity of imposex was apparent. The observed decrease in imposex values in T. orbita may reflect a general decrease of butyltin contamination within the coastal environment. However, the persistence of contamination "hotspots" within harbours and bays remains a concern.  相似文献   

Multiscale Terrain Analysis of Multibeam Bathymetry Data for Habitat Mapping on the Continental Slope   总被引：2，自引：0，他引：2  

Margaret F. J. Wilson  Brian O'Connell  Colin Brown  Janine C. Guinan  Anthony J. Grehan 《Marine Geodesy》2007,30(1):3-35

  相似文献   

Tidally incised valleys on tropical carbonate shelves: An example from the northern Great Barrier Reef, Australia     

Peter T. Harris  Andrew Heap  Vicki Passlow  Michael Hughes  James Daniell  Mark Hemer  Ole Anderson 《Marine Geology》2005,220(1-4):181-204

The formation of incised valleys on continental shelves is generally attributed to fluvial erosion under low sea level conditions. However, there are exceptions. A multibeam sonar survey at the northern end of Australia's Great Barrier Reef, adjacent to the southern edge of the Gulf of Papua, mapped a shelf valley system up to 220 m deep that extends for more than 90 km across the continental shelf. This is the deepest shelf valley yet found in the Great Barrier Reef and is well below the maximum depth of fluvial incision that could have occurred under a − 120 m, eustatic sea level low-stand, as what occurred on this margin during the last ice age. These valleys appear to have formed by a combination of reef growth and tidal current scour, probably in relation to a sea level at around 30–50 m below its present position.

Tidally incised depressions in the valley floor exhibit closed bathymetric contours at both ends. Valley floor sediments are mainly calcareous muddy, gravelly sand on the middle shelf, giving way to well-sorted, gravely sand containing a large relict fraction on the outer shelf. The valley extends between broad platform reefs and framework coral growth, which accumulated through the late Quaternary, coincides with tidal current scour to produce steep-sided (locally vertical) valley walls. The deepest segments of the valley were probably the sites of lakes during the last ice age, when Torres Strait formed an emergent land-bridge between Australia and Papua New Guinea. Numerical modeling predicts that the strongest tidal currents occur over the deepest, outer-shelf segment of the valley when sea level is about 40–50 m below its present position. These results are consistent with a Pleistocene age and relict origin of the valley.

Based on these observations, we propose a new conceptual model for the formation of tidally incised shelf valleys. Tidal erosion on meso- to macro-tidal, rimmed carbonate shelves is enhanced during sea level rise and fall when a tidal, hydraulic pressure gradient is established between the shelf-lagoon and the adjacent ocean basin. Tidal flows attain a maximum, and channel incision is greatest, when a large hydraulic pressure gradient coincides with small channel cross sections. Our tidal-incision model may explain the observation of other workers, that sediment is exported from the Great Barrier Reef shelf to the adjacent ocean basins during intermediate (rather than last glacial maximum) low-stand, sea level positions. The model may apply to other rimmed shelves, both modern and ancient.  相似文献   

Assessment of cytochrome P450 1A in harbour seals (Phoca vitulina) using a minimally-invasive biopsy approach     

Miller KA  Assunção MG  Dangerfield NJ  Bandiera SM  Ross PS 《Marine environmental research》2005,60(2):153-169

Biomarkers of organochlorine exposure, such as the induction of cytochrome P450 1A (CYP1A), can be used to assess the impact of environmental contaminants on the health of free-ranging marine mammal populations. The objective of the present study was to measure CYP1A in skin and liver biopsies obtained from live harbour seals (Phoca vitulina). Twelve harbour seal pups, aged three to five weeks, were captured from the Fraser River estuary, British Columbia, Canada, and temporarily held in captivity. Skin ( approximately 60 mg) and liver ( approximately 40 mg) biopsies, obtained while seals were under general anaesthesia, yielded sufficient tissue for the measurement of CYP1A by immunoblot analysis and ethoxyresorufin O-deethylase activity. A short-term exposure experiment, in which harbour seals (n=3) were treated orally with beta-naphthoflavone (BNF), resulted in increased hepatic and cutaneous CYP1A protein levels, consistent with observations in other mammals. This study is the first to measure CYP1A in skin and liver biopsies from live harbour seals and to report in vivo BNF-associated CYP1A induction in a marine mammal. The results demonstrate that microsamples collected using minimally-invasive techniques can provide toxicologically-relevant information form marine mammals.  相似文献   

Design of a 3D Chirp Sub-bottom Imaging System     

Jonathan M. Bull  Martin Gutowski  Justin K. Dix  Timothy J. Henstock  Peter Hogarth  Timothy G. Leighton  Paul R. White 《Marine Geophysical Researches》2005,26(2-4):157-169

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.  相似文献