Sulfur chemistry in the Venus mesosphere from SO₂ and SO microwave spectra     

Brad J. Sandor  R. Todd Clancy  Gerald Moriarty-Schieven 《Icarus》2010,208(1):49-60

First measurements of SO₂ and SO in the Venus mesosphere (70-100 km) are reported. This altitude range is distinctly above the ∼60-70 km range to which nadir-sounding IR and UV investigations are sensitive. Since July 2004, use of ground-based sub-mm spectroscopy has yielded multiple discoveries. Abundance of each molecule varies strongly on many timescales over the entire sub-Earth Venus hemisphere. Diurnal behavior is evident, with more SO₂, and less SO, at night than during the day. Non-diurnal variability is also present, with measured SO₂ and SO abundances each changing by up to 2× or more between observations conducted on different dates, but at fixed phase, hence identical sub-Earth Venus local times. Change as large and rapid as a 5σ doubling of SO on a one-week timescale is seen. The sum of SO₂ and SO abundances varies by an order of magnitude or more, indicating at least one additional sulfur reservoir must be present, and that it must function as both a sink and source for these molecules. The ratio SO₂/SO varies by nearly two orders of magnitude, with both diurnal and non-diurnal components. In contrast to the strong time dependence of molecular abundances, their altitude distributions are temporally invariant, with far more SO₂ and SO at 85-100 km than at 70-85 km. The observed increase of SO₂ mixing ratio with altitude requires that the primary SO₂ source be upper mesospheric photochemistry, contrary to atmospheric models which assert upward transport as the only source of above-cloud SO₂. Abundance of upper mesospheric aerosol, with assumption that it is composed primarily of sulfuric acid, is at least sufficient to provide the maximum gas phase (SO + SO₂) sulfur reported in this study. Sulfate aerosol is thus a plausible source of upper mesospheric SO₂.  相似文献   

The Kabanga Ni sulfide deposit, Tanzania: I. Geology, petrography, silicate rock geochemistry, and sulfur and oxygen isotopes   总被引：1，自引：0，他引：1  

Wolfgang D. Maier  Sarah-Jane Barnes  Arindam Sarkar  Ed Ripley  Chusi Li  Tim Livesey 《Mineralium Deposita》2010,45(5):419-441

The Kabanga Ni sulfide deposit represents one of the most significant Ni sulfide discoveries of the last two decades, with current indicated mineral resources of 23.23 Mt at 2.64% Ni and inferred mineral resources of 28.5 Mt at 2.7% Ni (Nov. 2008). The sulfides are hosted by a suite of ∼1.4 Ga ultramafic–mafic, sill-like, and chonolithic intrusions that form part of the approximately 500 km long Kabanga–Musongati–Kapalagulu igneous belt in Tanzania and Burundi. The igneous bodies are up to about 1 km thick and 4 km long. They crystallized from several compositionally distinct magma pulses emplaced into sulfide-bearing pelitic schists. The first magma was a siliceous high-magnesium basalt (approximately 13.3% MgO) that formed a network of fine-grained acicular-textured gabbronoritic and orthopyroxenitic sills (Mg# opx 78–88, An plag 45–88). The magma was highly enriched in incompatible trace elements (LILE, LREE) and had pronounced negative Nb and Ta anomalies and heavy O isotopic signatures (δ¹⁸O +6 to +8). These compositional features are consistent with about 20% contamination of primitive picrite with the sulfidic pelitic schists. Subsequent magma pulses were more magnesian (approximately 14–15% MgO) and less contaminated (e.g., δ¹⁸O +5.1 to +6.6). They injected into the earlier sills, resulting in the formation of medium-grained harzburgites, olivine orthopyroxenites and orthopyroxenites (Fo 83–89, Mg# _opx 86–89), and magmatic breccias consisting of gabbronorite–orthopyroxenite fragments within an olivine-rich matrix. All intrusions in the Kabanga area contain abundant sulfides (pyrrhotite, pentlandite, and minor chalcopyrite and pyrite). In the lower portions and the immediate footwall of two of the intrusions, namely Kabanga North and Kabanga Main, there occur numerous layers, lenses, and veins of massive Ni sulfides reaching a thickness of several meters. The largest amount of high grade, massive sulfide occurs in the smallest intrusion (Kabanga North). The sulfides have heavy S isotopic signatures (δ³⁴S wr = +10 to +24) that broadly overlap with those of the country rock sulfides, consistent with significant assimilation of external sulfur from the Karagwe–Ankolean sedimentary sequence. However, based partly on the relatively homogenous distribution of disseminated sulfides in many of the intrusive rocks, we propose that the Kabanga magmas reached sulfide saturation prior to final emplacement, in staging chambers or feeder conduits, followed by entrainment of the sulfides during continued magma ascent. Oxygen isotope data indicate that the mode of sulfide assimilation changed with time. The heavy δ¹⁸O ratios of the early magmas are consistent with ingestion of the sedimentary country rocks in bulk. The relatively light δ¹⁸O ratios of the later magmas indicate less bulk assimilation of the country rocks, but in addition the magmas selectively assimilated additional S, possibly through devolatization of the country rocks or through cannibalization of magmatic sulfides deposited in the conduits by preceding magma surges. The intrusions were tilted at ca. 1.37 Ga, during the Kibaran orogeny and associated synkinematic granite plutonism. This caused solid-state mobilization of ductile sulfides into shear zones, notably along the base of the intrusions where sulfide-hornfels breccias and lenses and layers of massive sulfides may reach a thickness of >10 m and can extend for several 10 s to >100 m away from the intrusions. These horizons represent an important exploration target for additional nickel sulfide deposits.  相似文献   

Hydrochemical characteristics and brine evolution paths of Lop Nor Basin,Xinjiang Province,Western China     

Lichun Ma  Tim K. Lowenstein  Baoguo Li  Pingan Jiang  Chenglin Liu  Junpin Zhong  Jiandong Sheng  Honglie Qiu  Hongqi Wu 《Applied Geochemistry》2010

  相似文献   

A registry framework and Rosetta attributes for distributed science     

Todd King  Jan Merka  Thomas Narock  Raymond Walker  Lee Bargatze 《Earth Science Informatics》2010,3(1-2):127-133

  相似文献   

SPASE 2.0: a standard data model for space physics     

Todd King  James Thieman  D. Aaron Roberts 《Earth Science Informatics》2010,3(1-2):67-73

SPASE—for Space Physics Archive Search and Extract—is a group with a charter to promote collaboration and sharing of data for the Space Plasma Physics community. A major activity is the definition of the SPASE Data Model which defines the metadata necessary to describe resources in the broader heliophysics data environment. The SPASE Data Model is primarily a controlled vocabulary with hierarchical relationships and with the ability to form associations between described resources. It is the result of many years of effort by an international collaboration (see http://www.spase-group.org) to unify and improve on existing Space and Solar Physics data models. The genesis of the SPASE group can be traced to 1998 when a small group of individuals saw a need for a data model. Today SPASE has a large international participation from many of the major space research organizations. The design of the data model is based on a set of principles derived from evaluation of the existing heliophysics data environment. The development guidelines for the data model are consistent with ISO-2788 (expanded in ANSI/NISO Z39.19) and the administration for the data model is comparable to that described in the ISO standards ISO-11179 and ISO-20943. Since the release of version 1.0 of the data model in 2005, the model has undergone a series of evolutions. SPASE released version 2.0 of its data model in April 2009. This version presents a significant change from the previous release. It includes the capability to describe a wider range of data products and to describe expert annotations which can be associated with a resource. Additional improvements include an enhanced capability to describe resource associations and a more unified approach to describing data products. Version 2.0 of the SPASE Data Model provides a solid foundation for continued integration of worldwide research activities and the open sharing of data.  相似文献   

Exploring Saturation of Themes and Spatial Locations in Qualitative Public Participation Geographic Information Systems Research     

Wayde C. Morse  Damon R. Lowery  Todd Steury 《社会与自然资源》2014,27(5):557-571

Use of public participation geographic information systems (PPGIS) studies that collect local knowledge in a spatial format is increasing as a tool in natural resources management. Qualitative PPGIS studies have been conducted as individual interviews, as workshops, and in focus groups. As the number of qualitative PPGIS studies increases, so does the need to understand their quality. Saturation, the point when the researcher determines that the collection of additional data will provide minimal new information as it relates to a particular issue, directly reflects on the validity of the study. While the concept of saturation is well established, it is still inconsistently assessed and reported. Furthermore, how saturation applies to qualitatively collected spatial data has not been addressed. A method is presented to assess spatial saturation of qualitative PPGIS data from 19 focus groups that were conducted to investigate important places for recreation, livelihoods, and the environment in the Florida Panhandle.  相似文献   

Identifying hot spots of security vulnerability associated with climate change in Africa     

Joshua W. Busby  Kerry H. Cook  Edward K. Vizy  Todd G. Smith  Mesfin Bekalo 《Climatic change》2014,124(4):717-731

Given its high dependence on rainfed agriculture and its comparatively low adaptive capacity, Africa is frequently invoked as especially vulnerable to climate change. Within Africa, there is likely to be considerable variation in vulnerability to climate change both between and within countries. This paper seeks to advance the agenda of identifying the hot spots of what we term “climate security” vulnerability, areas where the confluence of vulnerabilities could put large numbers of people at risk of death from climate-related hazards. This article blends the expertise of social scientists and climate scientists. It builds on a model of composite vulnerability that incorporates four “baskets” or processes that are thought to contribute to vulnerability including: (1) physical exposure, (2) population density, (3) household and community resilience, and (4) governance and political violence. Whereas previous iterations of the model relied on historical physical exposure data of natural hazards, this paper uses results from regional model simulations of African climate in the late 20th century and mid-21st century to develop measures of extreme weather events—dry days, heat wave events, and heavy rainfall days—coupled with an indicator of low-lying coastal elevation. For the late 20th century, this mapping process reveals the most vulnerable areas are concentrated in Chad, the Democratic Republic of the Congo, Niger, Somalia, Sudan, and South Sudan, with pockets in Burkina Faso, Ethiopia, Guinea, Mauritania, and Sierra Leone. The mid 21st century projection shows more extensive vulnerability throughout the Sahel, including Burkina Faso, Chad, Mali, northern Nigeria, Niger, and across Sudan.  相似文献   

Identifying the Real Pollinators? Exotic Honeybees Are the Dominant Flower Visitors and Only Effective Pollinators of Avicennia marina in Australian Temperate Mangroves     

Tyge D. Hermansen  David R. Britton  David J. Ayre  Todd E. Minchinton 《Estuaries and Coasts》2014,37(3):621-635

The literature suggests that, in the tropics, mangroves are typically pollinated by a range of generalist pollinators, whereas in temperate populations, pollination biology is largely unstudied. We predicted that, for the mangrove Avicennia marina in temperate southeast Australia, pollinator diversity would be low and its pollination system modified by the exotic honeybee Apis mellifera. Multiyear surveys and experiments were used to test these hypotheses by determining the identity and frequency of flower visitors, quantifying pollinator foraging behaviour, determining the species composition of pollen loads, and demonstrating pollen removal and deposition. We identified 38 species that visited flowers, but only A. mellifera was a significant pollinator. It was the only species to carry large amounts of pollen and forage in a manner permitting transfer of pollen to stigmas. Moreover, A. mellifera was the numerically dominant flower visitor and was effective in both pollen removal and deposition. This study demonstrates the importance of distinguishing flower visitors from pollinators and emphasises the surprisingly widespread influence of the exotic A. mellifera. Finally, our study and a worldwide review of the literature on the pollination of mangroves reveal that the pollination biology of other mangrove systems requires similar scrutiny.  相似文献   

Continuous zircon growth during long-lived granulite facies metamorphism: a microtextural,U–Pb,Lu–Hf and trace element study of Caledonian rocks from the Arctic     

Tim?M.?O’BrienEmail author  Elizabeth?L.?Miller 《Contributions to Mineralogy and Petrology》2014,168(4):1071

Microtextural, U–Pb, trace element and Lu–Hf analyses of zircons from gneisses dredged from the Chukchi Borderland indicate a long-lived, Cambrian–Ordovician, granulite facies metamorphism. These results reveal a complete prograde, peak and cooling history of zircon growth during anatexis. Early increasing temperatures caused modification and Pb-loss of Precambrian zircons by recrystallization and dissolution/re-precipitation of existing grains. Small variations in initial ¹⁷⁶Hf/¹⁷⁷Hf results (0.282325–0.282042) and flat HREE patterns of these zircons indicate that they grew by dissolution/re-precipitation in the presence of garnet. Zircons subsequently crystallized from a partial melt during peak to post-peak metamorphism from 530 to 485 Ma. A broad range of initial ¹⁷⁶Hf/¹⁷⁷Hf ratios (0.282693–0.282050) and mineral inclusions within zircons suggest that this phase of growth incorporated Zr and Hf obtained from the breakdown of Zr-enriched phases. Microtextural evidence along with trace element and isotopic data suggests that final growth of metamorphic rims on zircon occurred during slow cooling and crystallization of residual partial melts during the early Ordovician (485–470 Ma). Younger, late Ordovician–Silurian (420–450 Ma) euhedral, oscillatory-zoned, trace element-enriched zircons crystallized within leucocratic veins that intrude the gneisses. Their age corresponds to granitoids dated from this same dredge. The intrusives and veins provide evidence that the Chukchi Borderland rifted from a position near Pearya and northwest Svalbard, which represent the northern continuation of the Caledonian orogen. Evidence for earlier Cambrian metamorphism has not been reported from this region. The age of granulite facies metamorphism reported here represents the earliest phase of deformation in the Arctic Caledonides.  相似文献   

Numerical Modelling of the Anisotropic Mechanical Behaviour of Opalinus Clay at the Laboratory-Scale Using FEM/DEM   总被引：1，自引：1，他引：0  

Andrea Lisjak  Bryan S. A. Tatone  Giovanni Grasselli  Tim Vietor 《Rock Mechanics and Rock Engineering》2014,47(1):187-206

The Opalinus Clay (OPA) is an argillaceous rock formation selected to host a deep geologic repository for high-level nuclear waste in Switzerland. It has been shown that the excavation damaged zone (EDZ) in this formation is heavily affected by the anisotropic mechanical response of the material related to the presence of bedding planes. In this context, the purpose of this study is twofold: (i) to illustrate the new developments that have been introduced into the combined finite-discrete element method (FEM/DEM) to model layered materials and (ii) to demonstrate the effectiveness of this new modelling approach in simulating the short-term mechanical response of OPA at the laboratory-scale. A transversely isotropic elastic constitutive law is implemented to account for the anisotropic elastic modulus, while a procedure to incorporate a distribution of preferentially oriented defects is devised to capture the anisotropic strength. Laboratory results of indirect tensile tests and uniaxial compression tests are used to calibrate the numerical model. Emergent strength and deformation properties, together with the simulated damage mechanisms, are shown to be in strong agreement with experimental observations. Subsequently, the calibrated model is validated by investigating the effect of confinement and the influence of the loading angle with respect to the specimen anisotropy. Simulated fracture patterns are discussed in the context of the theory of brittle rock failure and analyzed with reference to the EDZ formation mechanisms observed at the Mont Terri Underground Research Laboratory.  相似文献