Constraints on crustal and mantle structure of the oceanic plate south of Iceland from ocean bottom recorded Rayleigh waves     

Frederik J. Tilmann  Torsten Dahm 《Tectonophysics》2008,447(1-4):66

From April to July 2002 we carried out a deployment of 6 ocean bottom seismometers and 4 ocean bottom hydrophones in the North Atlantic south of Iceland. During the deployment period we recorded clear Rayleigh waves from 2 regional and 14 teleseismic earthquakes. This corresponds to a Rayleigh wave detection rate of nearly 92% for events with M_W ≥ 6.06.0 and epicentral distance less than 110°, close to detection rate estimates based on noise level variability. We measured Rayleigh wave event-station group dispersion and inter-station phase dispersion for one Mid-Atlantic Ridge event. The group dispersion curve is sensitive to the structure of the North-East Atlantic with an average age of  39 Myr. The phase dispersion curve is sensitive to the structure just south of Iceland (average plate age 33 Myr). Both dispersion curves indicate faster velocities than previously postulated for oceanic plate generated at the Reykjanes Ridge. A grid search approach was used to constrain the range of models fitting the data. The high velocity seismic lid just south of Iceland in the model for the phase dispersion path is slower or thinner than in the group dispersion model, which averages over a larger area and a somewhat older plate age, but the velocities in the low velocity half space are similar. We further consider the residual bathymetry in the experimental area. The residual anomaly decreases by 300–400 m from the Reykjanes Ridge to the  30 Myr old plate south of Iceland. This decrease can be explained by the disappearance of a mantle thermal anomaly associated with the Iceland plume. Both the residual bathymetry and the surface wave data are thus consistent with the notion that the southward spreading of the Icelandic plume is channelised underneath the Reykjanes Ridge and does not spread far outside this channel.Based on the experience from the pilot experiment, we estimate that a minimum recording time of 13–15 months in favourable weather conditions (April–September) is required to record enough data to map the spreading plume with surface waves, and to produce a tomographic image to a depth of 1000 km using body waves. This can be achieved by a continuous deployment of at least  20 months, or by two or three deployments during the spring and summer of consecutive years.  相似文献   

Late quaternary hydrological changes at Tangra Yumco,Tibetan Plateau: a compound-specific isotope-based quantification of lake level changes     

Franziska Günther  Andrej Thiele  Sophie Biskop  Roland Mäusbacher  Torsten Haberzettl  Tandong Yao  Gerd Gleixner 《Journal of Paleolimnology》2016,55(4):369-382

  相似文献   

On the applicability of viscosity-based capillary bundle concepts to predict the penetration behaviour of polymer solutions into sand     

Verst  Rowena  Lieske  Wolfgang  Baille  Wiebke  Pulsfort  Matthias  Wichtmann  Torsten 《Acta Geotechnica》2022,17(2):497-510

Acta Geotechnica - The increasing use of polymer solutions as support fluids in pile drilling, diaphragm walling or tunnelling applications demands a more detailed discussion of their penetration...  相似文献   

High‐resolution remote sensing and GIS techniques for geobase data supporting archaeological surveys: A case study of ancient Doliche,southeast Turkey     

Torsten Prinz  Benedikt Lasar  Karl Peter Krüger 《Geoarchaeology》2010,25(3):352-374

The detection, surveying, and analysis of ancient settlement structures using remote sensing techniques offer a unique opportunity to quickly map the locations of archaeological objects in a relatively short time. High‐resolution images contribute information to the documentation and spatial relation of these objects, especially if Geographic Information Systems (GIS) and Web‐based applications are used. The aim of this study was to assess the potential use of satellite data and aerial imagesacquired by a remote‐controlled balloon to generate geospatial data with a range of resolutions and information depths. The study area was Doliche, in the landscape of ancient Commagene (Turkey), where conventional flight campaigns are impossible or strongly restricted. Recently generated data sets (i.e., topographic maps, ortho‐images, terrain models) were combined with field observations to derive ancient and modern landscape patterns and their possible relation to an assumed “ancient procession road” between the village Doliche (Dülük) and the nearby sanctuary of theRoman divinity Iupiter Dolichenus. © 2010 Wiley Periodicals, Inc.  相似文献   

Eckfeld Maar: Window into an Eocene Terrestrial Habitat in Central Europe   总被引：1，自引：1，他引：0  

Herbert Lutz  Uwe KaulfuSS  Torsten Wappler  Werner L?hnertz  Volker Wilde  Dieter F. Mertz  Jens Mingram  Jens L. Franzen  Herbert Frankenh?user  Martin Koziol 《《地质学报》英文版》2010,84(4):984-1009

<正>To mark the occasion of the 175th anniversary of the Rheinische Naturforschende Gesellschaft in 2009 and of the centennial of the Mainz Natural History Museum in 2010,we present a short account of our present knowledge of the Eckfeld Maar after 20 years of continuous research.This paper does not attempt to include all of the detailed results on the geology of the Eckfeld site or its biota.To date,nearly 250 papers and books have been published since the start of our project.An up-to-date list of these publications can be found at www.eckfeldermaar. de.  相似文献   

Boron and Oxygen Isotope Composition of Certified Reference Materials NIST SRM 610/612 and Reference Materials JB-2 and JR-2   总被引：1，自引：0，他引：1  

Simone Kasemann  Anette Meixner  Alexander Rocholl  Torsten Vennemann  Martin Rosner  Axel K. Schmitt  Michael Wiedenbeck 《Geostandards and Geoanalytical Research》2001,25(2-3):405-416

We present data on the concentration, the isotope composition and the homogeneity of boron in NIST silicate glass reference materials SRM 610 and SRM 612, and in powders and glasses of geological reference materials JB-2 (basalt) and JR-2 (rhyolite). Our data are intended to serve as references for both microanalytical and wet-chemical techniques. The δ¹¹ B compositions determined by N-TIMS and P-TIMS agree within 0.5% and compare with SIMS data within 2.5%. SIMS profiles demonstrate boron isotope homogeneity to better than δ¹¹ B = 2% for both NIST glasses, however a slight boron depletion was detected towards the outermost 200 μm of the rim of each sample wafer. The boron isotope compositions of SRM 610 and SRM 612 were indistinguishable. Glasses produced in this study by fusing JB-2 and JR-2 powder also showed good boron isotope homogeneity, both within and between different glass fragments. Their major element abundance as well as boron isotope compositions and concentrations were identical to those of the starting composition. Hence, reference materials (glasses) for the in situ measurement of boron isotopes can be produced from already well-studied volcanic samples without significant isotope fractionation. Oxygen isotope ratios, both within and between wafers, of NIST reference glasses SRM 610 and SRM 612 are uniform. In contrast to boron, significant differences in oxygen isotope compositions were found between the two glasses, which may be due to the different amounts of trace element oxides added at ten-fold different concentration levels to the silicate matrix.  相似文献   

Mineral deposit formation in Phanerozoic sedimentary basins of north-east Africa: the contribution of weathering     

Klaus Germann  Torsten Schwarz  Mario Wipki 《International Journal of Earth Sciences》1994,83(4):787-798

The intra- and epicontinental basins in north-east Africa (Egypt, Sudan) bear ample evidence of weathering processes repeatedly having contributed to the formation of mineral deposits throughout the Phanerozoic.The relict primary weathering mantle of Pan-African basement rocks consists of kaolinitic saprolite, laterite (in places bauxitic) and iron oxide crust. On the continent, the reaccumulation of eroded weathering-derived clay minerals (mainly kaolinite) occurred predominantly in fluvio-lacustrine environments, and floodplain and coastal plain deposits. Iron oxides, delivered from ferricretes, accumulated as oolitic ironstones in continental and marine sediments. Elements leached from weathering profiles accumulated in continental basins forming silcrete and alunite or in the marine environment contributing to the formation of attapulgite/saprolite and phosphorites.The Early Paleozoic Tawiga bauxitic laterite of northern Sudan gives a unique testimony of high latitude lateritic weathering under global greenhouse conditions. It formed in close spatial and temporal vicinity to the Late Ordovician glaciation in north Africa. The record of weathering products is essentially complete for the Late Cretaceous/Early Tertiary. From the continental sources in the south to the marine sinks in the north, an almost complete line of lateritic and laterite-derived deposits of bauxitic kaolin, kaolin, iron oxides and phosphates is well documented.  相似文献   

Studies of Brazilian meteorites: III. Origin and history of the Angra dos Reis achondrite     

M. Prinz  K. Keil  P.F. Hlava  J.L. Berkley  C.B. Gomes  W.S. Curvello 《Earth and Planetary Science Letters》1977,35(2):317-330

The Angra dos Reis meteorite fell in 1869 and is a unique achondrite. It is an ultramafic igneous rock, pyroxenite, with 93% fassaite pyroxene which has 15.7% Ca-Tschermak's molecule, plus calcic olivine (Fo_53.1; 1.3% CaO), green hercynitic spinel, whitlockite (merrillite), metallic Ni-Fe, troilite, as well as magnesian kirschsteinite (Ks_62.3Mo_37.7), within olivine grains, and celsian (Cs_90.2An_7.7Ab_1.7Or_0.4) which are phases reported in a meteorite for the first time, and plagioclase (An_86.0), baddeleyite, titanian magnetite (TiO₂, 21.9%), and terrestrial hydrous iron oxide which are phases reported for the first time in this meteorite. Petrofabric analysis shows that fassaite has a preferred orientation and lineation which is interpreted as being due to cumulus processes, possibly the effect of post-depositional magmatic current flow or laminar flow of a crystalline mush. The mineral chemistry indicates crystallization from a highly silica-undersaturated melt at low pressure. Since the meteorite formed as a cumulate, pyroxene crystals may have gravitationally settled from a melt which crystallized melilite first. Plagioclase would be unstable in such a highly undersaturated melt, and feldspathoids would be rare or absent due to the very low alkali contents of the melt. The presence of rare grains of plagioclase and celsian may be the result of late-stage crystallization of residual liquids in local segregations. Thus, the Eu anomaly in Angra dos Reis may be the result of pyroxene separation from a melt which crystallized melilite earlier, rather than plagioclase as previously suggested.  相似文献   

Ultramafic inclusions from San Carlos,Arizona: Petrologic and geochemical data bearing on their petrogenesis   总被引：5，自引：0，他引：5  

Frederick A. Frey  Martin Prinz 《Earth and Planetary Science Letters》1978,38(1):129-176

Ultramafic inclusions from San Carlos, Arizona, are classified into two groups. Group I inclusions are dominated by magnesian (Mg/Mg + ΣFe= 0.86 – 0.91), olivine-rich peridotites containing Cr-rich clinopyroxene and spinel. The less abundant Group I pyroxenites (containing Mg- and Cr-rich pyroxenes) occur as discrete inclusions and as portions of composite inclusions where they have a sharp, planar interface with lherzolite. Group II inclusions are dominated by clinopyroxene-rich peridotites containing Al- and Ti-rich augite and commonly abundant, Al-rich spinel. Compared to Group I inclusions, they are more Fe-rich (Mg/Mg + ΣFe= 0.62 – 0.78) and more hetereogeneous in composition and modal proportions. Similar groups occur at many ultramafic inclusion localities.Our petrographic and geochemical results lead to the following conclusions. Olivine-rich Group I inclusions are not genetically related to the host basanite, and they are formed from two components. Component A is a partial melting residue; it comprises the major portion of these inclusions and determines the modal mineralogy and major and compatible trace element composition. Component B results from a small degree (<5%) of garnet peridotite melting (probably, within the low-velocity zone). This highly LIL-element-enriched melt has migrated upwards into the overlying component A where it crystallized primarily as clinopyroxene and amphibole, and thus, introduced LIL elements into the residual component A. Subsequent cooling and subsolidus recrystallization have removed textural evidence of this mixing. This model has also been proposed for olivine-rich Group I inclusions from Victoria, Australia. At Victoria and San Carlos some relatively clinopyroxene-rich Group I lherzolites are not contaminated by component B, and they represent the best estimates of upper mantle composition prior to melting. Group I orthopyroxenites may be fragments of tectonic layers formed in lherzolite, but they could also be early cumulates (now metamorphosed) from the melt in equilibrium with component A. Group I clinopyroxenites have geochemical features of clinopyroxene in equilibrium with a magma. Thus, they could also represent early cumulates (now metamorphosed) from a magma unrelated to the host basanite. Alternatively, their geochemical characteristics could result from more complex models such as residues from partial remelting of pyroxenite dikes and veins or intradike segregation processes such as filter pressing. All Group II inclusions studied appear to be cumulates derived from a SiO₂-undersaturated magma, possibly an early magma in the same volcanic episode which culminated with eruption of the host basanite. The poikilitic texture of amphibole-rich (kaersutite) inclusions is consistent with a cumulate origin. The bulk compositions of Group II inclusions are not equivalent to typical basaltic compositions.  相似文献   

Development of fluid conduits in the auriferous shear zones of the Hutti Gold Mine, India: evidence for spatially and temporally heterogeneous fluid flow   总被引：1，自引：0，他引：1  

Jochen Kolb  Amanda Rogers  F. Michael Meyer  Torsten W. Vennemann 《Tectonophysics》2004,378(1-2):65-84

The gold mineralization of the Hutti Mine is hosted by nine parallel, N–S trending, steeply dipping, 2–10 m wide shear zones, that transect Archaean amphibolites. The shear zones were formed after peak metamorphism during retrograde ductile D₂ shearing in the lower amphibolite facies. They were reactivated in the lower to mid greenschist facies by brittle–ductile D₃ shearing and intense quartz veining. The development of a S₂–S₃ crenulation cleavage facilitates the discrimination between the two deformation events and contemporaneous alteration and gold mineralization. Ductile D₂ shearing is associated with a pervasively developed distal chlorite–sericite alteration assemblage in the outer parts of the shear zones and the proximal biotite–plagioclase alteration in the center of the shear zones. D₃ is characterized by development of the inner chlorite-K-feldspar alteration, which forms a centimeter-scale alteration halo surrounding the laminated quartz veins and replaces earlier biotite along S₃. The average size of the laminated vein systems is 30–50 m along strike as well as down-dip and 2–6 m in width.Mass balance calculations suggest strong metasomatic changes for the proximal biotite–plagioclase alteration yielding mass and volume increase of ca. 16% and 12%, respectively. The calculated mass and volume changes of the distal chlorite–sericite alteration (ca. 11%, ca. 8%) are lower. The decrease in δ¹⁸O values of the whole rock from around 7.5‰ for the host rocks to 6–7‰ for the distal chlorite–sericite and the proximal biotite–plagioclase alteration and around 5‰ for the inner chlorite-K-feldspar alteration suggests hydrothermal alteration during two-stage deformation and fluid flow.The ductile D₂ deformation in the lower amphibolite facies has provided grain scale porosities by microfracturing. The pervasive, steady-state fluid flow resulted in a disseminated style of gold–sulfide mineralization and a penetrative alteration of the host rocks. Alternating ductile and brittle D₃ deformation during lower to mid greenschist facies conditions followed the fault-valve process. Ductile creep in the shear zones resulted in a low permeability environment leading to fluid pressure build-up. Strongly episodic fluid advection and mass transfer was controlled by repeated seismic fracturing during the formation of laminated quartz(-gold) veins. The limitation of quartz veins to the extent of earlier shear zones indicate the importance of pre-existing anisotropies for fault-valve action and economic gold mineralization.  相似文献