Magneto–Thermal Evolution of Neutron Stars with Emphasis to Radio Pulsars     

U. Geppert 《Journal of Astrophysics and Astronomy》2017,38(3):46

The magnetic and thermal evolution of neutron stars is a very complex process with many non-linear interactions. For a decent understanding of neutron star physics, these evolutions cannot be considered isolated. A brief overview is presented, which describes the main magneto–thermal interactions that determine the fate of both isolated neutron stars and accreting ones. Special attention is devoted to the interplay of thermal and magnetic evolution at the polar cap of radio pulsars. There, a strong meridional temperature gradient is maintained over the lifetime of radio pulsars. It may be strong enough to drive thermoelectric magnetic field creation which perpetuate a toroidal magnetic field around the polar cap rim. Such a local field component may amplify and curve the poloidal surface field at the cap, forming a strong and small scale magnetic field as required for the radio emission of pulsars.  相似文献   

An overview of socio-economic and ecological perspectives of Fiji's inshore reef fisheries     

Lydia C.L. Teh  Louise S.L. Teh  Ben Starkhouse  U. Rashid Sumaila 《Marine Policy》2009,33(5):807-817

This paper reviews the socio-economic and ecological context of Fijian reef fisheries. This review is deemed necessary because improved understanding of the state and trends of Fiji's coral reef fisheries on a national level is required for designing an effective management plan for Fiji's inshore reef fisheries. The most important point that emerges from our review is that despite numerous studies of Fiji's reef fisheries, the current status of reef-associated fisheries at the national level is still uncertain due, mainly, to the lack of dependable data on the subsistence fisheries. This in turn leads to uncertainty about how the continuation of fishing, in particular, fishing focused on target species for the coral reef resources trade, will affect fishing communities and the ecosystem.  相似文献   

Cascaded image analysis for dynamic crack detection in material testing     

U. Hampel  H.-G. Maas   《ISPRS Journal of Photogrammetry and Remote Sensing》2009,64(4):345-350

Concrete probes in civil engineering material testing often show fissures or hairline-cracks. These cracks develop dynamically. Starting at a width of a few microns, they usually cannot be detected visually or in an image of a camera imaging the whole probe. Conventional image analysis techniques will detect fissures only if they show a width in the order of one pixel. To be able to detect and measure fissures with a width of a fraction of a pixel at an early stage of their development, a cascaded image analysis approach has been developed, implemented and tested. The basic idea of the approach is to detect discontinuities in dense surface deformation vector fields. These deformation vector fields between consecutive stereo image pairs, which are generated by cross correlation or least squares matching, show a precision in the order of 1/50 pixel. Hairline-cracks can be detected and measured by applying edge detection techniques such as a Sobel operator to the results of the image matching process. Cracks will show up as linear discontinuities in the deformation vector field and can be vectorized by edge chaining. In practical tests of the method, cracks with a width of 1/20 pixel could be detected, and their width could be determined at a precision of 1/50 pixel.  相似文献   

3D segmentation of single trees exploiting full waveform LIDAR data     

J. Reitberger  Cl. Schnörr  P. Krzystek  U. Stilla 《ISPRS Journal of Photogrammetry and Remote Sensing》2009,64(6):561-574

This paper highlights a novel segmentation approach for single trees from LIDAR data and compares the results acquired both from first/last pulse and full waveform data. In a first step, a conventional watershed-based segmentation procedure is set up, which robustly interpolates the canopy height model from the LIDAR data and identifies possible stem positions of the tallest trees in the segments calculated from the local maxima of the canopy height model. Secondly, this segmentation approach is combined with a special stem detection method. Stem positions in the segments of the watershed segmentation are detected by hierarchically clustering points below the crown base height and reconstructing the stems with a robust RANSAC-based estimation of the stem points. Finally, a new three-dimensional (3D) segmentation of single trees is implemented using normalized cut segmentation. This tackles the problem of segmenting small trees below the canopy height model. The key idea is to subdivide the tree area in a voxel space and to set up a bipartite graph which is formed by the voxels and similarity measures between the voxels. Normalized cut segmentation divides the graph hierarchically into segments which have a minimum similarity with each other and whose members (= voxels) have a maximum similarity. The solution is found by solving a corresponding generalized eigenvalue problem and an appropriate binarization of the solution vector. Experiments were conducted in the Bavarian Forest National Park with conventional first/last pulse data and full waveform LIDAR data. The first/last pulse data were collected in a flight with the Falcon II system from TopoSys in a leaf-on situation at a point density of 10 points/m². Full waveform data were captured with the Riegl LMS-Q560 scanner at a point density of 25 points/m² (leaf-off and leaf-on) and at a point density of 10 points/m² (leaf-on). The study results prove that the new 3D segmentation approach is capable of detecting small trees in the lower forest layer. So far, this has been practically impossible if tree segmentation techniques based on the canopy height model were applied to LIDAR data. Compared to a standard watershed segmentation procedure, the combination of the stem detection method and normalized cut segmentation leads to the best segmentation results and is superior in the best case by 12%. Moreover, the experiments show clearly that using full waveform data is superior to using first/last pulse data.  相似文献   

Phase center modeling for LEO GPS receiver antennas and its impact on precise orbit determination   总被引：12，自引：5，他引：7  

Adrian Jäggi  R. Dach  O. Montenbruck  U. Hugentobler  H. Bock  G. Beutler 《Journal of Geodesy》2009,83(12):1145-1162

Most satellites in a low-Earth orbit (LEO) with demanding requirements on precise orbit determination (POD) are equipped with on-board receivers to collect the observations from Global Navigation Satellite systems (GNSS), such as the Global Positioning System (GPS). Limiting factors for LEO POD are nowadays mainly encountered with the modeling of the carrier phase observations, where a precise knowledge of the phase center location of the GNSS antennas is a prerequisite for high-precision orbit analyses. Since 5 November 2006 (GPS week 1400), absolute instead of relative values for the phase center location of GNSS receiver and transmitter antennas are adopted in the processing standards of the International GNSS Service (IGS). The absolute phase center modeling is based on robot calibrations for a number of terrestrial receiver antennas, whereas compatible antenna models were subsequently derived for the remaining terrestrial receiver antennas by conversion (from relative corrections), and for the GNSS transmitter antennas by estimation. However, consistent receiver antenna models for space missions such as GRACE and TerraSAR-X, which are equipped with non-geodetic receiver antennas, are only available since a short time from robot calibrations. We use GPS data of the aforementioned LEOs of the year 2007 together with the absolute antenna modeling to assess the presently achieved accuracy from state-of-the-art reduced-dynamic LEO POD strategies for absolute and relative navigation. Near-field multipath and cross-talk with active GPS occultation antennas turn out to be important and significant sources for systematic carrier phase measurement errors that are encountered in the actual spacecraft environments. We assess different methodologies for the in-flight determination of empirical phase pattern corrections for LEO receiver antennas and discuss their impact on POD. By means of independent K-band measurements, we show that zero-difference GRACE orbits can be significantly improved from about 10 to 6 mm K-band standard deviation when taking empirical phase corrections into account, and assess the impact of the corrections on precise baseline estimates and further applications such as gravity field recovery from kinematic LEO positions.  相似文献   

Centre National D'tudes Spatials: Results of the Arcad 3 Projekt and of the recent programmes in magnetospheric and ionospheric physics,Toulouse 84 Cepadues-Editions Toulouse, 1985. ISBN 2-85428-126-8     

C. U. Wogner  T. Kirchner  C.-Y. Mebrer 《Astronomische Nachrichten》1988,309(3):171-172

  相似文献   

土壤剖面的磁学特征及其对交通污染的指示意义——以北京首都机场高速公路为例   总被引：11，自引：7，他引：4       下载免费PDF全文

沈明洁  胡守云  U.Blaha  闫海涛  W.R 《第四纪研究》2007,27(6):1113-1120

对北京首都机场高速公路旁采集的土壤柱状T01剖面的磁学参数和金属元素分析,探讨了研究区内现代交通导致的土壤磁学性质的变化及其对环境污染的响应.结果表明,磁参数(χ,ARM和SIRM)与重金属含量呈同步垂向变化趋势.来源于交通运输排放的污染物是土壤剖面上部(0～8 cm)磁性和金属含量增强的主要原因,8cm以下,土壤基本未受到污染,磁性矿物和重金属含量较低,磁性颗粒变化稳定,基本代表了该地区土壤的自然背景.尽管土壤岩石磁学分析表明剖面上下部受污染和未受污染样品的磁载体均是粒度较粗的多畴磁铁矿,但是结合磁参数比值曲线,说明底部样品的磁颗粒的粒度较顶部偏细.磁性矿物的含量变化没有影响磁颗粒的粒度特征.指标聚类等相关分析表明,土壤磁参数(χ,ARM和SIRM)与重金属元素(Pb,Zn和Cu)含量显著相关;结合模糊聚类分析,磁参数可用于追踪、识别交通污染物质在土壤剖面中的富集、迁移状态,揭示不同深度土壤的污染程度.  相似文献   

Transient two-dimensional groundwater flow     

V. U. NGUYEN  A. J. RAUDKIVI 《水文科学杂志》2013,58(4):427-438

ABSTRACT

A set of simple analytical solutions are presented for estimation of drawdowns and groundwater flow rates into two-dimensional excavation, such as those in open-cut strip mines, for confined, leaky and unconfined aquifers.  相似文献   

Parametric analysis of liquid storage tanks base isolated by curved surface sliding bearings     

Emre Abalı  Eren Uçkan 《Soil Dynamics and Earthquake Engineering》2010,30(1-2):21-31

Curved surface sliding bearings, which are usually called as friction pendulum system (FPS) are commonly used for base isolation of liquid storage tanks since the period of the isolation system is independent of the storage level. However the restoring force and the damping at the isolation system are functions of axial load which changes during an earthquake excitation. This change might be in appreciable amounts especially for the tanks with high aspect ratios. The present paper focuses on earthquake performances of both broad and slender tanks base isolated by FPS bearings. The effects of overturning moment and vertical acceleration on axial load variation at the bearings are considered. The efficiency of the isolation system is investigated by analyzing the effects of various parameters such as; (i) isolation period, (ii) tank aspect ratio and (iii) coefficient of friction. The Haroun and Housner's three-degrees-of-freedom lumped mass model was used to solve the governing equations of motion in which convective, impulsive and rigid masses were included. A number of selected ground motions were considered and the results were compared to those of non-isolated cases.As a result, base isolation was found to be effective in reducing the base shear values for both broad and slender tanks without significantly affecting the sloshing displacements of the broad ones. The efficiency was even more pronounced for slender tanks subjected to near fault ground motions for isolation periods above 3 s. This specific value of isolation period also eliminated possible design problems arising from under-estimation of base shear values (up to 40%) due to ignoring the effects of axial load variation in lower isolation periods. Overturning effects should not be ignored especially for tanks with high aspect ratios (S) and being subjected to near fault ground motion.  相似文献   

Reconstruction of past climates from stable isotope records of palaeo-precipitation preserved in continental archives     

K. ROZANSKI  S. J. JOHNSEN  U. SCHOTTERER  L. G. THOMPSON 《水文科学杂志》2013,58(5):725-745

Abstract

The potential of stable isotope ratios (²H/¹H and ¹⁸O/¹⁶0) of water as a modern tool for palaeoclimatic reconstructions on continents is reviewed. Examples of stable isotope records of palaeo-precipitation preserved in various continental archives (polar ice sheets, mid- and low latitude glaciers, lacustrine deposits, groundwater) are presented, and the methodology of their interpretation in terms of climatic changes is briefly discussed. To interpret quantitatively the isotope records preserved in continental archives, the response of the isotopic composition of precipitation to long-term fluctuations of key climatic parameters (temperature, precipitation amount, relative humidity) over the given area should be known. Further, the transfer functions relating the climate-induced changes of the isotopic composition of precipitation to the isotope record preserved in the given archive should be established. Since the isotopic composition of precipitation has been monitored only for the past three decades, alternatives ways of assessing the long-term climatic sensitivity of the isotopic signature of precipitation are being investigated. The isotope composition of precipitation should be viewed not only as a powerful proxy climatic indicator but also as an additional hydrometeorological parameter which should be explored as a diagnostic tool for the modelling of climate-induced changes in the water cycle, both on a regional and a global scale.  相似文献