Landslides - This article describes the behavior of a talus-colluvium deposit up to 70-m thick located in the Serra dos Orgaos, Rio de Janeiro/RJ, Brazil. The monitoring dataset of 13 years... 相似文献
Having a better understanding of air pollutants in railway systems is crucial to ensure a clean public transport. This study measured, for the first time in Brazil, nanoparticles (NPs) and black carbon (BC) on two ground-level platforms and inside trains of the Metropolitan Area of Porto Alegre (MAPA). An intense sampling campaign during thirteen consecutive months was carried out and the chemical composition of NPs was examined by advanced microscopy techniques. The results showed that highest concentrations of the pollutants occur in colder seasons and influenced by variables such as frequency of the trains and passenger densities. Also, internal and external sources of pollution at the stations were identified. The predominance of NPs enriched with metals that increase oxidative stress like Cd, Fe, Pb, Cr, Zn, Ni, V, Hg, Sn, and Ba both on the platforms and inside trains, including Fe-minerals as hematite and magnetite, represents a critical risk to the health of passengers and employees of the system. This interdisciplinary and multi-analytical study aims to provide an improved understanding of reported adverse health effects induced by railway system aerosols. 相似文献
Empirical evidence has shown that particle breakage affects the mechanical behaviour of granular materials. The source of this mechanism takes place at the particle scale, and the main consequence on the macromechanical behaviour is increasing compressibility. Due to the inverse correlation between particle size and particle crushing strength, coarse rockfill materials are particularly vulnerable to mechanical degradation due to particle breakage. However, such coarse materials do not fit in standard laboratory devices, and the alternative of large sample testing is usually unavailable or too expensive. Alternatively, recent works have proposed multi-scale approaches using the discrete element method (DEM) to carry out numerical testing of coarse crushable materials, although few studies have focused on size effects. This article presents the application of a DEM bonded-cell model to study particle size-strength correlation on angular rock aggregates. Each particle is modelled by a cluster of perfectly rigid polyhedral cells with Mohr–Coulomb contact law. Constant cell density within particles implies that the presence of potential fragmentation planes increases with size. Therefore, particle strength decreases with size. A comprehensive sensitivity analysis was carried out through 1477 particle crushing simulations in a given particle size. Based on published experimental data on calcareous rock aggregates, part of the simulations were used for calibration, and 97 additional simulations of a coarser size fraction were performed for validation. The results show a good agreement with the empirical data in terms of size effect and data scatter through Weibull statistics.
Mathematical Geosciences - A data-driven automatic well planner procedure is implemented to develop complex well trajectories by efficiently adapting to near-well reservoir properties and geometry.... 相似文献
Achieving long-term climate mitigation goals in Japan faces several challenges, starting with the uncertain nuclear power policy after the 2011 earthquake, the uncertain availability and progress of energy technologies, as well as energy security concerns in light of a high dependency on fuel imports. The combined weight of these challenges needs to be clarified in terms of the energy system and macroeconomic impacts. We applied a general equilibrium energy economic model to assess these impacts on an 80% emission reduction target by 2050 considering several alternative scenarios for nuclear power deployment, technology availability, end use energy efficiency, and the price of fossil fuels. We found that achieving the mitigation target was feasible for all scenarios, with considerable reductions in total energy consumption (39%–50%), higher shares of low-carbon sources (43%–72% compared to 15%), and larger shares of electricity in the final energy supply (51%–58% compared to 42%). The economic impacts of limiting nuclear power by 2050 (3.5% GDP loss) were small compared to the lack of carbon capture and storage (CCS) (6.4% GDP loss). Mitigation scenarios led to an improvement in energy security indicators (trade dependency and diversity of primary energy sources) even in the absence of nuclear power. Moreover, preliminary analysis indicates that expanding the range of renewable energy resources can lower the macroeconomic impacts of the long term target considerably, and thus further in depth analysis is needed on this aspect.
Key policy insights
For Japan, an emissions reduction target of 80% by 2050 is feasible without nuclear power or CCS.
The macroeconomic impact of such a 2050 target was largest without CCS, and smallest without nuclear power.
Energy security indicators improved in mitigation scenarios compared to the baseline.
Abstract In this study, the internal circulation structures of the 14 July 1987 intense mesoscale convective system (MCS) are investigated using an improved high‐resolution version of the Canadian regional finite‐element model. It is found that although the MCS is characterized by a leading convective line followed by a trailing stratiform rainband, the associated circulation structures differ substantially from those in the classical midlatitude squall system. These include the rapid propagation and separation of the leading convection from the trailing rainband, the development of a surface‐based instead of an elevated rear‐to‐front descending flow and a shallow front‐to‐rear ascending flow associated with the stratiform precipitation, the generation of low‐ and mid‐level rather than mid‐ to upper‐level stratiform cloudiness and the development of a strong anticyclonic vorticity band at the back edge of the stratiform region. It is shown that the trailing stratiform rainband is dynamically forced by frontogenetical processes, and aided by the release of conditional symmetric instability and local orographical lifting. The intense leading and trailing circulations result from latent heat released by the convective and explicit cloud schemes, respectively. Sensitivity experiments reveal that the proper coupling of these two cloud schemes is instrumental in obtaining a realistic prediction of the above‐mentioned various mesoscale components. Vorticity budget calculations show that tilting of horizontal vorticity contributes the most to the amplification of the anticyclonic vorticity band, particularly during the squall's incipient stage. The sensitivity of the simulated squall system to other model physical parameters is also examined. 相似文献
The Azores Islands are located in the mid-Atlantic region near the triple junction where the Euro-Asiatic-African-American plates join together. Seismic activity in the area is very high, as can be observed either from historical events since the fifteenth century, from present day microseismicity, and from direct and indirect measurements of recent tectonic deformation. Volcanic activity is also present throughout the region. All available information, even data exhibiting low quality, was used to develop hazard models of São Miguel Island. Source zones were established based on both the global tectonic behaviour of the region and on the local active fault structures. Recurrence laws for São Miguel Island, for which historical information seemed quite incomplete, were obtained from the large events in the entire archipelago and from their remarkable pattern of time and space dependence, and complimented by information on long-term fault deformation (for the longer recurrence periods) and on high precision instrumental network (for the very short recurrence periods). Attenuation laws were derived from data on events felt and/or recorded in the Island. Hazard maps were obtained through a modified version of McGuire's algorithm for several geometries of source areas and results compared with the maximum observed intensity of historical events. 相似文献
In the summer of 1984, a three-dimensional, high-resolution microearthquake network was operated in the vicinity of two coal mines beneath Gentry Mountain in the eastern Wasatch Plateau, Utah. During a six-week period, approximately 3,000 seismic events were observed of which the majority were impulsive, higher frequency (>10 Hz), short duration (<2–3 sec) events probably associated with the caving of the roof from a longwall operation. In contrast, 234 of the largest located events appeared to occur predominantlybeneath the mines to a depth of 2 to 3 km consistent with previous studies. The magnitudes of these events ranged from less thanMc0 to 1.6. In addition to the unusual depths of these latter events, an anomalous aspect displayed by the events was an apparent dilatational focal mechanism suggesting a non-double-couple, possibly implosional source. Implosional events have been observed in other studies of mine seismicity; however, the generally inadequate instrumental coverage of the focal sphere has cast some doubt on the validity of such mechanisms. Previously suggested source mechanisms for such implosional events have included tensional failure through strata collapse, and a shear-implosional displacement mechanism. Shear failure must be involved in the failure process of the Gentry Mountain implosional events as evidenced by well-defined shear waves in the observed seismograms. Simultaneous monitoring in the East Mountain coal mining area to the south by the University of Utah revealed typical shear failure events mixed with implosional events. The observed double-couple, reverse focal mechanisms at East Mountain were similar to mechanisms determined in previous studies and a composite focal mechanism determined in this study for a sequence outside the mining areas. This suggested that the shear events within the mining areas are being influenced by the regional tectonic stress field. Thus in addition to the seismic events associated with caving of the roof from the longwall operation, there appear to be at least two other types of mining-induced seismic events occurring in the eastern Wasatch Plateau, both submine in origin: (1) events characterized by apparent non-double-couple possibly implosional focal mechanisms and well-defined shear waves; and (2) shear events, which are indistinguishable from tectonic earthquakes and may be considered mining triggered earthquakes. The small mining-induced stress changes that occur beyond a few hundred meters from the mine workings suggest both types of seismic events are occurring on critically stressed, pre-existing zones of weakness. Topography, overburden, method of mining, and mine configuration also appear to be significant factors influencing the occurrence of the implosional submine events. 相似文献