Dynamic properties of low velocity alluvial deposits influencing seismically-induced shear strains: the Grottaperfetta valley test-site (Rome, Italy)     

A. Caserta  S. Martino  F. Bozzano  A. Govoni  F. Marra 《Bulletin of Earthquake Engineering》2012,10(4):1133-1162

The presence of peats and high compressibility inorganic clays within alluvial fills on the left-side tributaries of the Tiber River, close to Rome’s historic center in Italy, is well documented in literature. Nevertheless, few literature data exist until now on the dynamic properties of these deposits by undisturbed bore-hole samples. The Galba test-site was set up to characterise dynamic properties of the alluvial deposits by using lab-tests as well as to derive velocity profiles by seismic noise measurements. These were performed in the Giustiniano Imperatore area located in the Grottaperfetta valley, about 2?km south of Rome’s historic centre. The alluvial deposits filled a paleovalley excavated in the bedrock during the Würm glacial (18–20 ky). The stratigraphic setting of the alluvial body was reconstructed along three geological cross-sections by means of the available logs; seven lithotecnical horizons can be distinguished within the alluvial body, some tens of meters thick, based on both log-stratigraphic data and in-site geotechnical tests. These horizons include peaty layers (T) and high compressibility inorganic clays (AGI), which characterise the alluvial deposits in the Grottaperfetta valley. They do not have direct correlation with the alluvial horizons which constitute the alluvial body of the main Tiber valley in Rome’s historical centre. These alluvial horizons which are distinguished and characterised at the Galba test-site can be regarded as typical of other lateral valleys of the Tiber River in Southern Rome. They are characterised by the presence of similar high compressibility clayey deposits as well as peaty layers up to some meters thick. Undisturbed samples were also obtained at the Galba test-site for dynamic testing via resonant column and cyclic torsional shear tests. In order to attribute dynamic properties to the alluvial body at the Grottaperfetta valley, an extrapolation process was performed based on a detailed engineering-geology model of the alluvial body which was reconstructed along three transversal geological sections of the valley using bore-hole data. Three subsoil profiles, considered representative of the geological setting along the three reconstructed transversal cross sections, were analysed by seismic noise measurements performed specifically to derive S-waves velocity profiles. The results obtained show a very low velocity (<180 m/s) for the layers T and AGI. 1D modelling of seismic shaking was performed by the code Shake91, in order to evaluate the influence of the low-velocity strata on maximum shear strains induced within the alluvial deposits under the maximum expected seismic action. The results of the numerical modelling indicate that the AGI and the T layers play a key role in: (i) concentrating the maximum shear strain along the subsoil profiles, even though the volumetric threshold is never exceeded; (ii) increasing the maximum shear strain along the subsoil profiles; (iii) causing the resonance frequency of the alluvial fill to assume an almost constant value (about 1Hz) which is quite similar to that measured in the main Tiber River valley, despite a significant change in thickness of the alluvial body along the Grottaperfetta valley.  相似文献   

The Ricker Hills Tillite provides evidence of Oligocene warm-based glaciation in Victoria Land, Antarctica     

Carlo Baroni  Francesco Fasano  Giovanna Giorgetti  Maria Cristina Salvatore  Cristiana Ribecai 《Global and Planetary Change》2008,60(3-4):457-470

The relationship between the Ricker Hills Tillite (RHT), which represents the northernmost outcrop of lithified continental glacial deposits in Victoria Land, is discussed with respect to the glacial landscape assemblage of the Ricker Hills, a nunatak at the internal border of the Transantarctic Mountains. A warm-based ice sheet deposited the tillite and induced syn- to post-depositional glacial deformation under wet conditions both of the tillite and of the bedrock. The thickness of the ice sheet on the nunatak is estimated to have been 600 m, at most. The area had been deeply eroded before deposition of the RHT as documented by the low elevation of tillite outcrops located in overdeepened depressions of the nunatak. Micropaleontological analysis evidences only the presence of Permian to Jurassic palynomorphs. X-ray diffraction and SEM–EDS analyses of clay minerals in the RHT indicate continental chemical weathering under wet conditions after the RHT deposition. As documented by clay mineral assemblage variation in CRP drillholes, the progressive cooling of the Antarctic continent allowed chemical weathering in “warm” conditions until the Late Oligocene period in southern Victoria Land, leading to a chronological constrain for RHT deposition. Conservatively estimating the sea level to have been between the tillite outcrops and the erosional trimline limiting horns in the Ricker Hills, at the time of RHT deposition, we suggest that the maximum uplift of the area would not have exceeded 900–1500 m since at least Late Oligocene.  相似文献   

Estimation of net theoretical excavation rates in concrete and sandstone     

Giovanni Spagnoli  Pierpaolo Oreste  Salvatore Grancuore 《Marine Georesources & Geotechnology》2013,31(6):739-745

Abstract

The estimation of excavation rates in specific geological and geotechnical conditions is one of the most delicate aspects for mining and geotechnical operations particularly offshore. Many models have been developed to study the effectiveness of a drilling tool in contact with the ground. In this article, the results of laboratory cutting tests on concrete specimens are shown. The comparison of the results of laboratory tests with different predictive models, helped to identify the most representative models. The models were then used to study in more detail, the effectiveness of the excavation tools through a parametric analysis. The research helped to define how to obtain rubrics, which can estimate the theoretical net cutting production of an excavation machine, when the power of its engines is known, or to evaluate, when the requested net cutting production is available, the power that the cutting machine must have. The findings were also applied to a sandstone previously investigated. The results are based on theoretical models and cannot be used on geomaterials with the same (or similar) geotechnical properties.  相似文献   

Emergence and evolution of active and ephemeral regions: Comparison between observations and models     

Francesca Zuccarello  Salvatore L. Guglielmino  Viviana Battiato  Lidia Contarino  Daniele Spadaro  Pado Romano 《Acta Geophysica》2009,57(1):15-23

This work aims to describe some aspects relevant to the emergence of magnetic structures on the solar surface. Using high resolution photospheric and chromospheric data, besides than EUV images acquired by space telescopes, the dynamics of rising flux tubes is studied. It is shown that, for both long-lived and short-lived magnetic regions, the flux tubes are initially characterized by a high rising velocity, which eventually decreases as the region develops. Other results concern the timeline of the active regions appearance in the atmospheric layers and the asymmetries in plasma downflows between preceding and following legs of the flux tubes. These results are briefly discussed in the light of most recent models.  相似文献   

Imaging DOAS for volcanological applications     

Ilia Louban  Nicole Bobrowski  Dmitri Rouwet  Salvatore Inguaggiato  Ulrich Platt 《Bulletin of Volcanology》2009,71(7):753-765

The simultaneous quantitative determination of two-dimensional bromine monoxide (BrO) and sulphur dioxide (SO₂) distributions in volcanic gas plumes is described. Measurements at the fumarolic field on the island Vulcano (autumn 2004) and in the plume of Mt. Etna volcano (spring 2005) were carried out with an Imaging DOAS instrument. The SO₂ fluxes of several fumaroles were estimated from two-dimensional distributions of SO₂. Additionally, the first two-dimensional distributions of BrO within a volcanic plume were successfully retrieved. Slant column densities of up to 2.6 × 10¹⁴ molecules per square centimetre were detected in the plume of Mt. Etna. The investigation of the BrO/SO₂ ratio, calculated from the two-dimensional distributions of SO₂ and BrO, shows an increase from the centre to the edge of the volcanic plume. These results have significance for the involvement of ozone during BrO formation processes in volcanic emissions.  相似文献   

Carbon dioxide emissions from Specchio di Venere,Pantelleria, Italy     

Mariana P. Jácome Paz  Salvatore Inguaggiato  Yuri Taran  Fabio Vita  Giovanella Pecoraino 《Bulletin of Volcanology》2016,78(4):29

  相似文献   

Seismic demand on steel reinforcing bars in reinforced concrete frame structures     

A. Braconi  F. Braga  S. Caprili  R. Gigliotti  W. Salvatore 《Bulletin of Earthquake Engineering》2014,12(6):2633-2664

  相似文献   

Aliphatic hydrocarbons in metasomatized gabbroic xenoliths from Hyblean diatremes (Sicily): Genesis in a serpentinite hydrothermal system     

Enrico Ciliberto  Carmelo Crisafulli  Fabio Carmelo Manuella  Filippo Samperi  Salvatore Scirè  Vittorio Scribano  Marco Viccaro  Ezio Viscuso 《Chemical Geology》2009,258(3-4):258-268

Many tholeiite gabbro xenoliths from the Hyblean tuff-breccia deposits (Sicily, southern Italy) present mineralogical and geochemical evidence for hydrothermal alteration at different temperatures and water/rock ratios. In some cases, the primary mineral assemblage has been entirely replaced by Na-rich alkali feldspar, chlorite/smectite interlayers, zeolites, aegirine–augite, titanite, zircon etc. Hence the chemical composition of such metasomatic rocks displays larger amounts of volatiles, alkalis, Zr, Hf, U, Th and lower Ca, Mg, Fe with respect to the original gabbro. Five hydrothermally altered gabbroic xenoliths were selected for thermal decrepitation and bulk gas analyses by quadrupole mass spectrometry. All the samples analyzed display the same Electron Impact-Direct Pyrolysis Mass spectra (EI-DPMS). These show a series of peaks differing by 14 mass units due to loss of methylene groups (–CH₂), by a fragmentation process typical of saturated aliphatic and aliphatic–aromatic hydrocarbons. In addition, Fourier Transform Infrared (FT-IR) spectra of the samples present several bands typical of vibration frequencies of aliphatic hydrocarbons. The high-molecular-weight hydrocarbons observed probably originated from Fischer–Tropsch-type (FT-t) synthesis in the high temperature section of a serpentinite-hosted hydrothermal system. This suggestion may lend support to the recent hypothesis regarding the original oceanic nature of the Hyblean lithospheric basement.  相似文献   

Nanoseismic monitoring of gravity-induced slope instabilities for the risk management of an aqueduct infrastructure in Central Apennines (Italy)     

M. Fiorucci  R. Iannucci  L. Lenti  S. Martino  A. Paciello  A. Prestininzi  S. Rivellino 《Natural Hazards》2017,86(2):345-362

A monitoring system is operative in the Peschiera Springs slope (Central Apennines, Italy) to mitigate the landslide risk related to the hosted main drainage plant of Rome aqueducts by providing alert warning. Such a strategy allows to avoid out-of-service episodes so reducing extra-costs of water distribution management. The Peschiera Springs slope is involved in a rock mass creep characterized by an average steady strain rate of 1 mm year^?1 and responsible for several landforms including sinkholes, subvertical scarps and trenches. Moreover, an average aquifer discharge of 19 m³ s^?1 causes an intense limestone dissolution concentrated in correspondence with release bands and discontinuities that dislodge the jointed rock mass. Since 2008, an accelerometric network has been operating within the slope; about 1300 microseismic local events were recorded up to now, distinguished in failures and collapses. A control index, based on frequency of occurrence and cumulative energy of the recorded microseismic events was defined to provide three levels of alert. In 2013, a temporary nanoseismic Seismic Navigation System (SNS) array was installed inside a tunnel of the drainage plant to integrate the pre-existent seismic monitoring system. This array allowed to record 37 microseismic events, which locations are in good agreement with the evolutionary geological model of the ongoing gravitational slope deformation. In 2014, a permanent nanoseismic SNS array was installed in the plant and allowed to record several sequences of underground collapses including more than 500 events. The nanoseismic monitoring system is allowing to: (1) increase the detection level of the monitoring system; (2) locate hypocentres of the events; and (3) detect precursors of the strongest events.  相似文献   

Convolutive independent component analysis for processing massive datasets: a case study at Campi Flegrei (Italy)     

P. Capuano  E. De Lauro  S. De Martino  M. Falanga  S. Petrosino 《Natural Hazards》2017,86(2):417-429

A novel procedure is proposed to analyse continuous seismic signal on hourly scales to have a prompt discrimination among the different sources. Specifically, this approach is applied to a massive dataset recorded at Campi Flegrei caldera during the year 2006 when a swarm of volcano-tectonic earthquakes occurred. The convolutive independent component analysis is adopted to obtain a clear separation among meteo-marine microseism, anthropogenic noise, hydrothermal tremor in the absence of volcano-tectonic activity, whereas in non-stationary conditions a contribution connected to the corner frequency of the earthquakes emerges. A coarse-grained variable to be monitored continuously is introduced, i.e. the frequency associated with the maximum amplitude of the power spectral density of the deconvolutive independent components. That parameter is sensitive to the variation in the frequency bands of interest (e.g. that corresponding to the corner frequencies of volcano-tectonic events) and can be used as marker of the insurgence of seismic activity.  相似文献