Superdense CO2 inclusions in Cretaceous quartz–stibnite veins hosted in low-grade Variscan basement of the Western Carpathians, Slovakia     

Márian Urban  Rainer Thomas  Vratislav Hurai  Patrik Koneèný  Martin Chovan 《Mineralium Deposita》2006,40(8):867-873

CO₂ inclusions with density up to 1,197 kg m⁻³ occur in quartz–stibnite veins hosted in the low-grade Palaeozoic basement of the Gemericum tectonic unit in the Western Carpathians. Raman microanalysis corroborated CO₂ as dominant gas species accompanied by small amounts of nitrogen (<7.3 mol%) and methane (<2.5 mol%). The superdense CO₂ phase exsolved from an aqueous bulk fluid at temperatures of 183–237°C and pressures between 1.6 and 3.5 kbar, possibly up to 4.5 kbar. Low thermal gradients (∼12–13°C km⁻¹) and the CO₂–CH₄–N₂ fluid composition rule out a genetic link with the subjacent Permian granites and indicate an external, either metamorphogenic (oxidation of siderite, dedolomitization) or lower crustal/mantle, source of the ore-forming fluids.According to microprobe U–Pb–Th dating of monazite, the stibnite-bearing veins formed during early Cretaceous thrusting of the Gemeric basement over the adjacent Veporic unit. The 15- to 18-km depth of burial estimated from the fluid inclusion trapping PT parameters indicates a 8- to 11-km-thick Upper Palaeozoic–Jurassic accretionary complex overlying the Gemeric basement and its Permo-Triassic autochthonous cover.  相似文献   

Geometry and accuracy of reflecting points in bistatic satellite altimetry     

J. Kostelecký  J. Klokočník  C.A. Wagner 《Journal of Geodesy》2005,79(8):421-430

The analysis of the time and space distribution of specular (reflecting) points in bistatic altimetry between GPS and CHAMP satellites or SAC-C (taken as examples) is extended from Wagner and Klokočník (2003 J. Geod 77: 128–138). We demonstrate a significantly higher number and density of reflecting points in bistatic altimetry in comparison with traditional monostatic altimetry. After an outline of our older accuracy assessment for the vertical position of the reflecting point, we add a new independent derivation and compare both approaches. We account for orbit errors of both the transmitters (GPS) and receiver (CHAMP) satellites, and the measurement (delay) error. We found that the accuracy of the vertical position of the reflecting point decreases only slowly with increasing off-nadir angle and that the orbit errors must be accounted for if decimeter and better accuracy is required. In this paper, we do not study errors such as state of the ocean, technical parameters of the receiving system, and atmospheric corrections.  相似文献   

A powder diffraction quantification method (ALJOR) for atmospheric particulate matter     

M. Jordán  C. Alvarez  T. Sanfeliu 《Environmental Geology》2002,42(7):810-816

The percentage calculation of crystalline phases in atmospheric particulate matter samples by means of an adiabatic approach of the matrix-flushing method with preferred preparations that avoids preferential orientations, should never be interpreted as absolute values. On the contrary, it should be seen as an indicator of the significant differences between each and every analyzed sample. Factors such as the application of constants, which are only useful for preparations of polycrystalline samples free of preferential orientation, and/or like the deficient resolution shown by the diffraction diagrams for certain phyllosilicate phases, bring a high degree of uncertainty to these percentage calculations. An alternative method of crystalline and amorphous phase quantification is presented below. Once the majority phases in the samples were identified, appropriate pure phases corresponding to each of them were selected. Then, the corresponding calibration curves were built using corundum (number 676 NIST) as a reference pattern phase. After validating the obtained calibration curves, the constants corresponding to each phase and selected spacing were calculated. The ALJOR method has been used for the quantification of five samples.  相似文献   

U–Pb evidence for a polyorogenic evolution of the HP–HT units of the NW Iberian Massif     

Javier Fernández-Suárez  Fernando Corfu  Ricardo Arenas  Alberto Marcos  José R. Martínez Catalán  Florentino García  Jacobo Abati  Francisco J. Fernández 《Contributions to Mineralogy and Petrology》2002,143(2):236-253

. A isotope dilution thermal ionisation mass spectrometry U-Pb geochronological study was carried out on the high-pressure and high-temperature units (HP-HT units) overlying the oceanic suture in the Allochthonous Complexes of the NW Iberian Variscan Belt. The rocks investigated are seven granulite- to eclogite-facies paragneisses and one leucosome within mafic high-pressure granulites in the Ordenes and Cabo Ortegal Complexes of NW Spain. U-Pb dating of zircon, monazite, titanite and rutile reveal the presence of a pervasive Early Ordovician metamorphic event at ca. 500-480 Ma and a later Early Devonian event at ca. 400-380 Ma. The U-Pb ages, in conjunction with petrological and structural data, indicate that the high-pressure event recorded by these rocks is Early Ordovician in age. Monazite ages in the paragneisses suggest that peak metamorphic conditions were reached at ca. 500-485 Ma. Subsequently, the rock ensemble underwent exhumation accompanied by partial melting and zircon growth at ca. 485-470 Ma. Melting of mafic granulites was coeval with this latter episode as indicated by zircon crystallisation age in the leucosomes dated at ca. 486 Ma. Based on these data and on the general features of magmatism and metamorphic evolution, it is proposed that this process took place at a convergent plate boundary within a peri-Gondwanan oceanic domain. Monazite, titanite and rutile data in some of the samples studied show evidence of a second metamorphic episode that took place between ca. 400 and 380 Ma (with a peak at ca. 390-385 Ma). This Early Devonian event, at variance with the previous one, was not pervasive, but, rather, was localised in areas of intense Variscan tectonothermal reworking. It is claimed that this later metamorphic event was recorded by the U-Pb system in areas where monazite and titanite growth was enhanced by fluid circulation in highly strained rocks (Variscan shear zones). According to previous structural studies and Ar-Ar dating of fabrics, this Early Devonian episode took place as the HP-HT units were deformed and thrusted upon the ophiolitic units in the early stages of the Variscan collision.  相似文献   

Al hematites prepared by homogeneous precipitation of oxinates: material characterization and determination of the Morin transition     

G. M. da Costa  E. Van San  E. De Grave  R. E. Vandenberghe  V. Barrón  L. Datas 《Physics and Chemistry of Minerals》2002,29(2):122-131

A novel method for synthesis of aluminium hematites, based upon the homogeneous precipitation of Fe and Al oxinates in various proportions, is presented. The precursor precipitates are heated in air at 700?°C. X-ray diffraction, thermal analyses, BET, FTIR, optical reflection analysis, TEM and Mössbauer spectroscopy at room temperature and 80?K of the resulting products indicate that single-phase hematites are formed with structural Al substitution of up to 10 at%. Interestingly, the particle size (>100?nm) is not substantially reduced by the Al content. Although it remains difficult to obtain a homogeneously distributed Al substitution in the final hematite, this processing line offers a unique opportunity to separate the effects of grain size and Al substitution on the Morin transition temperature (T _M) of Al hematite. From the comparison between the present hematites and a series of Al-substituted hematites with lepidocrocite as precursor, it could be shown that the effect on T _M, associated with a change of a factor 10 in grain size, is about 1/3 of the effect caused by a change of 10 in the degree of substitution. Finally, it is suggested that proper thermal treatments under different conditions of the same precursors are likely to produce spinel phases.  相似文献   

Upper Oligocene-Lower Miocene shallowing-upwardlacustrine sequences controlled by periodic and non-periodic processes(Ebro Basin, northeastern Spain)     

Arantxa Luzón  Angel González  Arsenio Muñoz  Belén Sánchez-Valverde 《Journal of Paleolimnology》2002,28(4):441-456

The lacustrine facies from two sections (Candasnos and Fraga) ofthe Oligocene-Miocene Torrente de Cinca lithostratigraphic Unit in thecentral part of the Ebro Basin (Spain) have been analysed to determine theinfluence of orbital parameters in lacustrine sedimentation. The unit ispredominantly composed of limestones and marls, and represents a shallowlacustrine freshwater system. The sedimentological features of the faciesstudied demonstrate that the lower part of the Candasnos section representsoffshore lacustrine subenvironments whereas the upper part, and the whole ofthe Fraga section, characterise marginal lacustrine areas. Series of stratalthickness variations of limestone, marl, and limestone/marl couplets fromboth sections have been analysed using spectral analysis. This shows thatinformation corresponding to periodic cycles only appears in the offshorefacies, that is to say, in the lower part of Candasnos section, and disappearsin the marginal facies where non-periodic cycles exist. Furthermore, thespectral analysis of the offshore facies highlights the existence of a peak inthe power spectrum with a period of around 7 (6.8 to 7.8) that can berecognised in the field as shallowing-upward lacustrine sequences.Magnetostratigraphic data from the Candasnos section allow us to establish atime span of 2,808 years for the limestone/marl couplet from the lower partof this section, and between 19,000 and 22,000 years for the periodic cycleidentified, thus representing the climatic precession cycle. Shallowingsequences from marginal areas do not correspond with any periodiccycle.  相似文献   

Estimates of lichen growth–rate in northern Sweden     

Wibjörn Karlén  & Jessica L. Black 《Geografiska Annaler: Series A, Physical Geography》2002,84(3&4):225-232

Two lichenometric techniques were compared in a study of lichen growth–rate in northern Sweden. The first technique, based on the maximum lichen diameter on glacier moraines, was identical to the technique used in the 1970s, whereas the other utilized the lichen diameter measured on 100 randomly selected boulders. The results indicate that it does not matter which technique is chosen, as long as the technique is used consistently on both the calibration surfaces and the surfaces to be dated. The use of data from both the 1970s and the 2000s increased the number of calibration surfaces available. The new calibration curve indicates that the age of Little Ice Age moraines was underestimated by up to about 30 years in the study conducted in the 1970s.  相似文献   

Mapping brittle fracture zones in three dimensions: high resolution traveltime seismic tomography in a granitic pluton     

D. Martí  R. Carbonell  A. Tryggvason  J. Escuder  A. Pérez-Estaún 《Geophysical Journal International》2002,149(1):95-105

  相似文献   

Modelling and imaging the Moho transition: the case of the southern Urals   总被引：2，自引：0，他引：2  

R. Carbonell  J. Gallart  A. Pérez-Estaún 《Geophysical Journal International》2002,149(1):134-148

  相似文献   

Study of weathering processes developed on old piedmont surfaces in Western Spain: new contributions to the interpretation of the “Raña” profiles     

E. Molina Ballesteros  M. Cantano Martín   《Geomorphology》2002,42(3-4)

The Hercynian basement of the Iberian Peninsula was uplifted by the Alpine orogeny during the Tertiary. It gave rise to a set of block mountains and tectonic grabens, one of which is the Ciudad Rodrigo Basin. It is located in Western Spain and forms a westward extension of the great Tertiary Duero Basin. The sediments filling this graben are of continental origin, their ages ranging from Palaeogene to Quaternary. Morphologically, the southern part of this basin forms a set of piedmont surfaces (the “Raña” surfaces) appearing above the terrace system of the present rivers. This paper examines the weathering processes developed over these old piedmont surfaces using micromorphological, XR diffraction, scanning electron microscopy (SEM) and microporosity techniques.The Raña sediments are rich in quartzite pebbles and gravel within a clayey matrix. Once deposited, these materials underwent important in situ weathering processes under somewhat hydromorphic conditions, of which hydrolysis, ferrolysis and xerolysis were the most important. All these processes gave rise to: (1) transformation of most of the clasts of shists and slates into a matrix causing the destruction of the original sedimentary structures and a relative concentration of the resistant lithologies (quartzites and quartz); (2) important changes in the clay fraction, leading to a predominance of kaolinite in the upper levels of the profiles, (3) release of elements from primary minerals, Fe being one of the most important, and (4) redistribution of matter, mainly clay and Fe oxyhydroxides, within the profiles.The coexistence of seasonal periods with pF higher than 4.2 repeated over a long time, together with poor internal and external drainage conditions, are the cause of the special features displayed by Raña deposits.  相似文献