An upper limit to coronal X-rays from single,magnetic white dwarfs     

Rob Cavallo  Keith A. Arnaud  Virginia Trimble 《Journal of Astrophysics and Astronomy》1993,14(3-4):141-143

Pointed ROSAT PSPC exposures of 9277 and 6992 sec, directed toward the nearby, single, cool, magnetic white dwarfs GR 290 and EG 250 yielded no counts significantly above the expected background rate. The corresponding flux limits (for an assumed source temperature of l keV) are 1.0 and 1.7 × 10⁻¹⁴erg cm⁻² s⁻¹, within the 0.1–2.5 keV bandpass of the instrument (99% confidence limits). This is more than an order of magnitude below the tentative detection level (for GR 290) and limits (for four other similar stars) obtained from archival Einstein data in 1991. The corresponding limits on coronal electron density are comparable with those implied if cyclotron emission is not responsible for any of the features observed in the optical spectra of magnetic white dwarfs. X-ray data currently provide no evidence for the existence of coronae around these stars. A final long observation (25,000 sec of GD 356) is scheduled for later this year on ROSAT, along with coordinated EUVE observations.  相似文献   

Collating Historic Weather Observations for the East Asian Region:Challenges,Solutions,and Reanalyses     

Fiona WILLIAMSON  Rob ALLAN  Guoyu REN  Tsz-cheung LEE  Wing-hong LUI  Hisayuki KUBOTA  Jun MATSUMOTO  Jürg LUTERBACHER  Clive WILKINSON  Kevin WOOD 《大气科学进展》2018,35(8):899-904

正1.Introduction Historic instrumental weather observations,made on land or at sea from as early as the 17th century(e.g.,Camuffo et al.,2010),are integral to extending our understanding of the decadal and centennial variations of Earth’s climate and for comparison with paleo-proxy data.The potential of such data is shown to best effect when used in dynamical 4D global  相似文献   

Growth and linkage of a segmented normal fault zone; the Late Jurassic Murchison–Statfjord North Fault, northern North Sea     

Mike J Young  Rob L Gawthorpe  Stuart Hardy 《Journal of Structural Geology》2001,23(12):1

The structure of the 25 km long northeastern portion of the Murchison–Statfjord North Fault Zone and adjacent syn-rift stratigraphy are integrated to reconstruct the temporal and spatial evolution during c. 30.5 myr of Late Jurassic, North Sea rifting. Based on a structural analysis (D–d data) alone, approximately 14 precursor fault strands are identified. Incorporation of stratigraphic data shows that only six of these strands were important in controlling stratal architecture and distribution. Three main stages in the evolution of the fault zone are recorded in the syn-rift stratigraphy and are biostratigraphically constrained. These are: (1) following initiation of rifting, six isolated fault strands developed (each <4 km long) and controlled the stratigraphy for c. 13 myr; (2) the isolated strands linked along-strike forming two >9 km long fault segments separated by a 2 km wide relay ramp, that controlled the stratigraphy for at least the following c. 10.5 myr; and (3) the two fault segments hard-linked forming a single, continuous fault trace during the final c. 7 myr of rifting. The results of this study reveal the necessity to adopt an integrated structural and stratigraphic approach when reconstructing the evolution of normal fault zones. The results may also help to further constrain models of fault evolution.  相似文献   

Late Cenozoic magnetostratigraphy (11 – 0 Ma) of the Dongshanding and Wangjiashan sections in the Longzhong Basin,western China     

Li  Ji-Jun  Fang  Xiao-Min  Van der Voo  Rob  Zhu  Jun-Jie  Mac Niocaill  Conall  Cao  Ji-Xiu  Zhong  Wei  Chen  Huai-Lu  Wang  Jianli  Wang  Jian-Ming  Zhang  Yie-Chun 《Geologie en Mijnbouw》1997,76(1-2):121-134

A paleomagnetic study of the 510-m-thick Wangjiashan section of Late Miocene and Pliocene terrestrial sediments reveals a fairly complete reversal record with ages from 11 to 1.8 Ma. The magnetostratigraphy of the Dongshanding section, located nearby, reveals a partially overlapping reversal record with ages from 2.2 to 0 Ma, and facilitates correlation of the Wangjiashan section with the global polarity time scale. A new stratigraphic division of the Wangjiashan section replaces the name Linxia formation by five new formation names, based on lithologic variation and mammalian fossil finds. The new formations and their magnetostratigraphically determined ages are: Dongshan Formation (c. 1.75–2.6 Ma), Jishi Fm. (c. 2.6–3.6 Ma), Hewangjia Fm. (4.5–6.0 Ma), Liushu Fm. (6.0–7.6 Ma), and Dongxiang Fm. (7.6–c. 12 Ma). The Neogene stratigraphy and fossil mammals suggest that the nearby part of the Tibetan Plateau experienced a persistent denudation during the Late Miocene and Early Pliocene, but that it was uplifted more rapidly at about 3.6 Ma.  相似文献   

Landscape ecological impacts of climatic change on fluvial systems in Europe     

Rob H. G. Jongman 《地球表面变化过程与地形》1991,16(7):577-578

  相似文献   

Improving technology transfer through national systems of innovation: climate relevant innovation-system builders (CRIBs)     

David Ockwell  Rob Byrne 《Climate Policy》2016,16(7):836-854

The Technology Executive Committee (TEC) of the United Nations Framework Convention on Climate Change (UNFCCC) recently convened a workshop seeking to understand how strengthening national systems of innovation (NSIs) might help to foster the transfer of climate technologies to developing countries. This article reviews insights from the literatures on Innovation Studies and Socio-Technical Transitions to demonstrate why this focus on fostering innovation systems has potential to be more transformative as an international policy mechanism for climate technology transfer than anything the UNFCCC has considered to date. Based on insights from empirical research, the article also articulates how the existing architecture of the UNFCCC Technology Mechanism could be usefully extended by supporting the establishment of CRIBs (climate relevant innovation-system builders) in developing countries – key institutions focused on nurturing the climate-relevant innovation systems and building technological capabilities that form the bedrock of transformative, climate-compatible technological change and development.

Policy relevance

This article makes a direct contribution to current work by the TEC of the UNFCCC on enhancing enabling environments for and addressing barriers to technology development and transfer (specifically, it will contribute to Activity 4.3 of the TEC's 2014–15 rolling workplan ‘Further work on enablers and barriers, taking into account the outcomes of the workshop on NSIs’). The article articulates both the conceptual basis that justifies a focus on NSIs in relation to climate technology transfer and makes concrete recommendations as to how this can be implemented under the Convention as a Party-driven extension to the existing architecture of the Technology Mechanism.  相似文献   

Inputs of iron,manganese and aluminium to surface waters of the Northeast Atlantic Ocean and the European continental shelf     

Jeroen T.M. de Jong  Marie Boyé  Maria D. Gelado-Caballero  Klaas R. Timmermans  Marcel J.W. Veldhuis  Rob F. Nolting  Constant M.G. van den Berg  Hein J.W. de Baar 《Marine Chemistry》2007

Dissolved Fe, Mn and Al concentrations (dFe, dMn and dAl hereafter) in surface waters and the water column of the Northeast Atlantic and the European continental shelf are reported. Following an episode of enhanced Saharan dust inputs over the Northeast Atlantic Ocean prior and during the cruise in March 1998, surface concentrations were enhanced up to 4 nmol L^− 1 dFe, 3 nmol L^− 1 dMn and 40 nmol L^− 1 dAl and returned to 0.6 nmol L^− 1 dFe, 0.5 nmol L^− 1 dMn and 10 nmol L^− 1 dAl towards the end of the cruise three weeks later. A simple steady state model (MADCOW, [Measures, C.I., Brown, E.T., 1996. Estimating dust input to the Atlantic Ocean using surface water aluminium concentrations. In: Guerzoni. S. and Chester. R. (Eds.), The impact of desert dust across the Mediterranean, Kluwer Academic Publishers, The Netherlands, pp. 301–311.]) was used which relies on surface ocean dAl as a proxy for atmospheric deposition of mineral dust. We estimated dust input at 1.8 g m^− 2 yr^− 1 (range 1.0–2.9 g m^− 2 yr^− 1) and fluxes of dFe, dMn and dAl were inferred. Mixed layer steady state residence times for dissolved metals were estimated at 1.3 yr for dFe (range 0.3–2.9 yr) and 1.9 yr for dMn (range 1.0–3.8 yr). The dFe residence time may have been overestimated and it is shown that 0.2–0.4 yr is probably more realistic. Using vertical dFe versus Apparent Oxygen Utilization (AOU) relationships as well as a biogeochemical two end member mixing model, regenerative Fe:C ratios were estimated respectively to be 20 ± 6 and 22 ± 5 μmol Fe:mol C. Combining the atmospheric flux of dFe to the upper water column with the latter Fe:C ratio, a ‘new iron’ supported primary productivity of only 15% (range 7%–56%) was deduced. This would imply that 85% (range 44–93%) of primary productivity could be supported by regenerated dFe. The open ocean surface data suggest that the continental shelf is probably not a major source of dissolved metals to the surface of the adjacent open ocean. Continental shelf concentrations of dMn, dFe, and to a lesser extent dAl, were well correlated with salinity and express mixing of a fresher continental end member with Atlantic Ocean water flowing onto the shelf. This means probably that diffusive benthic fluxes did not play a major role at the time of the cruise.  相似文献   

Have applications of continuous rainfall–runoff simulation realized the vision for process‐based flood frequency analysis?          下载免费PDF全文

Rob Lamb  Duncan Faulkner  Paul Wass  David Cameron 《水文研究》2016,30(14):2463-2481

Keith Beven was amongst the first to propose and demonstrate a combination of conceptual rainfall–runoff modelling and stochastically generated rainfall data in what is known as the ‘continuous simulation’ approach for flood frequency analysis. The motivations included the potential to establish better links with physical processes and to avoid restrictive assumptions inherent in existing methods applied in design flood studies. Subsequently, attempts have been made to establish continuous simulation as a routine method for flood frequency analysis, particularly in the UK. The approach has not been adopted universally, but numerous studies have benefitted from applications of continuous simulation methods. This paper asks whether industry has yet realized the vision of the pioneering research by Beven and others. It reviews the generic methodology and illustrates applications of the original vision for a more physically realistic approach to flood frequency analysis through a set of practical case studies, highlighting why continuous simulation was useful and appropriate in each case. The case studies illustrate how continuous simulation has helped to offer users of flood frequency analysis more confidence about model results by avoiding (or exposing) bad assumptions relating to catchment heterogeneity, inappropriateness of assumptions made in (UK) industry‐standard design event flood estimation methods, and the representation of engineered or natural dynamic controls on flood flows. By implementing the vision for physically realistic analysis of flood frequency through continuous simulation, each of these examples illustrates how more relevant and improved information was provided for flood risk decision‐making than would have been possible using standard methods. They further demonstrate that integrating engineered infrastructure into flood frequency analysis and assessment of environmental change are also significant motivations for adopting the continuous simulation approach in practice. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Small data in the era of big data     

Rob Kitchin  Tracey P. Lauriault 《GeoJournal》2015,80(4):463-475

  相似文献   

Reproducibility of river water quality measurements: inter-agency comparisons for quality assurance     

Rob Davies-Colley  Juliet Milne  Mark W. Heath 《新西兰海洋与淡水研究杂志》2019,53(3):437-450

We assessed the reproducibility of river state-of-environment (SoE) water quality measurements in the Wellington Region, New Zealand (NZ). Field staff from GWRC and NIWA conducted 29 side-by-side water sampling and in-situ measurements at six river sites of diverse water quality for 12 variables measured routinely in river SoE monitoring across NZ. Field measurements of water temperature, dissolved oxygen, electrical conductivity and visual clarity agreed closely with strong numerical similarity (within 10%). Numerical similarity ranged widely for laboratory measurements, from strong for nitrate-nitrite-nitrogen to weak for turbidity, dissolved reactive phosphorus, and ammoniacal-nitrogen. Numerical agreement was very weak for laboratory pH (which is problematic) and E. coli–which is ‘tolerable’ for many applications given good correlation (R?=?0.94) over a 2000-fold concentration range. The findings of our inter-agency comparison have contributed to quality assurance recommendations in the NZ National Environmental Monitoring Standard (NEMS) for water quality.  相似文献