Gas accumulation from oil cracking in the eastern Tarim Basin: A case study of the YN2 gas field     

Wenzhi Zhao  Shuichang Zhang  Feiyu Wang  Jianping Chen  Zhongyao Xiao  Fuqing Song 《Organic Geochemistry》2005,36(12):1602-1616

Oil and gas exploration in eastern Tarim Basin, NW China has been successful in recent years, with several commercial gas accumulations being discovered in a thermally mature to over-mature region. The Yingnan2 (YN2) gas field, situated in the Yingnan structure of the Yingjisu Depression, produces gases that are relatively enriched in nitrogen and C₂₊ alkanes. The δ¹³C₁ (−38.6‰ to −36.2‰) and δ¹³C₂ values (−30.9‰ to −34.7‰) of these gases are characteristic of marine sourced gases with relatively high maturity levels. The distributions of biomarkers in the associated condensates suggest close affinities with the Cambrian–Lower Ordovician source rocks which, in the Yingjisu Sag, are currently over-mature (with 3–4%Ro). Burial and thermal maturity modeling results indicate that paleo-temperatures of the Cambrian–Lower Ordovician source rocks had increased from 90 to 210 °C during the late Caledonian orogeny (458–438 Ma), due to rapid subsidence and sediment loading. By the end of Ordovician, hydrocarbon potential in these source rocks had been largely exhausted. The homogenization temperatures of hydrocarbon fluid inclusions identified from the Jurassic reservoirs of the YN2 gas field suggest a hydrocarbon emplacement time as recent as about 10 Ma, when the maturity levels of Middle–Lower Jurassic source rocks in the study area were too low (<0.7%Ro) to form a large quantity of oil and gas. The presence of abundant diamondoid hydrocarbons in the associated condensates and the relatively heavy isotopic values of the oils indicate that the gases were derived from thermal cracking of early-formed oils. Estimation from the stable carbon isotope ratios of gaseous alkanes suggests that the gases may have been formed at temperatures well above 190 °C. Thus, the oil and gas accumulation history in the study area can be reconstructed as follows: (1) during the late Caledonian orogeny, the Cambrian–Lower Ordovician marine source rocks had gone through the peak oil, wet gas and dry gas generation stages, with the generated oil and gas migrating upwards along faults and fractures to form early oil and gas accumulations in the Middle–Upper Ordovician and Silurian sandstone reservoirs; (2) since the late Yanshanian orogeny, the early oil accumulations have been buried deeper and oil has undergone thermal cracking to form gas; (3) during the late Himalayan orogeny, the seals for the deep reservoirs were breached; and the gas and condensates migrated upward and eventually accumulating in the relatively shallow Jurassic reservoirs.  相似文献   

Correlation between magnetic susceptibility and heavy metals in urban topsoil: a case study from the city of Xuzhou, China   总被引：7，自引：0，他引：7  

Xue Song WANG  Yong QIN 《Environmental Geology》2005,49(1):10-18

Anthropogenic influence, mainly due to urban and industrial activities and traffic exhaust, may affect urban topsoil via atmospheric contamination and solid waste. Magnetic susceptibility measurements were conducted on 21 urban topsoil samples from the city of Xuzhou, China. High intensities of magnetic susceptibility were detected in the majority of the samples. SEM analysis shows that magnetic minerals are in the form of spherules and mainly due to anthropogenic inputs. The heavy metals Pb, Cu, Zn, Se, Sc, Mo, Fe, and Bi show strong correlations with magnetic susceptibility, and Ag, Ba, Cd, Ni, Cr, Sb, and Sn, on the other hand, show a weak correlation with magnetic susceptibility. Whereas, of these metals studied, only Hg has no significant correlation with the susceptibility. The Tomlinson pollution load index (PLI) also shows significant correlation with the susceptibility (χ). The present study shows that magnetic susceptibility is a fast, inexpensive, and non-destructive method for the detection and mapping of contaminated soils.  相似文献   

Polygonal grain‐based distinct element modeling for mechanical behavior of brittle rock          下载免费PDF全文

J.‐W. Park  C. Park  J.‐W. Song  E.‐S. Park  J.‐J. Song 《国际地质力学数值与分析法杂志》2017,41(6):880-898

The microstructure of rock was numerically reproduced by a polygonal grain‐based model, and its mechanical behavior was examined by performing the uniaxial compression test and Brazilian tests via the Universal Distinct Element Code. The numerical results of the model demonstrated good agreement with the experimental results obtained with rock specimens in terms of the stress–strain behavior, strength characteristics, and brittle fracture phenomenon. An encouraging result is that the grain‐based model‐Universal Distinct Element Code model can reproduce a low ratio of tensile to compressive strength of 1/20 to 1/10 without the need for an additional process. This finding is ascribed to the fact that the geometrical features of polygons can effectively capture the effects of angularity, finite rotation, and interlocking of grains that exist in reality. A numerical methodology to monitor the evolution of micro‐cracks was developed, which enabled us to examine the progressive process of the failure and distinguish the contribution of tensile cracking to the process from that of shear cracking. From the observations of the micro‐cracking process in reference to the stress–strain relation, crack initiation stress, and crack damage stress, it can be concluded that the failure process of the model closely resembles the microscopic observations of rock. We also carried out a parametric study to examine the relationships between the microscopic properties and the macroscopic behavior of the model. Depending on the micro‐properties, the model exhibited a variety of responses to the external load in terms of the strength and deformation characteristics, the evolution of micro‐cracks, and the post‐peak behavior. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

Open tensile fractures at depth in anticlines: A case study in the Tarim basin,NW China          下载免费PDF全文

Tao Nian  Guiwen Wang  Hongyu Song 《地学学报》2017,29(3):183-190

Understanding fracture openness in the Earth's crust is crucial for understanding fracture properties and their impact on fluid flow and potentially also in reservoir modelling. Here, we present cases showing the presence of open tensile fractures at depth in anticlines by integrating borehole imaging logs, core observations, casting sections, physical modelling, in‐situ stress analysis and production data in petroleum wells, and analysing the time of fracturing by fluid inclusion analysis. The data come from the Cretaceous Bashejiqike Formation in the Kuqa Depression, Tarim basin; its current depth varies between 6,000 and 8,100 m. The results show that tensile fractures are the main fracture type in the studied formation and that their hydraulic conductivity is poorly affected by the current maximum horizontal stress direction. Furthermore, we find that fracture development is uninterrupted during continued anticline folding, although there is a dominant time of fracturing.  相似文献   

Exploring commercial sector building energy consumption in China     

Ming Zhang  Yan Song  Lixia Yao 《Natural Hazards》2015,75(3):2673-2682

  相似文献   

Variability in the vertical hyporheic water exchange affected by hydraulic conductivity and river morphology at a natural confluent meander bend          下载免费PDF全文

Jinxi Song  Guotao Zhang  Weize Wang  Qi Liu  Weiwei Jiang  Weiqiang Guo  Bin Tang  Haifeng Bai  Xinyi Dou 《水文研究》2017,31(19):3407-3420

River confluences and their associated tributaries are key morphodynamic nodes that play important roles in controlling hydraulic geometry and hyporheic water exchange in fluvial networks. However, the existing knowledge regarding hyporheic water exchange associated with river confluence morphology is relatively scarce. On January 14 and 15, 2016, the general hydraulic and morphological characteristics of the confluent meander bend (CMB) between the Juehe River and the Haohe River in the southern region of Xi'an City, Shaanxi Province, China, were investigated. The patterns and magnitudes of vertical hyporheic water exchange (VHWE) were estimated based on a one‐dimensional heat steady‐state model, whereas the sediment vertical hydraulic conductivity (K_v) was calculated via in situ permeameter tests. The results demonstrated that 6 hydrodynamic zones and their extensions were observed at the CMB during the test period. These zones were likely controlled by the obtuse junction angle and low momentum flux ratio, influencing the sediment grain size distribution of the CMB. The VHWE patterns at the test site during the test period mostly showed upwelling flow dominated by regional groundwater discharging into the river. The occurrence of longitudinal downwelling and upwelling patterns along the meander bend at the CMB was likely subjected to the comprehensive influences of the local sinuosity of the meander bend and regional groundwater discharge and finally formed regional and local flow paths. Additionally, in dominated upwelling areas, the change in VHWE magnitudes was nearly consistent with that in K_v values, and higher values of both variables generally occurred in erosional zones near the thalweg paths of the CMB, which were mostly made up of sand and gravel. This was potentially caused by the erosional and depositional processes subjected to confluence morphology. Furthermore, lower K_v values observed in downwelling areas at the CMB were attributed to sediment clogging caused by local downwelling flow. The confluence morphology and sediment K_v are thus likely the driving factors that cause local variations in the VHWE of fluvial systems.  相似文献   

Using stable isotopes to understand seasonal and interannual dynamics in moisture sources and atmospheric circulation in precipitation          下载免费PDF全文

Yu Tang  Xianfang Song  Yinghua Zhang  Dongmei Han  Likun Ai  Tianbao Zhao  Yajun Wang 《水文研究》2017,31(26):4682-4692

Stable isotopes in precipitation are useful tracers to strengthen understanding of climate change and hydrological processes. In this study, the moisture sources of 190 precipitation events in Beijing were analysed using the Hybrid Single‐particle Lagrangian Integrated Trajectory model, based on which we studied the relation between variations in precipitation δ¹⁸O and dynamics in moisture sources and atmospheric circulation in seasonal and interannual timescales. Categorization of 7 groups of moisture sources was performed, among which oceanic moisture sources presented lower δ¹⁸O in precipitation than continental moisture sources. The results show that seasonal variations of precipitation δ¹⁸O were caused by changes of moisture sources. In summer, moisture from proximal oceans dominated vapour transport to Beijing due to increasing monsoon strength and resulted in a relatively small variation of precipitation δ¹⁸O. At the interannual timescale, the variations of δ¹⁸O in summer precipitation were related to dynamics in oceanic moistures, showing depleted values when the contribution of oceanic moistures, especially the proportion of long‐distance oceanic moisture, was high. Further analysis indicated that changes of oceanic moisture sources were controlled by the strength of summer monsoons. These findings address the complexity of moisture sources in midlatitude monsoon areas and suggest that isotopic signals in precipitation have the potential to deduce changes in moisture sources and atmospheric circulation and can therefore serve for palaeoclimate reconstruction.  相似文献   

Carboniferous eclogite and garnet–omphacite granulite from northeastern Hainan Island,South China: Implications for the evolution of the eastern Palaeo‐Tethys     

Xiaochun Liu  Yi Chen  Wei‐ Wang  Mengmeng Xia  Juan Hu  Yibing Li  Daogong Hu  Biao Song 《Journal of Metamorphic Geology》2021,39(1):101-132

High‐P (HP) eclogite and associated garnet–omphacite granulite have recently been discovered in the Mulantou area, northeastern Hainan Island, South China. These rocks consist mainly of garnet, omphacite, hornblende, quartz and rutile/ilmenite, with or without zoisite and plagioclase. Textural relationships, mineral compositions and thermobarometric calculations demonstrate that the eclogite and garnet–omphacite granulite share the same three‐stage metamorphic evolution, with prograde, peak and retrograde P?T conditions of 620–680°C and 8.7–11.1 kbar, 820–860°C and 17.0–18.2 kbar, and 700–730°C and 7.1–8.5 kbar respectively. Sensitive high‐resolution ion microprobe U–Pb zircon dating, coupled with the identification of mineral inclusions in zircon, reveals the formation of mafic protoliths before 355 Ma, prograde metamorphism at c. 340–330 Ma, peak to retrograde metamorphism at c. 310–300 Ma, and subsequent pegmatite intrusion at 295 Ma. Trace element geochemistry shows that most of the rocks have a MORB affinity, with initial ε_Nd values of +2.4 to +6.7. As with similar transitional eclogite–HP granulite facies rocks in the thickened root in the European Variscan orogen, the occurrence of relatively high P?T metamorphic rocks of oceanic origin in northeastern Hainan Island suggests Carboniferous oceanic subduction leading to collision of the Hainan continental block, or at least part of it, with the South China Block in the eastern Palaeo‐Tethyan tectonic domain.  相似文献   

Generation of continuous surface soil moisture dataset using combined optical and thermal infrared images          下载免费PDF全文

Pei Leng  Xiaoning Song  Si‐Bo Duan  Zhao‐Liang Li 《水文研究》2017,31(6):1398-1407

Surface soil moisture (SSM) is a critical variable for understanding water and energy flux between the atmosphere and the Earth's surface. An easy to apply algorithm for deriving SSM time series that primarily uses temporal parameters derived from simulated and in situ datasets has recently been reported. This algorithm must be assessed for different biophysical and atmospheric conditions by using actual geostationary satellite images. In this study, two currently available coarse‐scale SSM datasets (microwave and reanalysis product) and aggregated in situ SSM measurements were implemented to calibrate the time‐invariable coefficients of the SSM retrieval algorithm for conditions in which conventional observations are rare. These coefficients were subsequently used to obtain SSM time series directly from Meteosat Second Generation (MSG) images over the study area of a well‐organized soil moisture network named REMEDHUS in Spain. The results show a high degree of consistency between the estimated and actual SSM time series values when using the three SSM dataset‐calibrated time‐invariable coefficients to retrieve SSM, with coefficients of determination (R²) varying from 0.304 to 0.534 and root mean square errors ranging from 0.020 m³/m³ to 0.029 m³/m³. Further evaluation with different land use types results in acceptable debiased root mean square errors between 0.021 m³/m³ and 0.048 m³/m³ when comparing the estimated MSG pixel‐scale SSM with in situ measurements. These results indicate that the investigated method is practical for deriving time‐invariable coefficients when using publicly accessed coarse‐scale SSM datasets, which is beneficial for generating continuous SSM dataset at the MSG pixel scale.  相似文献   

城市点云的区域生长三角网构建方法     

李晶晶  范大昭  耿弘毅  纪松 《测绘科学技术学报》2016,(1):65-70

成熟的倾斜摄影测量及密集匹配技术可获取密集的城市点云,对点云进行三角网构建是真三维建模的关键技术之一。提出了基于区域生长的三角网构建方法,使用双约束条件提高点云的搜索效率,基于点边表数据结构进行网格生长,利用夹角约束和三角形孔洞修补优化网格。实验证明,该方法获取的三角网能够准确地表达楼体、桥状建筑等在内的城市实体,网格优化后的孔洞比例约为1‰并且该方法具有一定的抗噪能力。  相似文献