Benthic foraminiferal response to changes in mining pattern: a case study from the Zuari estuary,Goa, India     

Syed Mohammad Saalim  R. Saraswat  T. Suokhrie  S. R. Bhadra  S. R. Kurtarkar  R. Nigam 《Environmental Earth Sciences》2017,76(20):706

Being sensitive to environmental changes, foraminifera have been extensively used to monitor pollution level in the marine environment, including the effect of mining in coastal areas. In the Goa state of India, the rejects from opencast mining on land largely find their way to the estuaries, as washout during monsoon. Additionally, the Mormugao Port at the mouth of the Zuari estuary is the hub of activities due to the transport of ore from hinterland areas by barges and its subsequent loading for export. On the directive of the Supreme Court of India, all the mining-related activities abruptly stopped throughout India, including that in Goa in 2012, and got reinstated in 2015. Therefore, it provided a fit case to test the effectiveness of benthic foraminifera as an indicator of environmental impact due to mining activities. A total of ten surface sediment samples from five locations in Zuari estuary were collected from a depth range of 4.5–8.5 m in the years of 2013 and 2016 and were analyzed for both the living (stained) and dead benthic foraminifera. The year 2013 represents a time interval immediately after the closure of extensive mining activity, and the sampling during 2016 represents minimal mining. The living benthic foraminiferal abundance was higher (19–54/g sediment) during 2013 and decreased substantially during 2016 (3–22/g sediment), suggesting an adverse effect of activities associated with mine closure on benthic foraminifera. Additionally, the relative abundance of Ammonia was also significantly low during the year 2016. The temporal variation in dead foraminifera was, however, different than that of the living foraminifera. The differential response was attributed to the terrigenous dilution as a result of change in sedimentation rate. Therefore, we conclude that living foraminifera correctly incorporate the changes in mining pattern and may be used as an effective tool to monitor the impact of mining. We further suggest that the potential counter effect of terrigenous dilution on total and living benthic foraminiferal population should be considered while interpreting temporal variations in foraminiferal abundance in marginal marine settings.  相似文献   

Offshore sand sources for beach replenishment: Potential borrows on the continental shelf of the Eastern Gulf of Mexico     

Charles W. Finkl Jr.  Syed M. Khalil  Jeffrey L. Andrews 《Marine Georesources & Geotechnology》2013,31(2):155-173

Erosion of sandy beaches is a worldwide problem that elicits innovative geoengineer‐ing techniques to reduce adverse impacts of shoreline retreat. Beach replenishment has emerged as the “soft”; shore‐stabilization technique of choice for mitigating beach erosion. This method of shore protection involves the addition of sand to the littoral sediment budget for sacrificial purposes. Because inland sand sources are often uneconomical or impractical to use, and known nearshore sources are limited, finding adequate quantities of suitable sand on the inner continental shelf is often vital to beach replenishment projects. The technical studies of survey and materials analysis that identify and delineate usable sand sources are sometimes almost as expensive as small‐project dredging, pumping, and placing the sand on the beach as fill. Inadequate quantity or substandard quality of shelf sand, as well as often‐prohibitive overhead expenses, thus compel shoreline managers to seek suitable sand sources offshore.

In the study area off the central‐west coast of Florida, offshore potential borrow areas (PBAs) were identified on the basis of studies conducted in reconnoitory and detailed phases. Sophisticated state‐of‐the‐art equipment used in this investigation provided more detailed subbottom mapping information than is normally obtained with conventional seismic equipment. An example of sand exploration studies was incorporated in a 215‐km² survey of offshore areas by conducting bathymetric surveys and subbottom seismic profiling, collecting jet probes, grab samples, and vibrocores, and analyzing sediment grading in subsamples from vibrocores. These combined analyses indicated that at least 8.8 ×10⁶ m³ of sand is available in potential borrow areas from 7.0 to 12 km offshore in water depths of 8.0 to 11.5 m. In the PBAs, mean grain size of sand falls into the range 0.13–0.53 mm, sorting averages 0.65–1.31ø, and the overall silt content varies from 3.9–8.5%. High silt contents (13–19%) mapped in some areas make these sedimentary deposits unsuitable as fill for artificial beach renourishment.  相似文献   

Coulomb stress evolution in Northeastern Caribbean over the past 250 years due to coseismic, postseismic and interseismic deformation   总被引：5，自引：0，他引：5  

Syed Tabrez Ali  rew M. Freed  Eric Calais  David M. Manaker  William R. McCann 《Geophysical Journal International》2008,174(3):904-918

  相似文献   

Earthquake hazards and community resilience in Baluchistan   总被引：5，自引：3，他引：2  

Syed Ainuddin  Jayant Kumar Routray 《Natural Hazards》2012,63(2):909-937

Resilience is widely used from a variety of research perspectives; however, community resilience in particular is applied to a number of natural hazards and disasters-related studies, programs, and activities. It is also acknowledged that its measurement is cumbersome but not impossible. The prime objective of this paper is to measure the community resilience of an earthquake-prone area in Baluchistan. The article presents the concept of resilience, its approaches, selection of indicators, formulation of subjective assessment method for weighting the indicators, and finally, developing the community resilience index. For the community resilience measurement, a survey was conducted among 200 households in two earthquake risk zones of Quetta city, using simple random sampling method. The overall composite community resilience index revealed that the resilience is low in both the zones??A and B. However, it is revealed that there is a significant difference between the zones when compared against the components and indicators. Community resilience components such as economic, institutional, and physical have received higher index values in Zone B as compared to Zone A. Based on the findings, it is recommended to improve the socioeconomic, institutional, and structural (housing) conditions of the community by raising the community awareness and preparedness, implementing building codes, and providing income-generating activities in order to enhance the community resilience to cope up with earthquake hazards in the future.  相似文献   

Occurrence of scheelite-powellite in the rocks of Mahakoshal Group, Wyndhamganj area, Sonbhadra district, Uttar Pradesh     

M. A. Khan  Asfar Hakim  S. Syed Ameer Rasool  V. P. Sinha 《Journal of the Geological Society of India》2012,80(4):579-583

Scheelite and Powellite occur as dissemination and fractures filling in the hornfels and tourmaline-garnet granite in the Palaeoproterozoic rocks of Mahakoshal Group, at about 2.5 km north of Wyndhamganj, Sonbhadra district, Uttar Pradesh. This new find opens new vistas for the search of tungsten mineralization along the contact zones of Mahakoshal Group and the younger granite.  相似文献   

Factor and cluster analysis of water quality data of the groundwater wells of Kushtia, Bangladesh: Implication for arsenic enrichment and mobilization     

Md. Golzar Hossain  A. H. M. Selim Reza  Mst. Lutfun-Nessa  Syed Samsuddin Ahmed 《Journal of the Geological Society of India》2013,81(3):377-384

The study area is located in the southwestern part of Bangladesh. Twenty-six groundwater samples were collected from both shallow and deep tube wells ranging in depth from 20 to 60 m. Multivariate statistical analyses including factor analysis, cluster analysis and multidimensional scaling were applied to the hydrogeochemical data. The results show that a few factors adequately represent the traits that define water chemistry. The first factor of Fe and HCO₃ is strongly influenced by bacterial Fe (III) reduction which would raise both Fe and HCO₃ concentrations in water. Na, Cl, Ca, Mg and PO₄ are grouped under the second factor representing the salinity sources of waters. The third factor, represented by As, Mn, SO₄ and K is related to As mobilization processes. Cluster analysis has been applied for the interpretation of the groundwater quality data. Initially Piper methods have been employed to obtain a first idea on the water types in the study area. Hierarchical cluster analysis was carried out for further classification of water types in the study area. Twelve components, namely, pH, Fe, Mn, As, Ca, Mg, Na, K, HCO₃, Cl, SO₄ and NO₃ have been used for this purpose. With hierarchical clustering analysis the water samples have been classified into 3 clusters. They are very high, high and moderately As-enriched groundwater as well as groundwater with elevated SO₄.  相似文献   

Simple and multiple regression models for relationship between electrical resistivity and various soil properties for soil characterization     

Fahad Irfan Siddiqui  Syed Baharom Azahar Bin Syed Osman 《Environmental Earth Sciences》2013,70(1):259-267

Precise determination of engineering properties of soil is essential for proper design and successful construction of any structure. The conventional methods for determination of engineering properties are invasive, costly and time-consuming. Electrical resistivity survey is an attractive tool for delineate subsurface properties without soil disturbance. Reliable correlations between electrical resistivity and other soil properties will enable us to characterize the subsurface soil without borehole sampling. This paper presents the correlations of electrical resistivity with various properties of soil. Soil investigations, field electrical resistivity survey and laboratory electrical resistivity measurements were conducted. The results from electrical resistivity tests (field and laboratory) and laboratory tests were analyzed together to understand the interrelation between electrical resistivity and various soil properties. The test results were evaluated using simple and multiple regression analysis. From the data analysis, significant quantitative and qualitative correlations have been obtained between resistivity and moisture content, friction angle and plasticity index. Weaker correlations have been observed for cohesion, unit weight of soil and effective size (D ₁₀).  相似文献   

Assessment of Trace Metal Contamination of Drinking Water in the Pearl Valley,Azad Jammu and Kashmir     

Saboor Javaid  Syed Ghulam Sarwar Shah  Abdul Jabbar Chaudhary  Mohammad Haleem Khan 《洁净——土壤、空气、水》2008,36(2):216-221

The aim of this study was to assess trace metal contamination of drinking water in the Pearl Valley, Azad Jammu and Kashmir (Pakistan). The objectives were to determine physical properties and the dissolved concentration of five trace metals, i. e., lead, copper, nickel, zinc, and manganese, in drinking water samples collected from various sites of municipal water supply, natural water springs and wells in the valley. Concentrations of the metals in the water samples were determined by flame atomic absorption spectrometry. Results showed physical parameters, i. e., appearance, taste and odor within acceptable limits and pH was between 5.5 and 7.0. The observed concentrations of the metals varied between sources of water samples and between sampling sites. Maximum dissolved concentration observed was 4.7 mg/L for Pb and Mn, 4.6 mg/L for Zn, 2.9 mg/L for Ni and 2.8 mg/L for Cu. The observed concentrations of the metals were compared with the World Health Organization's guideline values for drinking water. Overall, the quality of water samples taken from the water springs at Mutyal Mara and Bonjosa was good; however, the water quality was unsuitable for drinking in Kiraki, Kharick, and Pothi Bala localities particularly. Finally, the authors discuss possible causes for increased concentrations of the trace metals in drinking water in the study area.  相似文献   

Competitive Sorption of Antimony with Zinc,Nickel, and Aluminum in a Seaweed Based Fixed‐bed Sorption Column     

Adil Bakir  Peter McLoughlin  Syed A. M. Tofail  Eddy Fitzgerald 《洁净——土壤、空气、水》2009,37(9):712-719

The removal of heavy metals such as Ni(II), Zn(II), Al(III), and Sb(III) from aqueous metal solutions was investigated using novel, cost effective, seaweed derived sorbents. Studies with a laboratory scale fixed‐bed sorption column, using a seaweed waste material (referred to as waste Ascophyllum product (WAP)) from the processing of Ascophyllum nodosum as biosorbent, demonstrated high removal efficiencies (RE) for a variety of heavy metals including Ni(II), Zn(II) and Al(III), with 90, 90 and 74% RE achieved from initial 10 mg/L metal solutions, respectively. The presence of Sb(III) in multi component metal solutions suppressed the removal of Ni(II), Zn(II) and Al(III), reducing the RE to 28, 17 and 24%, respectively. The use of Polysiphonia lanosa as a biosorbent showed a 67% RE for Sb(III), both alone and in combination with other metals. Potentiometric and conductometric titrations, X‐ray photoelectron and mid‐infrared spectroscopic analysis demonstrated that carboxyl, alcohol, sulfonate and ether groups were heavily involved in Sb(III) binding by P. lanosa. Only carboxyl and sulfonate groups were involved in Sb(III) binding by WAP. Furthermore, a greater amount of weak acidic groups (mainly carboxylic functions) were involved in Sb(III) binding by P. lanosa, compared to WAP which involved a greater concentration of strong acidic groups (mainly sulfonates).  相似文献   

A comprehensive study on the surface chemistry of particulate matter collected from Jeddah,Saudi Arabia     

Asim Jilani  Syed Zajif Hussain  Mohd Hafiz Dzarfan Othman  Usama Zulfiqar  Muhammad Bilal Shakoor  Imran Ullah Khan  Javed Iqbal  Attieh A. Al-Ghamdi  Ahmed Alshahrie 《Journal of Atmospheric Chemistry》2018,75(3):271-283

In this work, the X-ray Photoelectron Spectroscopy (XPS) technique is utilized to analyze the surface chemical composition of particulate matter (PM) which was collected from various locations at Jeddah, Saudi Arabia. The main elements found on the surface of PM are carbon (C), oxygen (O) and silicon (Si) with combined percentage of 89.4–94.9 while traces of nitrogen (N), calcium (Ca), aluminum (Al), sodium (Na), chlorine (Cl), manganese (Mg), and sulfur (S) were also present. The analyzed XPS chemical state of C, O and Si was further used to determine their bonding with other elements occurring over the surface of PM. Carbon was found in the form of carbides (18.86%), fluorides (2.39%) and carbonates (78.75%); oxygen was observed as oxides (21.05%) and hydroxides (73.42%) of other metals; and silicon was detected as silicones (12.16%), nitrides (82.53%) and silicates (5.25%). The particle size of a PM is also of great concern for health issues, and thus has been investigated by the Field Emission Scanning Electron Microscope (FESEM). The Energy Dispersive X-ray Spectroscopy (EDS) was employed for cross verification of detected elements by XPS.  相似文献