Experimental Evaluation of Construction Waste and Ground Granulated Blast Furnace Slag as Alternative Soil Stabilisers     

Umair Hasan  Amin Chegenizadeh  Mochamad Arief Budihardjo  Hamid Nikraz 《Geotechnical and Geological Engineering》2016,34(6):1707-1722

In this study, the effect of ground granulated blast furnace slag (GGBFS) and recycled construction waste (CW) on bentonite clay stabilisation were investigated. The unconfined compressive strength (UCS) of specimens was evaluated with different combinations of GGBFS and CW over various curing periods. A series of micro analysis tests consisting of scanning electron microscope, energy dispersive spectrometer and X-ray diffraction were also conducted to determine the microstructural arrangement and mineralogical effect of the stabilisation treatment. The UCS results showed an increment in strength after introduction of GGBFS and CW and the longer curing period produced more pronounced results. The optimum additive ratio was calculated as 5 % of slag and 20 % of construction waste under all curing conditions. The micro analytical results also indicated formation of structural bonds between admixtures and bentonite in stabilised specimens, as slag crystals and bentonite particles were observed to occupy the cavities and vesicles on the construction waste grains. However, the experimental data shows that the strength improvement is not significant with the addition of only construction waste.  相似文献   

Laboratory Estimation of Rock Joint Stiffness and Frictional Parameters     

Pinnaduwa H. S. W. Kulatilake  Srisharan Shreedharan  Taghi Sherizadeh  Biao Shu  Yan Xing  Pengfei He 《Geotechnical and Geological Engineering》2016,34(6):1723-1735

Numerical modeling of complex rock engineering problems involves the use of various input parameters which control usefulness of the output results. Hence, it is of utmost importance to select the right range of input physical and mechanical parameters based on laboratory or field estimation, and engineering judgment. Joint normal and shear stiffnesses are two popular input parameters to describe discontinuities in rock, which do not have specific guidelines for their estimation in literature. This study attempts to provide simple methods to estimate joint normal and shear stiffnesses in the laboratory using the uniaxial compression and small-scale direct shear tests. Samples have been prepared using rocks procured from different depths, geographical locations and formations. The study uses a mixture of relatively smooth natural joints and saw-cut joints in the various rock samples tested. The results indicate acceptable levels of uncertainty in the calculation of the stiffness parameters and provide a database of good first estimates and empirical relations which can be used for calculating values for joint stiffnesses when laboratory estimation is not possible. Joint basic friction angles have also been estimated as by-products in the small scale direct shear tests.  相似文献   

Investigation of Cycle Time Segments of Dragline Operation in Surface Coal Mine: A Statistical Approach     

Mousa Mohammadi  Piyush Rai  Umesh Singh  S. K. Singh 《Geotechnical and Geological Engineering》2016,34(6):1765-1774

Dragline is highly capital intensive equipment to procure, operate and maintain in any surface mining operation. Given this, every second of operation of this capital intensive equipment is absolutely important. Improvement of even a single second in the total cycle time has a tremendous bearing on the overall performance of this equipment. In this light, the present paper is an endeavour to critically analyze the cycle time of dragline operations in a major surface coal mine in India. Rigorous statistical analysis has been performed on individual cycle time segments, of complete dragline cycle. The segmental cycle times have been found to be statistically significant and appear to be best represented by lognormal, normal and beta distributions. Furthermore, the mean time of the statistical distribution for segmental cycle time of dragline has revealed the dependence of cycle time on cut geometry and depth. Results have been illustrated in the form of figures, graphs and tables.  相似文献   

Behavior of Shallow Strip Footing on Twin Voids     

Arash Alimardani Lavasan  Ali Talsaz  Mahmoud Ghazavi  Tom Schanz 《Geotechnical and Geological Engineering》2016,34(6):1791-1805

This paper numerically examines the bearing capacity and failure mechanism of a shallow strip foundation constructed above twin voids. The voids may refer to caves, caverns, underground aqueduct or tunnels due to water seepage, chemical reaction or deliberately excavated in soil deposit. The ability of numerical model to accurately predict the system behavior is evaluated by performing verification analyses on existing researches. Subsequently, a parametric study carried out to reveal the influence of size of footing/voids and their location (i.e. depth, spacing, eccentricity) on the bearing capacity of footing. To clarify the failure mechanism, the distribution of shear strain in the soil for different scenarios is assessed. The parametric study provided a new framework to determine the bearing capacity and the mode of failure for footings on voids. Based on the results, a criterion can be issued to avoid collapse of footing/voids regarding the shape, location and size of voids. The results can also be used to design construction of a footing on existing voids while the acquired failure mechanisms can be appointed to develop analytical solutions for this problem. Results demonstrated that a critical depth for voids and a critical distance between them exist where the influence on the ultimate bearing capacity of footing disappears.  相似文献   

Shield Tunneling in Rock–Soil Interface Composite Formations     

Yiqun Tang  Jie Xu 《Geotechnical and Geological Engineering》2016,34(6):1693-1705

With increased demand for the tunnel construction in rock–soil interface composite formations, the influence on surrounding environment especially the excavation face instability during construction and ground settlement in the long term has gained great attention. The researches about environmental disturbance by shield tunneling construction in single ground as the soil or rock conditions have been developed continuously. However, due to the complexity and uncertainty of the interaction between rock–soil interface composite formations and shield machines, works on these special conditions have not been carried out sufficiently. In this paper the theoretical, experimental and numerical researches on the excavation face stability and ground settlement are discussed while the in situ datum are used to support them. First, the typical projects in rock–soil interface composite formations are listed and the difficulties met are summarized. Second, the failure model of excavation face and support pressure from the tunneling shield in rock–soil interface composite formations are discussed. Then, a comprehensive survey of the factors of ground settlement during and after construction and some effective prediction models are made. Finally, the existing problems and directions for future research are introduced.  相似文献   

Parametric Study and Centrifuge-Test Verification for Amplification and Bending Moment of Clay–Pile System Subject to Earthquakes     

Subhadeep Banerjee  Minu Joy  Debdeep Sarkar 《Geotechnical and Geological Engineering》2016,34(6):1899-1908

This paper examines seismic effects on fixed-head, end-bearing piles installed through soft clay. The numerical analyses were conducted using ABAQUS with a hypoelastic constitutive model for the clay. The dimensionless parameters involving the major parameters such as pile modulus, soil modulus, slenderness ratio, natural frequencies of clay layer and pile–raft, superstructure mass, density of the soil and peak ground acceleration were obtained from the parametric studies. The relationships for the amplification of ground motions and the maximum bending moment in the pile were developed based on regression of the numerical data. The computed results from the proposed relationships were compared with the results reported in the past studies.  相似文献   

中国北方三流域河流—沙漠过渡带地表沉积物化学元素空间差异分析     

李小妹  严平  吴伟  钱瑶 《沉积学报》2016,34(4):615-625

通过对克里雅河、毛布拉格孔兑以及西拉木伦河三流域的河流-沙漠过渡带地表沉积物的7种常量氧化物以及15种微量元素进行因子分析,结果显示:三个流域之间或不同河段因子分析提取的公因子均可以概括为较稳定的铁锰矿物、较不稳定的长石类和方解石（白云石）类等硅酸盐矿物以及稳定的稀土元素和重矿物等类别;河流间因子分析结果表明,自西向东三个流域沿河地表沉积物的化学元素富集与迁移程度呈递增趋势,化学风化程度增强;流域内因子分析结果表明,自上游至下游,样点化学组成均愈变复杂,不同河段或不同河岸沉积物化学元素空间分布规律与其物源、地貌格局以及水分条件等因素有关;自河床至阶地,不同地貌单元地表沉积物化学元素呈相异的递变规律,这与在距离河道远近不同,物源、动力因素的分配不同有关。  相似文献   

海-塔盆地中部断陷带南屯组沉积体系配置及有利相带分析     

黄薇  吴海波  李军辉  刘赫 《沉积学报》2016,34(1):120-128

本文充分利用岩芯、测井、地震及分析化验等资料,对海-塔盆地中部断陷带4个主力凹陷的南屯组砂体类型及分布特征进行了详细研究。结果表明,南屯组主要发育扇三角洲、近岸水下扇、辫状河三角洲和湖底扇等4种典型类型砂体,并从沉积背景、发育部位、沉积特征、搬运机制以及地震反射特征等5个方面,分不同角度、不同层次详细阐述了扇三角洲、近岸水下扇、辫状河三角洲和湖底扇的识别标志;其中扇三角洲主要分布在乌尔逊凹陷和贝尔凹陷的陡坡带,近岸水下扇主要分布在南贝尔凹陷和塔南凹陷的陡坡带,而辫状河三角洲主要分布乌尔逊凹陷、贝尔凹陷和南贝尔凹陷的缓坡带。从盆地边部向盆地中心方向,沉积相由扇三角洲、近岸水下扇和辫状河三角洲沉积逐渐过渡为半深湖-深湖相沉积,局部半深湖-深湖相中发育湖底扇沉积体系,整体具有“南北分块、东西分带”的沉积格局。综合研究表明,扇三角洲前缘、近岸水下扇中扇和辫状河三角洲前缘砂体是油气富集的有利沉积相带,而洼槽边缘的湖底扇砂体为岩性油气藏勘探的重点对象。  相似文献   

A multi-dimensional assessment of urban vulnerability to climate change in Sub-Saharan Africa     

Lise Byskov Herslund  Fatemeh Jalayer  Nathalie Jean-Baptiste  Gertrud Jørgensen  Sigrun Kabisch  Wilbard Kombe  Sarah Lindley  Patrik Karlsson Nyed  Stephan Pauleit  Andreas Printz  Trond Vedeld 《Natural Hazards》2016,82(2):149-172

In this paper, we develop and apply a multi-dimensional vulnerability assessment framework for understanding the impacts of climate change-induced hazards in Sub-Saharan African cities. The research was carried out within the European/African FP7 project CLimate change and Urban Vulnerability in Africa, which investigated climate change-induced risks, assessed vulnerability and proposed policy initiatives in five African cities. Dar es Salaam (Tanzania) was used as a main case with a particular focus on urban flooding. The multi-dimensional assessment covered the physical, institutional, attitudinal and asset factors influencing urban vulnerability. Multiple methods were applied to cover the full range of vulnerabilities and to identify potential response strategies, including: model-based forecasts, spatial analyses, document studies, interviews and stakeholder workshops. We demonstrate the potential of the approach to assessing several dimensions of vulnerability and illustrate the complexity of urban vulnerability at different scales: households (e.g., lacking assets); communities (e.g., situated in low-lying areas, lacking urban services and green areas); and entire cities (e.g., facing encroachment on green and flood-prone land). Scenario modeling suggests that vulnerability will continue to increase strongly due to the expected loss of agricultural land at the urban fringes and loss of green space within the city. However, weak institutional commitment and capacity limit the potential for strategic coordination and action. To better adapt to urban flooding and thereby reduce vulnerability and build resilience, we suggest working across dimensions and scales, integrating climate change issues in city-level plans and strategies and enabling local actions to initiate a ‘learning-by-doing’ process of adaptation.  相似文献   

Climate adaptation at what scale? Multi-level governance,resilience, and coproduction in Saint Louis,Senegal     

Trond Vedeld  Adrien Coly  Ndèye Marème Ndour  Siri Hellevik 《Natural Hazards》2016,82(2):173-199

  相似文献