Process of Housing Damage Assessment: The 1995 Hanshin-Awaji Earthquake Disaster Case     

Horie  Kei  Maki  Norio  Kohiyama  Masayuki  Lu  Hengjian  Tanaka  Satoshi  Hashitera  Shin  Shigekawa  Kishie  Hayashi  Haruo 《Natural Hazards》2003,29(3):341-370

Rebuilding of victims' livelihoods was a crucial issue in the restoration process in the1995 Hanshin-Awaji Earthquake Disaster. Housing damage assessment influencedmost of the rebuilding of the livelihood in the long term, because the Victim Certificatesissued by the local governments based on the results of the Housing damage assessmentwas required to receive most of the individual assistance measures. In the process ofHousing damage assessment, many complex problems arose, leading to extensivework on the part of the disaster responders. Consequently, a considerable number ofvictims were dissatisfied with the assessment and applied for a resurvey. Due to a floodof requests for resurvey, disaster responders had to work on damage assessment, leavingrelief activities aside.In order to facilitate Housing damage assessment, this paper discusses thefollowing five points: (1) the processes and the problems of assessments performedin the Hanshin-Awaji Earthquake Disaster, (2) the changes in the nature of informationneeded by the victims, (3) the improvements over the present damage assessment, (4)the housing situation in Japan, and (5) the international situation on damage assessment.It is obvious from the results that a poor damage assessment system and the size ofthe disaster produced a very large work load. Differences in appreciation among theinvestigators also contributed to unfair assessments and led to the victims beingincreasingly dissatisfied by the survey results. Finally, a design concept for acomprehensive damage assessment system, which has been derived from theabove five points, is proposed for post-disaster management.  相似文献   

Structural modifications of CaGeO3-wollastonite under room temperature pressurization     

Takaya Nagai  Takamitsu Yamanaka 《Physics and Chemistry of Minerals》1997,25(1):1-7

 In-situ X-ray diffraction measurements of CaGeO₃-wollastonite at high pressure at room temperature have been performed using a diamond anvil cell with an X-ray source. A new structural modification of CaGeO₃-wollastonite is observed at about 6GPa and the characteristic reflections of the high pressure form are preserved on decompression to an ambient pressure. A rhodonite-like structure is proposed as a high pressure form from the crystal chemical consideration. The rhodonite-like phase is further transformed into a perovskite-form at about 15 GPa. The rhodonite-like-form of CaGeO₃ seems not to be a stable phase from the heating experiments under high pressures. The metastable transition path from the wollastonite to the perovskite polymorph through the rhodonite-like structure is kinetically favored under room temperature pressurization. No pressure-induced amorphization is observed during the transition into the perovskite-form, although the transition is accompanied by the coordination change of Ge atoms from fourfold to sixfold. Received: July 19, 1995 / Revised, accepted: August 1996  相似文献   

Attenuation of coda waves and Q _c value beneath the Chengdu telemetered seismic network     

Jian Zeng  Tian-Chang Chen  Wei-Bin Han  Jun Fan  Si-Hua Zheng  Akira Hasegawa  Shigeki Horiuchij  Satoshi Matsumoto 《地震学报(英文版)》1997,10(3):313-320

Based on the single scattering model of coda power spectrum analysis, digital waveform data of 50 events recorded by the real-time processing system of the Chengdu telemetry network are analyzed to estimate the Q _c values of earth medium beneath the Chengdu telemetry network for several specified frequencies. It is found that the Q _c shows the frequency dependency in the form of Q _c = Q ₀ f ⁿ in the range of 1.0 to 20.0Hz. Estimated Q ₀ ranges from 60.83 to 178.05, and n is found to be 0.713 to 1.159. The average value of Q ₀ and n are 117 and 0.978 respectively. This result indicates the strong frequency dependency of the attenuation of coda waves beneath the Chengdu telemetry network. Comparing with the results obtained in other regions of the world, it is found that Q ₀ ⁻¹ value and its change with frequency are similar to those in regions with strong tectonic activity. This subject is supported by the Ministry of Personnel, China for partly sponsoring.  相似文献   

Neodymium isotopic variations in Northwest Pacific waters     

Hiroshi Amakawa  Yoshiyuki Nozaki  Jing Zhang  Hisao Nagai 《Geochimica et cosmochimica acta》2004,68(4):715-727

Four vertical profiles of the concentration and isotopic composition of Nd in seawater were obtained in the western North Pacific. Two profiles from the Kuroshio Current regime showed congruently that although the Nd concentration increases gradually with depth, its isotopic composition varies significantly with depth depending upon the water mass occupying the water column. The high-salinity Kuroshio waters originating from the North Pacific Tropical Water (NPTW) carry the least radiogenic Nd (?_Nd = −7.4 to −8.7) to this region at ∼250 m from the western margin continental shelves, most likely from the East China Sea. The Nd isotopic compositions in the North Pacific Intermediate Water (NPIW) that occurs at 600 to 1000 m in the subtropical region are fairly uniform at ?_Nd = −3.7. The profile data from the ∼38° to 40°N Kuroshio/Oyashio mixed water region off Sanriku of Honshu, Japan, also suggest that the newest NPIW with ?_Nd = −3.2 is formed there by the mixing of various source waters, and the radiogenic component of Nd is derived mainly from the Oyashio waters.In the Pacific Deep Water (PDW) below ∼1000 m, the Nd isotopic composition is neither vertically nor horizontally homogeneous, suggesting that it serves as a useful tracer for sluggish deep water circulation as well. Two profiles from the Izu-Ogasawara Trench showed a minimum ?_Nd value at ∼2000 m, suggesting that there exists a horizontal advective flow in the vicinity of Honshu, Japan. There is some evidence from other chemical properties to support this observation. The waters below 4000 m including those within the trench in the subtropical region have ?_Nd values of around −5, suggesting that the deep waters are fed from the south along the western boundary, ultimately from the Antarctic Bottom Water (AABW) in the South Pacific. This extends up to ∼40°N along the Japanese Islands. In the subarctic region (>∼42°N), the waters have more radiogenic Nd with ?_Nd > −4.0 throughout the water column, presumably due to the supply of Nd by weathering in such igneous provinces as the Kuril-Kamchatska-Aleutian Island chain. The lateral inhomogeneity of the Nd isotopic composition in PDW suggests that there may be different circulation and mixing regimes in the North Pacific Basin.  相似文献   

Primary Ore Mineral Assemblage and Fluid Inclusion Study of the Batu Hijau Porphyry Cu-Au Deposit, Sumbawa, Indonesia   总被引：3，自引：0，他引：3  

Akira Imai  Satoshi Ohno 《Resource Geology》2005,55(3):239-248

Abstract. The Batu Hijau porphyry Cu‐Au deposit, Sumbawa Island, Indonesia, is associated with a tonalitic intrusive complex. The temperature‐pressure condition of mineralization at the Batu Hijau deposit is discussed on the basis of fluid inclusion microthermometry. Then, the initial Cu‐Fe sulfide mineral assemblage is discussed. Bornite and chalcopyrite are major copper ore minerals associated with quartz veinlets. The quartz veinlets have been classified into ‘A’ veinlets associated with bornite, digenite, chalcocite and chalcopyrite, ‘B’ veinlets having chalcopyrite bornite along vuggy center‐line, rare ‘C’ chalcopyrite‐quartz veinlets, and late ‘D’ veinlets consisting of massive pyrite and quartz (Clode et al., 1999). Copper and gold mineralization is associated with abundant ‘A’ quartz veinlets. Abundant fluid inclusions are found in veinlet quartz consisting mainly of gas‐rich inclusions and polyphase inclusions throughout the veinlet types. The hydrothermal activity occurred in temperature‐pressure conditions of aqueous fluid immiscibility into hypersaline brine and dilute vapor. The halite dissolution (Tm[halite]) and liquid‐vapor homogenization (Th) temperatures of the polyphase inclusions in veinlet quartz range from 270 to 472d?C and from 280 to 454d?C, respectively. The estimated salinity ranges from 36 to 47 wt% (NaCl equiv.). The apparent pressures lower than 300 bars are estimated to have been along the liquid‐vapor‐halite curve for the fluid inclusions having the Th lower than the Tm that trapped the brine saturated with halite, or at slightly higher pressure relative to liquid‐vapor‐halite curve for the fluid inclusions having the Th higher than the Tm that trapped the brine unsaturated with halite. The actual temperature and pressure during the hydrothermal activity at the Batu Hijau deposit are estimated to have been around 300d?C and 50 bars. At such temperature‐pressure conditions, the principal and initial Cu‐Fe sulfide mineral assemblages are thought to be chalcopyrite + bornite solid solution (bnss) for the chalcopyrite‐bearing assemblage, and chalcocite‐digenite solid solution and bnss for the chalcopyrite‐free assemblage.  相似文献   

Deep structure of the northeastern Japan arc and its implications for crustal deformation and shallow seismic activity   总被引：7，自引：1，他引：7  

Akira Hasegawa  Junichi Nakajima  Norihito Umino  Satoshi Miura 《Tectonophysics》2005,403(1-4):59-75

Seismic tomography studies in the northeastern Japan arc have revealed the existence of an inclined sheet-like seismic low-velocity and high-attenuation zone in the mantle wedge at depths shallower than about 150 km. This sheet-like low-velocity, high-attenuation zone is oriented sub-parallel to the subducted slab, and is considered to correspond to the upwelling flow portion of the subduction-induced convection. The low-velocity, high-attenuation zone reaches the Moho immediately beneath the volcanic front (or the Ou Backbone Range) running through the middle of the arc nearly parallel to the trench axis, which suggests that the volcanic front is formed by this hot upwelling flow. Aqueous fluids supplied by the subducted slab are probably transported upward through this upwelling flow to reach shallow levels beneath the Backbone Range where they are expelled from solidified magma and migrate further upward. The existence of aqueous fluids may weaken the surrounding crustal rocks, resulting in local contractive deformation and uplift along the Backbone Range under the compressional stress field of the volcanic arc. A strain-rate distribution map generated from GPS data reveals a notable concentration of east–west contraction along the Backbone Range, consistent with this interpretation. Shallow inland earthquakes are also concentrated in the upper crust of this locally large contraction deformation zone. Based on these observations, a simple model is proposed to explain the deformation pattern of the crust and the characteristic shallow seismic activity beneath the northeastern Japan arc.  相似文献   

Different thermal preferences for brooding and larval dispersal of two neighboring shrimps in deep‐sea hydrothermal vent fields          下载免费PDF全文

Hiromi Watanabe  Takuya Yahagi  Yukiko Nagai  MiHye Seo  Shigeaki Kojima  Jun‐ichiro Ishibashi  Hiroyuki Yamamoto  Katsunori Fujikura  Satoshi Mitarai  Takashi Toyofuku 《Marine Ecology》2016,37(6):1282-1289

Temperature is an important factor affecting the distributions and life‐history traits of marine animals. Deep‐sea hydrothermal vents are suitable environments to examine ecologic differences related to temperature, due to the steep temperature gradients around the vents. Rearing experiments under various temperature conditions (5–30 °C) at atmospheric pressure demonstrated a difference in thermal effects on egg hatching and larva in two co‐occurring, vent‐associated alvinocaridid shrimps – the peripherally distributed Alvinocaris longirostris and the centrally distributed Shinkaicaris leurokolos. The duration before hatching became shorter as temperature increased, while the maximum hatching rate occurred at higher temperatures in S. leurokolos (10–20 °C) than in A. longirostris (10 °C). Hatched larvae of both species were negatively buoyant, and larva with normal abdominal length could actively swim and stay suspended in the mid‐ or surface water layers of the culture plates under our experimental conditions. However, no larvae settled or metamorphosed into juveniles under the rearing conditions used in this study. Larvae with shortened abdomens occurred under most of the experimental conditions, although they were less frequent at 10 °C in A. longirostris and 20 °C in S. leurokolos. The maximum survival periods at these temperatures were 88 days in A. longirostris and 30 days in S. leurokolos. These characteristics may cause differences in the distributional ranges of the two species. The present results indicate that temperature is an important factor controlling life‐history traits of vent shrimps.  相似文献   

Field observations of debris-flow initiation processes on sediment deposits in a previous deep-seated landslide site     

Fumitoshi Imaizumi  Satoshi Tsuchiya  Okihiro Ohsaka 《山地科学学报》2016,13(2):213-222

Although information regarding the initiation processes of debris flows is important for the development of mitigation measures,field data regarding these processes are scarce.We conducted field observations of debris-flow initiation processes in the upper Ichinosawa catchment of the Ohya landslide,central Japan.On 19 June 2012,our videocamera monitoring systems recorded the moment of debris-flow initiation on channel deposits(nine surges) and talus slopes(eight surges).The initiation mechanisms of these surges were classified into three types by analyzing the video images: erosion by the surface flow,movement of deposits as a mass,and upward development of the fluid area.The first type was associated with the progress of surface flow from the upper stream on unsaturated channel deposits.The second type was likely caused by an increase in the pore water pressure associated with the rising in the groundwater level in channel deposits;a continuous water supply from the upper stream by the surface flow might have induced this saturation.The third type was associated with changes in the downstream topography caused by erosion.The flow velocity of most surges was less than 3 m s~(-1) and they usually stopped within 100 m from the initiation point.Surges with abundant pore fluid had a higher flow velocity(about 3- 5 m s~(-1)) and could travel for alonger duration.Our observations indicate that the surface flow plays an important role in the initiation of debris flows on channel deposits and talus slopes.  相似文献   

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating     

Yukio Isozaki  Shinji Yamamoto  Shuhei Sakata  Hideyuki Obayashi  Takafumi Hirata  Ken-ichi Obori  Toshinori Maebayashi  Satoshi Takeshima  Toshikazu Ebisuzaki  Shigenori Maruyama 《地学前缘(英文版)》2018,9(4):1073-1083

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.  相似文献   

Pore-water pressure development in a frozen saline clay under isotropic loading and undrained shearing     

Lyu  Chuangxin  Nishimura  Satoshi  Amiri  Seyed Ali Ghoreishian  Zhu  Feng  Eiksund  Gudmund Reidar  Grimstad  Gustav 《Acta Geotechnica》2021,16(12):3831-3847

Acta Geotechnica - A systematical testing program on frozen Onsøy clay under isotropic loading and undrained shearing at different temperatures...  相似文献