Early Carboniferous HP metamorphism in the Hida Gaien Belt,Japan: Implications for the Palaeozoic tectonic history of proto‐Japan     

Takumi Yoshida  Tomoki Taguchi  Hayato Ueda  Kenji Horie  M. Satish‐Kumar 《Journal of Metamorphic Geology》2021,39(1):77-100

We report two new eclogite localities (at Kanayamadani and Shinadani) in the high‐P (HP) metamorphic rocks of the Omi area in the western most region of Niigata Prefecture, Japan, which form part of the Hida Gaien Belt, and determine metamorphic conditions and pressure–temperature (P–T) paths. The metamorphic evolution of the eclogites is characterized by a tight hairpin‐shaped P–T path from prograde epidote–blueschist facies to peak eclogite facies and then retrograde blueschist facies. The prograde metamorphic stage is characterized by various amphibole (winchite, barroisite, glaucophane) inclusions in garnet, whereas the peak eclogite facies assemblage is characterized by omphacite, garnet, phengite and rutile. Peak P–T conditions of the eclogites were estimated to be ~600°C and up to 2.0 GPa by conventional cation‐exchange thermobarometry, Ti‐in‐zircon thermometry and quartz inclusion Raman barometry respectively. However, the Raman spectra of carbonaceous material thermometry of metapelites associated with the eclogites gave lower peak temperatures, possibly due to metamorphism at different conditions before being brought together during exhumation. The blueschist facies overprint following the peak of metamorphism is recognized by the abundance of glaucophane in the matrix. Zircon grains in blueschist facies metasedimentary samples from two localities adjacent to the eclogites have distinct oscillatory‐zoned cores and overgrowth rims. Laser ablation inductively coupled plasma mass spectrometry U–Pb ages of the detrital cores yield a wide range between 3,200 and 400 Ma, with a peak at 600–400 Ma. In the early Palaeozoic, proto‐Japan was located along the continental margin of the South China craton, providing the source of the older population of detrital zircon grains (3,200–600 Ma) deposited in the trench‐fill sediments. In addition, subduction‐related magmatism c. 500–400 Ma is recorded in the crust below proto‐Japan, which might have been the source for the younger detrital zircon grains. The peak metamorphic age was constrained by SHRIMP dating of the overgrowth rims, yielding Tournaisian ages of 347 ± 4 Ma, suggesting subduction in the early Carboniferous. Our results provide clear constraints on the initiation of subduction, accretion and the development of an arc‐trench system along the active continental margin of the South China craton and help to unravel the Palaeozoic tectonic history of proto‐Japan.  相似文献   

Assessment of urban heat island effect for different land use–land cover from micrometeorological measurements and remote sensing data for megacity Delhi     

Manju Mohan  Yukihiro Kikegawa  B. R. Gurjar  Shweta Bhati  Narendra Reddy Kolli 《Theoretical and Applied Climatology》2013,112(3-4):647-658

Urban heat island intensities (UHI) have been assessed based on in situ measurements and satellite-derived observations for the megacity Delhi during a selected period in March 2010. A network of micrometeorological observational stations was set up across the city. Site selection for stations was based on dominant land use–land cover (LULC) classification. Observed UHI intensities could be classified into high, medium and low categories which overall correlated well with the LULC categories viz. dense built-up, medium dense built-up and green/open areas, respectively. Dense urban areas and highly commercial areas were observed to have highest UHI with maximum hourly magnitude peaking up to 10.7 °C and average daily maximum UHI reaching 8.3 °C. UHI obtained in the study was also compared with satellite-derived land surface temperatures (LST). UHI based on in situ ambient temperatures and satellite-derived land surface temperatures show reasonable comparison during nighttime in terms of UHI magnitude and hotspots. However, the relation was found to be poor during daytime. Further, MODIS-derived LSTs showed overestimation during daytime and underestimation during nighttime when compared with in situ skin temperature measurements. Impact of LULC was also reflected in the difference between ambient temperature and skin temperature at the observation stations as built-up canopies reported largest gradient between air and skin temperature. Also, a comparison of intra-city spatial temperature variations based UHI vis-à-vis a reference rural site temperature-based UHI indicated that UHI can be computed with respect to the station measuring lowest temperature within the urban area in the absence of a reference station in the rural area close to the study area. Comparison with maximum and average UHI of other cities of the world revealed that UHI in Delhi is comparable to other major cities of the world such as London, Tokyo and Beijing and calls for mitigation action plans.  相似文献   

The high-pressure and temperature equation of state of a majorite solid solution in the system of Mg4Si4O12-Mg3Al2Si3O12     

H. Morishima  E. Ohtani  T. Kato  T. Kubo  A. Suzuki  T. Kikegawa  O. Shimomura 《Physics and Chemistry of Minerals》1999,27(1):3-10

The high-pressure and temperature equation of state of majorite solid solution, Mj_0.8Py_0.2, was determined up to 23 GPa and 773 K with energy-dispersive synchrotron X-ray diffraction at high pressure and high temperature using the single- and double-stage configurations of the multianvil apparatuses, MAX80 and 90. The X-ray diffraction data of the majorite sample were analyzed using the WPPD (whole-powder-pattern decomposition) method to obtain the lattice parameters. A least-squares fitting using the third-order Birch-Murnaghan equation of state yields the isothermal bulk modulus, K _T0  = 156 GPa, its pressure derivative, K′ = 4.4(±0.3), and temperature derivative (∂K _T /∂T) _P = −1.9(±0.3)× 10⁻² GPa/K, assuming that the thermal expansion coefficient is similar to that of pyrope-almandine solid solution. Received: 5 October 1998 / Revised, accepted: 24 June 1999  相似文献   

Development of density measurement for metals at high pressures and high temperatures using X-ray absorption imaging combined with externally heated diamond anvil cell     

Yusaku Takubo  Hidenori Terasaki  Tadashi Kondo  Shingo Mitai  Seiji Kamada  Takumi Kikegawa  Akihiko Machida 《Comptes Rendus Geoscience》2019,351(2-3):182-189

A technique for density measurement under high pressure and high temperature was developed using the X-ray absorption imaging method combined with an externally heated diamond anvil cell. The densities of solid and liquid In were measured in the pressure and temperature ranges of 3.2–18.6 GPa and 294–719 K. The densities obtained through the X-ray absorption imaging method were in good agreement (less than 2.0% difference) with those obtained through X-ray diffraction. Based on the measured density, the isothermal bulk modulus of solid In is determined as 48.0 ± 1.1?40.9 ± 0.8 GPa at 500 K, assuming K′ = 4 to 6. The compression curve of liquid In approaches that of solid In at higher pressures and does not cross over the solid compression curve in the measurement range. The present technique enables us to determine the densities of both solids and liquids precisely in a wide pressure and temperature range.  相似文献   

Iron-water reaction at high pressure and temperature, and hydrogen transport into the core     

Eiji Ohtani  Naohisa Hirao  Tadashi Kondo  Masayoshi Ito  Takumi Kikegawa 《Physics and Chemistry of Minerals》2005,32(1):77-82

We observed a direct reaction of metallic iron with water to form iron hydride and iron oxide, 3Fe + H₂O–>2FeH_x + FeO, at pressures from 6 GPa to 84 GPa and temperatures above 1,000 K in diamond anvil cell (DAC). Iron hydride is dhcpFeH_x or -FeH_x, and iron oxide has the rhombohedral or B1 structure at pressures at least up to 37 GPa. The formation of an assembly composed of dhcpFeH_x and FeO with the B8 structure was observed at 84 GPa. In primordial Earth, water formed by dehydration of the low temperature primitive materials reacts with metallic iron in the high temperature component to form iron hydride FeH_x and iron oxide FeO. The former would be incorporated in the iron forming the core. Thus hydrogen could be an important element of the Earths core. This reaction would be essential for transport of hydrogen into the core in the accretion stage of the Earth.  相似文献   

Salinity in Soils and Tsunami Deposits in Areas Affected by the 2010 Chile and 2011 Japan Tsunamis   总被引：1，自引：0，他引：1  

Takumi Yoshii  Masahiro Imamura  Masafumi Matsuyama  Syunichi Koshimura  Masashi Matsuoka  Erick Mas  Cesar Jimenez 《Pure and Applied Geophysics》2013,170(6-8):1047-1066

The accumulation of data sets of past tsunamis is the most basic but reliable way to prepare for future tsunamis because the frequency of tsunami occurrence and their magnitude can be estimated by historical records of tsunamis. Investigation of tsunami deposits preserved in geological layers is an effective measure to understand ancient tsunamis that occurred before historical records began. However, the areas containing tsunami deposits can be narrower than the area of tsunami inundation, thus resulting in underestimation of the magnitude of past tsunamis. A field survey was conducted after the 2010 Chile tsunami and 2011 Japan tsunami to investigate the chemical properties of the tsunami-inundated soil to examine the applicability of tsunami inundation surveys considering water-soluble salts in soil. The soil and tsunami deposits collected in the tsunami-inundated areas are rich in water-soluble ions (Na⁺, Mg²⁺, Cl^?, Br^? and SO ₄ ^2? ) compared with the samples collected in the non-inundated areas. The analytical result that the ratios of Na⁺, Mg²⁺, Br^? and SO ₄ ^2? to Cl^? are nearly the same in the tsunami deposits and in the tsunami-inundated soil suggests that the deposition of these ions resulting from the tsunami inundation does not depend on whether or not tsunami deposits exist. Discriminant analysis of the tsunami-inundated areas using the ion contents shows the high applicability of these ions to the detection of tsunami inundation during periods when the amount of rainfall is limited. To examine the applicability of this method to palaeotsunamis, the continuous monitoring of water-soluble ions in tsunami-inundated soil is needed as a future study.  相似文献   

The stability and equation of state for the cotunnite phase of TiO2 up to 70 GPa     

Daisuke Nishio-Hamane  Asa Shimizu  Ritsuko Nakahira  Ken Niwa  Asami Sano-Furukawa  Taku Okada  Takehiko Yagi  Takumi Kikegawa 《Physics and Chemistry of Minerals》2010,37(3):129-136

The stability and equation of state for the cotunnite phase in TiO₂ were investigated up to a pressure of about 70 GPa by high-pressure in situ X-ray diffraction measurements using a laser-heated diamond anvil cell. The transition sequence under high pressure was rutile → α-PbO₂ phase → baddeleyite phase → OI phase → cotunnite phase with increasing pressure. The cotunnite phase was the most stable phase at pressures from 40 GPa to at least 70 GPa. The equation of state parameters for the cotunnite phase were established on the platinum scale using the volume data at pressures of 37–68 GPa after laser annealing, in which the St value, an indicator of the magnitude of the uniaxial stress component in the samples, indicates that these measurements were performed under quasi-hydrostatic conditions. The third-order Birch-Murnaghan equation of state at K ₀′ = 4.25 yields V ₀ = 15.14(5) cm³/mol and K ₀ = 294(9), and the second-order Birch-Murnaghan equation of state yields V ₀ = 15.11(5) cm³/mol and K ₀ = 306(9). Therefore, we conclude that the bulk modulus for the cotunnite phase is not comparable to that of diamond.  相似文献