Speleoseismology: A critical perspective     

Arnfried Becker  Colin A. Davenport  Urs Eichenberger  Eric Gilli  Pierre-Yves Jeannin  Corinne Lacave 《Journal of Seismology》2006,10(3):371-388

Speleoseismology is the investigation of earthquake records in caves. Traces can be seen in broken speleothems, growth anomalies in speleothems, cave sediment deformation structures, displacements along fractures and bedding plane slip, incasion (rock fall) and co-seismic fault displacements. Where earthquake origins can be proven, these traces constitute important archives of local and even regional earthquake activity. However, other processes that can generate the same or very similar deformation features have to be excluded before cave damage can be interpreted as earthquake induced. Most sensitive and therefore most valuable for the tracing of strong earthquake shocks in caves are long and slender speleothems, such as soda straws, and deposits of well-bedded, water-saturated silty sand infillings, particularly in caves close to the earth's surface. Less easily proven is a co-seismic origin of an incasion and other forms of cave damage. The loads and creep movements of sediment and ice fillings in caves can cause severe damage to speleothems which have been frequently misinterpreted as evidence of earthquakes. For the dating of events in geological archives, it is important to demonstrate that such events happened at approximately the same time, i.e. within the error bars of the dating methods. A robust earthquake explanation for cave damage can only be achieved by the adoption of appropriate methods of direct dating of deformation events in cave archives combined with correlation of events in other geological archives outside caves, such as the deformation of lake and flood-plain deposits, locations of rock falls and active fault displacements.  相似文献   

From rifting to spreading in the eastern Gulf of Aden: a geophysical survey of a young oceanic basin from margin to margin   总被引：1，自引：0，他引：1  

Sylvie Leroy  Pascal Gente  Marc Fournier  Elia d'Acremont  Philippe Patriat  Marie-Odile Beslier  Nicolas Bellahsen  Marcia Maia  Angelina Blais  Julie Perrot  Ali Al-Kathiri  Serge Merkouriev  Jean-Marc Fleury  Pierre-Yves Ruellan  Claude Lepvrier  Philippe Huchon 《地学学报》2004,16(4):185-192

A geophysical survey in the eastern Gulf of Aden, between the Alula–Fartak (52°E) and the Socotra (55°E) transform faults, was carried out during the Encens–Sheba cruise. The conjugate margins of the Gulf are steep, narrow and asymmetric. Asymmetry of the rifting process is highlighted by the conjugate margins (horst and graben in the north and deep basin in the south). Two transfer fault zones separate the margins into three segments, whereas the present‐day Sheba Ridge is divided into two segments by a transform discontinuity. Therefore segmentation of the Sheba Ridge and that of the conjugate margins did coincide during the early stages of oceanic spreading. Extensive magma production is evidenced in the central part of the western segment. Anomaly 5d was identified in the northern and southern parts of the oceanic basin, thus confirming that seafloor spreading in this part of Gulf of Aden started at least 17.6 Ma ago.  相似文献   

High-resolution cyclostratigraphic analysis from magnetic susceptibility in a Lower Kimmeridgian (Upper Jurassic) marl–limestone succession (La Méouge,Vocontian Basin,France)     

Slah Boulila  Bruno Galbrun  Linda A. Hinnov  Pierre-Yves Collin 《Sedimentary Geology》2008,203(1-2):54-63

High-resolution magnetic susceptibility (MS) analysis was carried out on a Lower Kimmeridgian alternating marl–limestone succession of pelagic origin that crops out at La Méouge (Vocontian Basin, southeastern France). The aim of the study was to characterize the strong, dm-scale sedimentary cyclicity of the succession at a very high resolution, and to analyze the cycles for evidence of astronomical forcing. From marl to limestone, MS varies progressively and closely tracks the highest frequency cyclicity corresponding to the basic marl–limestone couplets. Long-term wavelength cycling modulates the high-frequency cyclicity (couplets), and appears to be controlled by clay content. Spectral analysis of the MS record reveals the presence of the complete suite of orbital frequencies in the precession, obliquity, and eccentricity (95–128 ka and 405 ka) bands with very high amplitude of the precession index cycles originating from dm-scale couplets. 405 ka-eccentricity cycles are very pronounced in the MS maxima of the marl members of the couplets, suggesting eccentricity-driven detrital input to the basin. 405 ka-orbital tuning of the MS maxima further sharpens all of the orbital frequencies present in the succession. These results are similar to those of previous studies at La Méouge that used carbonate content observed in field. Our results are also in accordance with cyclostratigraphic studies in Spain and Canada that report dominant precession index forcing. By contrast, in the Kimmeridge Clay (Dorset, UK), obliquity forcing dominates cyclic sedimentation, with weaker influence from the precession index. Ammonite zone duration estimates are made by counting the interpreted precession cycles, and provide an ultra-high resolution assessment of geologic time. In sum, this study demonstrates the power of the MS as a proxy in characterizing the high-resolution cyclostratigraphy of Mesozoic sections, particularly in alternating marl–limestone successions, and for high-resolution correlation and astronomical calibration of the geologic time scale.  相似文献   

A global experimental system approach of karst springs' hydrographs and chemographs   总被引：2，自引：0，他引：2  

Grasso DA  Jeannin PY 《Ground water》2002,40(6):608-617

Investigation techniques for karst flow systems are based mainly on the study of different signals leaving the system caused by natural or induced external influences. Each signal represents one of the systems outputs (e.g., hydraulic, chemical, physical, or isotopic responses) that reflect the characteristics of the entire system. In this paper, we present a method to infer information about the structure of karst systems. It is based on a simultaneous analysis of chemical and hydraulic responses. Beside the classical piston flow at the beginning of a flood pulse, we define a chemically based recession flow phase. During this phase, field data show that the concentration of total dissolved solids can be considered as an exponential function of the logarithm of flow. This relationship allows two parameters to be defined, one of which is dependent on the structure and degree of development of the karst conduit network, the other is dependent mainly on bioclimatic factors. Data collected from seven karst springs are used to support ideas introduced in the paper.  相似文献   

New chronological and geochemical constraints on the genesis and geological evolution of Ponza and Palmarola Volcanic Islands (Tyrrhenian Sea, Italy)     

Anita Cadoux  Daniele L. Pinti  Cyril Aznar  Sergio Chiesa  Pierre-Yves Gillot 《Lithos》2005,81(1-4):121-151

A new geochronological and geochemical study of the volcanic rocks of the Ponza and Palmarola Islands, Pontine Archipelago, has been carried out. This archipelago is located along the boundary between the Italian continental shelf and the opening Tyrrhenian basin. It is a key area to study volcanism related to the opening of the Tyrrhenian Sea. Ponza is the oldest felsic magmatic manifestation in the central Tyrrhenian area. Previous studies suggested that Ponza volcanic activity began before 5 Ma. Twenty-five new K–Ar ages constrain the volcanic activity (rhyolitic hyaloclastites and dykes) to the last 4.2 Ma, with two episodes of quiescence between 3.7 and 3.2 Ma and between 2.9 and 1.0 Ma. A new volcanic episode dated at 3.2–2.9 Ma has been identified on the central and southern Ponza, with emplacement of pyroclastic units. At 1.0 Ma, a trachytic episode ended the volcanic activity. The near island of Palmarola exhibits rhyolitic hyaloclastites and domes dated between 1.6 and 1.5 Ma, indicating that the island was entirely built during the Early Pleistocene in a short span of time of ca. 120 ka. Although only 6–8 km apart, the two islands display significantly different geochemical signatures. Ponza rhyolites show major and trace element compositions representative of orogenic magmas of subduction/collision zones: high-K calc-alkaline and metaluminous rhyolites (Agpaitic Index [AI] and Alumina Saturation Index [ASI] <1), high LILE/HFSE (Th/Ta=16–21) and LREE/HFSE ratios (La/Nb>3), and Nb–Ta negative anomalies. In Palmarola, the orogenic character is also present, but much less marked than in Ponza: rhyolites have a peralkaline character (AI>1), lower LILE/HFSE (Th/Ta=11–15), low LREE/HFSE ratios (La/Nb=1–2) close to those of anorogenic lavas, and the Nb–Ta negative anomalies are almost absent. Y/Nb ratios indicate different magmatic sources, one similar to island-arc or active continental margin basalts for Ponza rhyolites, and the others probably involving an OIB type component for Palmarola rhyolites and Ponza trachytes. Palmarola volcanics represent a transitional magmatism: although a preserved collisional geochemical imprint, they show geochemical features approaching those of anorogenic lavas erupted in a within-plate context. The change of magmatism evidenced in this study can be related to the tectonic evolution of the area. Indeed, Hf, Ta and Rb contents suggest that the oldest Pliocene rhyolites of Ponza would emplace in a syn- to late-collisional setting, while the younger Pleistocene rhyolites of Palmarola would be emplaced in a post-collisional setting in which the orogenic character (Th/Ta) decreases and mantle influence (Nb/Ta) increases. Geochemical modeling strongly suggests that the Palmarola rhyolites represent the waning stages of a subduction-related magmatism. The K–Ar datings allow us to estimate precisely the transition of magmatism to last less than 1.3 Ma. The transitional magmas may be the result of the upwelling of asthenospheric mantle inducing melting of a metasomatized lithospheric mantle and the mixing between these two sources. This upwelling could occur during the extension of the Tyrrhenian basin, caused by the slab retreat and steepening, or during a process of slab break-off starting in the Pliocene.  相似文献   

Determination of fabric and strain ellipsoids from measured sectional ellipses—implementation and applications     

Patrick Launeau  Pierre-Yves F. Robin   《Journal of Structural Geology》2005,27(12):20

Geologists examine fabrics to constrain models of formation or of deformation of rocks, and it is often convenient to summarise the results by a fabric ellipsoid. As fabric data are commonly collected on planar sections through the rock, estimating a fabric ellipsoid from sectional ellipses, often with arbitrary orientations, is an important task. An algebraic method to calculate such an ellipsoid, presented in an earlier paper, has been implemented with the program ellipsoid. It is used here on examples that illustrate questions and issues that arise when collecting, selecting and processing sectional fabric data, and when assessing the results. The quality of fit of the ellipsoid to the data is assessed in all cases. Examples include a case in which the average sizes of markers on individual sections can be used in the determination of the ellipsoid, and other cases in which such sizes are not useful; a case in which sectional ellipses are not obtained from closed markers; and a case in which data scatter and insufficient coverage of section orientations lead to a hyperboloid instead of an ellipsoid.  相似文献   

Selecting time windows of seismic phases and noise for engineering seismology applications: a versatile methodology and algorithm     

Vincent Perron  Aurore Laurendeau  Fabrice Hollender  Pierre-Yves Bard  Céline Gélis  Paola Traversa  Stéphane Drouet 《Bulletin of Earthquake Engineering》2018,16(6):2211-2225

Seismic signal windowing is the preliminary step for many analysis procedures in engineering seismology (standard spectral ratio, quality factor, general inversion techniques, etc.). Moreover a noise window is often necessary for the data quality control through the signal-to-noise verification. Selecting the noise window can be challenging when large heterogeneous datasets are considered, especially when they include short pre-event noise signals. This study proposes a fully automatic and configurable (i.e., with default parameters that can also be user-defined) algorithm to windowing the noise and the P, S, coda and full signal once the P-wave (T _P ) and S-wave (T _S ) first arrivals are known. An application example is given on a KiK-net dataset. A Matlab language implementation of this algorithm is proposed as an online resource.  相似文献   

Key structural parameters affecting earthquake ground motion in 2D and 3D sedimentary structures     

Peter Moczo  Jozef Kristek  Pierre-Yves Bard  Svetlana Stripajová  Fabrice Hollender  Zuzana Chovanová  Miriam Kristeková  Deborah Sicilia 《Bulletin of Earthquake Engineering》2018,16(6):2421-2450

Alluvial valleys generate strong effects on earthquake ground motion (EGM). These effects are rarely accounted for even in site-specific studies because of (a) the cost of the required geophysical surveys to constrain the site model, (b) lack of data for empirical prediction, and (c) poor knowledge of the key controlling parameters. We performed 3D, 2D and 1D simulations for six typical sedimentary valleys of various width and depth, and for a variety of modifications of these 6 “nominal models” to investigate sensitivity of EGM characteristics to impedance contrast, attenuation, velocity gradient and geometry. We calculated amplification factors, and 2D/1D and 3D/2D aggravation factors for 10 EGM characteristics, using a representative set of recorded accelerograms to account for input motion variability. The largest values of the amplification and aggravation factors are found for the Arias intensity and cumulative absolute velocity, the lowest for the root-mean-square acceleration. The aggravation factors are largest for the vertical component. For each model, at least one EGM characteristic exhibits a significant 2D/1D aggravation factor, while all EGM characteristics exhibit significant 2D/1D aggravation factor on the vertical component. For all investigated sites, there is always an area in the valley for which 1D estimates are not sufficient. 2D estimates are insufficient at several sites. The key structural parameters are the shape ratio and overall geometry of the sediment-bedrock interface, impedance contrast at the sediment-bedrock interface, and attenuation in sediments. The amplification factors may largely exceed the values that are usually considered in GMPEs between soft soils and rock sites.  相似文献