The effects of large- and small-scale density structures on the radio emission from coronal streamers     

G. Thejappa  M. R. Kundu 《Solar physics》1994,149(1):31-49

The radio observations of the coronal streamers obtained using Clark Lake radioheliograph at 73.8, 50.0, and 38.5 MHz during a period of minimum activity in September 1986 are presented. Streamers appear to correlate with two prominent disk sources whose intensities fluctuated randomly. The variations in half-power diameter of the radio Sun are found to correspond with the variations in the white-light extents of the coronal streamers. It appears that the shape of the radio Sun is not a function of the phase of the solar cycle; instead it depends on the relative positions of the streamers in the corona. The observed peak brightness temperatures,T _B , of the streamers are found to be very low, being 6 × 10⁴ K.We compute the brightness temperature distribution along the equator by tracing the rays in the coronal plasma. The rays are deflected away by the streamers before reaching the critical density level, whereas they penetrate deeper into the coronal hole for small angles between the line of sight and the streamer axis. As a consequence, it is found that the streamers and coronal holes appear in the calculated equatorial brightness distribution as irregular brightness depressions and enhancements, respectively. The fine structures are found to disappear when the scattering due to small-scale density inhomogeneities is included in the ray-tracing calculations. The required relative level of density fluctuations, ₁ = N/N, is found to be greater than 12% to reduce the peak brightness temperature from 10⁶ K to 6 × 10⁴ K for all the three frequencies.On leave from Indian Institute of Astrophysics, Bangalore 560034, India.  相似文献   

New observations of solar noise storm radiation at decameter wavelengths     

G. Thejappa  M. R. Kundu 《Solar physics》1991,132(1):155-171

We report multifrequency observations of storm continuum and other radio bursts. Based on their positional study and their correlation with other coronal and photospheric features, we deduce that the storm source is located in the magnetic field lines lying above a single bipolar active region. Energetic electrons trapped in the magnetic structures above the spots must be responsible for the storm radiation. We show that spontaneous emission of Langmuir waves by anisotropic distributions can explain both storm continuum and bursts self-consistently. Whenever the collisional damping ( _c ) is more than the growth (- _A ), there is a steady emission responsible for the continuum, and whenever _c = - _A (which may be satisfied randomly) there is a sudden jump in T _b giving rise to bursts. The number density of energetic particles required to explain the storm continuum at 73.8, 50, and 30.9 MHz frequencies is estimated to lie in the limits n _b /n _e 10^–10–10^–9 in the context of the present observations. The brightness spectrum of the storm continuum is computed and compared with observations.On leave from Indian Institute of Astrophysics, Bangalore 560034, India.  相似文献   

On the structure of filaments from centimeter and millimeter observations     

M. Butz  E. Fürst  W. Hirth  M. R. Kundu 《Solar physics》1975,45(1):125-129

From filament observations at centimeter and millimeter wavelengths it is shown that the transition layer between the dense, cool filamentary material and the ambient hot, rarified corona is rather thin, of the order of some hundred kilometers. Hence, the difference in the sizes of filaments in the radio and optical domains is of the order of 1000 km or 2, thus not detectable by the instruments so far used for observations of filaments.NASINRC Resident Research Associate at NASA-GSFC.  相似文献   

Studies on flow characteristics of coal–oil–water slurry system     

Subrata Kumar Majumder  Kamal ChandnaDhiren Sankar De  Gautam Kundu 《International Journal of Mineral Processing》2006

Experiments were carried out to investigate the rheological properties of coal–oil–water suspension containing solids of different sizes. Two different coal samples with mean particle sizes of 120 mesh, 175 mesh and 220 mesh were used. The coal concentration was varied from 5% to 25% by weight. Sodium silicate has been used as an additive to study the behavior of the variation of average viscosity of the suspension. A generalized correlation has been developed to predict the average viscosity of suspension in terms of particle diameter of the coal, concentration of coal, viscosity of the suspending medium and the concentration of water. Experimental investigations revealed that coal–oil–water suspensions show an increase in the viscosity with decrease in coal size but with the addition of an additive, the average viscosity tends to decrease initially up to a certain optimum dosages and thereafter it increases with further addition of additives. Two empirical correlations are proposed for average viscosity of the coal–oil–water suspension, μ_sL in terms of physical properties of the solid and viscosity of the suspending medium with and without additives.  相似文献   

Calibration of a constitutive model using genetic algorithms   总被引：5，自引：0，他引：5  

Surajit Pal  G. Wije Wathugala  Sukhamay Kundu 《Computers and Geotechnics》1996,19(4):325-348

Before any constitutive model can be used in a numerical procedure, the model needs to be calibrated using laboratory test results. The traditional calibration techniques use stress and strain levels at certain states that a material undergoes during certain types of laboratory tests. Sometimes this method of calibrating a constitutive model fails to capture the overall behavior of a material, i.e. behavior at every point in stress/strain path. In this paper, we have shown how a random search technique, genetic algorithm (GA), can be used to calibrate constitutive models. The advantages of using GA are that it considers the overall behavior of a material, not the behavior at some specific states as the traditional method does, and it can work with many types of laboratory tests. The concept is applied to calibrate the hierarchical single surface (HiSS) δ_l model for geologic materials. Three cases have been studied where the difference is in the type of test data used to calibrate the model. These three different test data are: (1) simulated conventional test data, (2) simulated cyclic test data, and (3) real test data. A comparison of two different cross-over schemes, one-point and six-point, has been made.  相似文献   

Hydrography of the eastern Arabian Sea during summer monsoon 2002     

D. Shankar  S. S. C. Shenoi  R. K. Nayak  P. N. Vinayachandran  G. Nampoothiri  A. M. Almeida  G. S. Michael  M. R. Ramesh Kumar  D. Sundar  O. P. Sreejith 《Journal of Earth System Science》2005,114(5):459-474

Hydrographic observations in the eastern Arabian Sea (EAS) during summer monsoon 2002 (during the first phase of the Arabian Sea Monsoon Experiment (ARMEX)) include two approximately fortnight-long CTD time series. A barrier layer was observed occasionally during the two time series. These ephemeral barrier layers were caused byin situ rainfall, and by advection of low-salinity (high-salinity) waters at the surface (below the surface mixed layer). These barrier layers were advected away from the source region by the West India Coastal Current and had no discernible effect on the sea surface temperature. The three high-salinity water masses, the Arabian Sea High Salinity Water (ASHSW), Persian Gulf Water (PGW), and Red Sea Water (RSW), and the Arabian Sea Salinity Minimum also exhibited intermittency: they appeared and disappeared during the time series. The concentration of the ASHSW, PGW, and RSW decreased equatorward, and that of the RSW also decreased offshore. The observations suggest that the RSW is advected equatorward along the continental slope off the Indian west coast.  相似文献   

A survey instrument to isolate effectiveness of a novel risk communication intervention     

Anne M. Sanquini  Sundar M. Thapaliya  Michele M. Wood 《Natural Hazards》2016,82(1):59-72

  相似文献   

Interactive effect of cadmium and zinc on chromium uptake in spinach grown in Vertisol of Central India     

M. L. Dotaniya  S. Rajendiran  M. Vassanda Coumar  V. D. Meena  J. K. Saha  S. Kundu  A. Kumar  A. K. Patra 《International Journal of Environmental Science and Technology》2018,15(2):441-448

A pot culture experiment was conducted to study impact and interaction of multi-metals on growth, yield and metals uptake by spinach (variety All Green). Three levels of each chromium (0, 50 and 100 mg/kg), cadmium (0, 1 and 2 mg/kg) and zinc (0, 10 and 20 mg/kg) in combinations (total treatments 3 × 3 × 3 = 27) were applied in a Vertisol (5 kg). The results showed that increasing the concentration of chromium, cadmium and zinc in soil enhanced the respective metal concentrations in spinach root and shoot. When cadmium at 2 mg/kg along with chromium at 100 mg/kg soil was applied, chromium concentration and uptake were decreased in root and shoot. Meanwhile, zinc application had no significant effect on chromium uptake and concentration in spinach biomass. From the results, it was concluded that cadmium at higher dose had an antagonistic effect over chromium. On the other hand, in chromium, cadmium and zinc combinations particularly at their higher levels, a competition among each other was found. Therefore, the findings could be used as guidelines for controlling and management of heavy metals pollution in farmland.  相似文献   

Spatio-temporal variations of respirable particles at residential areas located in the vicinity of opencast coal projects,India: a case study     

Satya Prakash Sahu  Manish Yadav  Dhruti Sundar Pradhan  Neha Rani  Arka Jyoti Das 《Arabian Journal of Geosciences》2018,11(10):241

The objective of the study is to investigate spatio-temporal variations of PM₁₀, PM_2.5, and PM₁ concentrations at seven residential sites, located in the vicinity of opencast coal projects, Basundhara Garjanbahal Area (BGA), India. Meteorological parameters such as wind speed, wind direction, relative humidity, and temperature were collected simultaneously with PM concentrations. Mean concentrations of PM₁₀ in the range 215 ± 169–526 ± 412 μg m^?3, PM_2.5 in the range of 91 ± 79–297 ± 107 μg m^?3, PM₁ in the range of 68 ± 60–247 ± 84 μg m^?3 were obtained. Coarse fractions (PM_2.5–10) varied from 27 to 58% whereas fine fractions (PM_1–2.5 and PM₁) varied in the range of 51–73%. PM_2.5 concentration was 41–74% of PM₁₀ concentration, PM₁ concentration was 31–62% of PM₁₀ concentration, and PM₁ concentration was 73–83% of PM_2.5 concentration. Role of meteorology on PM concentrations was assessed using correlation analysis. Linear relationships were established among PM concentrations using least square regression analysis. With the aid of principal component analysis, two components were drawn out of eight variables, which represent more than 75% of variance. The results indicated that major sources of air pollutants (PM₁₀, PM_2.5, PM₁, CO, CO₂) at the residential sites are road dust raised by vehicular movement, spillage of coal generated during transportation, spontaneous combustion of coal, and biomass burning in village area.  相似文献   

A comparative study of soil erosion modelling by MMF,USLE and RUSLE   总被引：1，自引：0，他引：1  

Arun Mondal  Deepak Khare  Sananda Kundu 《国际地球制图》2018,33(1):89-103

The quantitative assessment of spatial soil erosion is valuable information to control the erosion. The study area in a part of Narmada river in central India is selected. The main objective is to assess and compare the results obtained from three soil erosion models using GIS platform. Variation in the rate of erosion of the three models is compared considering varying slope, soil and land use of the area. Three models selected are Morgan–Morgan–Finney (MMF), Universal Soil Loss Equation (USLE) and Revised Universal Soil Loss Equation (RUSLE). The best fit or the most reliable model for the study area is selected after validation with the observed sedimentation data. The results give –39.45%, –9.60% and 4.80% difference in the values of sedimentation by MMF, USLE and RUSLE, respectively, from the observed data. Finally, RUSLE model has been found to be most reliable for the study area.  相似文献