由星载GPS相位数据确定地球重力场模型若干问题研究   总被引：4，自引：4，他引：0  

郭金运  胡建国  常晓涛  朱习军 《测绘科学》2005,30(6):19-22

人造地球卫星在地球引力场中运动,可以探测地球重力场的长波信息。随着GPS技术的发展,星载GPS技术日趋成熟,因此由星载GPS相位数据确定地球重力场模型是当前国际地学研究的热点之一。本文给出了确定地球重力场模型中的星载GPS星地相位双差观测量,阐述了Cowell II数值轨道积分公式,导出了参数估计中星地双差观测量的偏导数,利用分块Bayes最小二乘参数估计地球引力场位系数等有关参数。  相似文献   

广义非线性动态最小二乘问题的一个直接解算方法   总被引：4，自引：3，他引：1  

陶华学  郭金运 《测绘科学》2005,30(2):13-15

构建“数字地球”、“数字国家”等数字化科学工程的基础是数据[1 ] ,其数据具有多源、多维、多种类型、多种时态、多种精度并具有非线性特征等特点[2 ] ,首先要进行数据处理并应采用全新的广义非线性动态最小二乘法[3] [4] ,数据处理方法的核心是广义非线性动态最小二乘问题参数估计的函数模型及其解算方法 ,迄今国内外对这方面的研究尚不多。本文在作者前期研究、提出的广义非线性动态最小二乘函数模型参数估计迭代法求解[5] 的基础上 ,进一步研究、提出了一种广义非线性动态最小二乘模型参数估计的直接解算方法 ,将问题分离 ,把待求参数减半 ,直接求解。从而大大降低求解问题的维数 ,大大减少计算难度和计算工作量 ,这是国内外首次研究提出的一种比迭代法更快速、更有效、更科学的解算方法。为多源、多类、多时态数据处理开辟了一新途径 ,也大大扩大了广义非线性动态最小二乘法的应用面  相似文献   

Heavy metal pollution in the soil surrounding a thermal power plant in Playas de Rosarito,Mexico     

M. A. Pastrana-Corral  F. T. Wakida  J. Temores-Peña  D. D. Rodriguez-Mendivil  E. García-Flores  T. D. J. Piñon-Colin  A. Quiñonez-Plaza 《Environmental Earth Sciences》2017,76(16):583

The generation of electricity has been identified as one of the main pollutant activities, and some studies have established an increment of heavy metals in soil in the areas surrounding these plants. The aim of this study was to evaluate the soil concentrations of heavy metals in the zone surrounding a thermoelectric power in Mexico. Thirty-two top soil samples (0–5 cm) were collected; additionally, four depth profiles (1 m) were investigated. Median concentrations for chromium, vanadium, nickel, mercury, and cadmium were 47, 47, 73, 0.02, and 0.01 mg/kg, respectively. Higher Cr, Ni, and V concentrations were observed in the soil depth profiles located closer to the plant in comparison with the concentrations found in the soil depth profile located further away from the plant; these results may indicate a possible accumulation of these metals. The geoaccumulation index results indicated that most of the sites were in the classifications of unpolluted and unpolluted to moderately polluted (classes 1 and 2). The statistical results showed that downwind of the plant in relation to the prevailing winds, there was a strong correlation between soil concentrations of chromium, copper, nickel, and vanadium. Based on the results of this study, it can be concluded that the use of fuel oil at the thermoelectric plant contributed to the accumulation of vanadium and nickel in the soil of the surrounding areas, as well as chromium and copper.  相似文献   

Validation of joint inversion of direct current and electromagnetic measurements   总被引：1，自引：0，他引：1  

Justyna Bała  Anna Pięta 《Acta Geophysica》2010,58(1):114-125

One of the ways to improve the information content of a set of field data is that of combining the interpretation of disparate data sets. Electromagnetic and direct current resistivity methods suffer from inherent equivalence problem. Application of joint inversion for these measurements can overcome the problem of equivalence very well. In the present work, synthetic data from vertical electrical sounding (VES) and horizontal coplanar low-frequency induction sounding (EMHD) are inverted individually and jointly over different types of 1D earth structures. Global optimization with Monte Carlo Multistart algorithm was used in the calculations. The results obtained from the inversions of synthetic data indicate that the joint inversion significantly improves the solution reducing the ambiguity of the models.  相似文献   

Genetic impact of the Prestige oil spill in wild populations of a poor dispersal marine snail from intertidal rocky shores     

Piñeira J  Quesada H  Rolán-Alvarez E  Caballero A 《Marine pollution bulletin》2008,56(2):270-281

In November 2002, the sinking of the Prestige cargo ship produced an oil spill of 60,000 tons that affected many areas along the Galician coast (in the northwest of Spain). In a number of rocky shore sites, most organisms (particularly marine mollusks) were nearly extinct at a local scale. We tested whether the local bottleneck/extinction that occurred in affected localities caused any detectable reduction of the genetic diversity in the marine snail Littorina saxatilis, an ovoviviparous rocky shore model species characterized by a low dispersal ability, high population density, and wide distribution range. We compared the level of genetic variation and population differentiation between affected (polluted) and control sites located in seven geographical areas (three sites per area, one impacted and two controls, and two replicates per site) one and a half years after the spill. The analysis included molecular marker variation (microsatellite and AFLP loci) and quantitative trait genetic variation for shell variables in embryos extracted from pregnant females. Our results indicate that the affected populations did not show a significant overall reduction in genetic diversity when compared to the controls, suggesting that the species is highly resistant to losing genetic variability as a consequence of a local short-term pollution process in spite of its low dispersal ability and direct development. However, some genetic effects were detected in the polluted populations, particularly for quantitative shell traits and AFLPs, consistent with local adaptations resulting from the fuel contamination.  相似文献   

A new solution to the lagrange's case of the three‐body problem     

E. Piña 《Celestial Mechanics and Dynamical Astronomy》1999,74(3):163-174

The motion of three particles, interacting by gravitational forces, is studied in a new coordinate system given by the principal axes of inertia, as determined by Euler angles, and using the inertia principal moments and an auxiliar angle as coordinates. The solution to the particular Lagrange case of the three‐body problem is reviewed and solved in these new coordinates. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

LiDAR-based fluvial remote sensing to assess 50–100-year human-driven channel changes at a regional level: The case of the Piedmont Region,Italy     

S. Bizzi  H. Piégay  L. Demarchi  W. Van de Bund  C.J. Weissteiner  F. Gob 《地球表面变化过程与地形》2019,44(2):471-489

Remote Sensing (RS) technology has recently offered new and promising opportunities to analyze river systems. In this paper, we present a calibration of characteristic Hydraulic Scaling Law (HSL) using a regional database of river geomorphic features. We consistently linked discharge with channel geometry features for estimated Bankfull Channel Depth (eBCD), Active Channel Width (ACW), and Low Flow water Channel Width (LFCW), which are continuously available from RS data along the river course. We then used historical information and external sources of information on channel reaches that were relatively unaffected by human pressure over periods ranging from a few decades to a century (measured in comparable geographical areas) to infer relatively Unaltered HSLs (rUHSLs). Adopting rUHSL validated with available local historical evidence on channel geometry, we were able to assess historical changes in channel geometry consistently over the entire region and within the studied temporal window. The case study was conducted for the Po basin in the Piedmont Region, north-west Italy. From our analysis, it emerges that regionally 74% of the river network has riverbed incisions exceeding 1 m, while 66% of channels have halved their historical widths with a total of 617 ha of land subtracted from the active channel. LFCW is, on average, wider in Alpine rivers compared with those located in the North Apennines. Although it is currently not possible to measure the accuracy of these estimates, the evidence generated is coherent with available historical information, characteristic hydraulic scaling laws, evidence from relatively unaltered reaches and the available literature on local fluvial systems. This methodology provides robust, novel and quantitative information regarding decadal to secular channel changes that have occurred on a regional scale. This new layer of information enriches our ability to rationally address assessments of large-scale past and future channel trajectories. © 2018 John Wiley & Sons, Ltd.  相似文献   

Wood export prediction at the watershed scale          下载免费PDF全文

Anne Senter  Gregory Pasternack  Hervé Piégay  Matthew Vaughan 《地球表面变化过程与地形》2017,42(14):2377-2392

Wood export from a watershed is a function of peak annual discharge, but one hydrologic relationship alone does not fully explain observed variability. Consideration of physical processes that influence the amount of wood available for transport is needed. However, wood recruitment, storage, mobilization, breakage, and transport rates and processes remain difficult to quantify. A theoretical wood transport equation focused on variations in discharge was the motivation for investigation into watershed‐specific wood export rates. Herein, multiplicative coefficients categorized by water year type are developed, paired with the equation, and validated to provide a new method for prediction of wood export at the watershed scale. The coefficients are defined as representing a broad suite of watershed processes that encompass spatio‐temporally variable scales. Two complementary datasets from the 1097 km² mountainous North Yuba River, California watershed were used. Wood surveys above New Bullards Bar Reservoir yielded a wood availability estimate of 250 000–300 000 m³ along the channel network. Annual wood export into the reservoir was field‐surveyed in 2010, 2012 and 2013, and estimated in seven years via remotely sensed images over the 30 year study period of water years 1985–2014. Empirical, watershed‐scale wood export rates ranged from 0.3–5.6%. Comparison of predicted quantities using the new DVWP (discharge variations modified by watershed processes) wood export equation to observed wood export quantities resulted in an aggregate error rate of ±10%. When individual wood export quantities were compared, predicted to observed varied by 0.5–3.0 times. Total wood export of 59 000–71 000 m³ was estimated over the 30 year period, yielding a rate of 1.8 to 2.2 m³/year/km². Wood export predictive capabilities at the watershed scale may help water resource and regulatory agencies plan for wood transfers to augment downstream ecosystems. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Monitoring gravel augmentation in a large regulated river and implications for process‐based restoration          下载免费PDF全文

Fanny Arnaud  Hervé Piégay  David Béal  Pierre Collery  Lise Vaudor  Anne‐Julia Rollet 《地球表面变化过程与地形》2017,42(13):2147-2166

The artificial gravel augmentation of river channels is increasingly being used to mitigate the adverse effects of river regulation and sediment starvation. A systematic framework for designing and assessing such gravel augmentations is still lacking, notably on large rivers. Monitoring is required to quantify the movement of augmented gravel, measure bedform changes, assess potential habitat enhancement, and reduce the uncertainty in sediment management. Here we present the results of an experiment conducted in the Rhine River (French and German border). In 2010, 23 000 m³ of sediments (approximately the mean annual bedload transport capacity) were supplied in a by‐passed reach downstream of the Kembs dam to test the feasibility of enhancing sediment transport and bedform changes. A 620‐m‐long and 12‐m‐wide gravel deposit was created 8 km downstream from the dam. Monitoring included topo‐bathymetric surveys, radio‐frequency particle tracking using passive integrated transponder (PIT) tags, bed grain size measurement, and airborne imagery. Six surveys performed since 2009 have been described (before and after gravel augmentation, and after Q₂ and Q₁₅ floods). The key findings are that (i) the augmented gravel was partially dispersed by the first flood event of December 2010 (Q₁); (ii) PIT tags were found up to 3200 m downstream of the gravel augmentation site after four years, but the effects of gravel augmentation could not be clearly distinguished from the effects of floods and internal remobilization on more than 3500 m downstream; (iii) linear and log‐linear relationships linking bedload transport, particle mobility, and grain size were established; and (iv) combined bathymetry and PIT tag surveys were useful for evaluating potential environmental risks and the first morpho‐ecological responses. This confirmed the complementary nature of such techniques in the monitoring of gravel augmentation in large rivers. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

Video-monitoring of wood discharge: first inter-basin comparison and recommendations to install video cameras     

Hossein Ghaffarian  Hervé Piégay  Diego Lopez  Nicolas Rivière  Bruce MacVicar  Aurelie Antonio  Emmanuel Mignot 《地球表面变化过程与地形》2020,45(10):2219-2234

Wood in rivers plays a major role both ecologically and morphologically. In recent decades, due to human activities in the river channels and along the riparian zone, wood obstruction and jamming has exacerbated flooding hazards and infrastructure damage. Therefore, it is necessary to quantify the wood flux and discharge in rivers to improve wood hazard management. Among the various methods for monitoring the wood flux in a river, the streamside videography technique is effective given its high temporal and spatial resolution. Previous work monitored the wood discharge (m³/s) using this technique in the Ain River (France) during three floods (MacVicar and Piégay, 2012), and the same method is implemented on the Isère River (France) to obtain the statistics of wood discharge for two floods. Comparison between the two sites supports the generalization of both the monitoring technique and the link between wood discharge and flood characteristics. We first show that the maximum wood discharge is observed at bankfull discharge, and we confirm the three stage model proposed by MacVicar and Piégay (2012). Additionally, transverse distributions of the number of wood pieces and corresponding wood length appear to be similar for different flood magnitudes on each site. As a technical contribution, the use of the same technique on two sites allows for recommendations on key decisions related to the location and implementation of the equipment. Both statistical and technical contributions can be used by decision makers to implement this monitoring technique, acquire the wood transport parameters, and evaluate the potential wood hazards at local scale or along a river. © 2020 John Wiley & Sons, Ltd.  相似文献