Influence of the zone of weakness on dip angle and shear heating of subducted slabs     

Martin Kuka?ka  Ctirad Matyska 《Physics of the Earth and Planetary Interiors》2004,141(4):243-252

We study the importance of the zones of weakness and the pattern of downgoing flow in steady-state models of subducting lithosphere, which interacts mechanically and thermally with the ambient mantle. The non-linear system of governing equations consists of (i) the momentum equation in stream function formulation and (ii) the steady-state heat transfer equation including conduction and advection of heat and dissipation. A finite element method has been applied to this system. We consider the viscosity to be a non-linear function of both the temperature and the stream function. In steady-state two-dimensional (2D) flow, the stream function isolines follow material trajectories. They are used to follow the top of the subducting slab, which because of its possible increase in water content, is assumed to have a lower viscosity. The zone of weakness has been thus obtained in the self-consistent fashion since the stream function as well as the temperature are the output from our modeling and no a priori assumptions about the shape of the bending lithosphere are taken into account. It was shown that several orders decrease of viscosity in the zone of weakness is required to obtain the dip angle of about 45°. If the decrease of viscosity is not sufficient enough, the subducted slab either sinks almost vertically or does not exhibit a plate-like behavior. We have also demonstrated that shear heating can unrealistically increase at the zone of weakness for fast subductions if decrease of viscosity is underestimated.  相似文献   

A Modeling Study of the Effects of Anomalous Snow Cover over the Tibetan Plateau upon the South Asian Summer Monsoon   总被引：1，自引：0，他引：1  

刘华强  孙照渤王举 闵锦忠 《大气科学进展》2004,21(6):964-975

The effect of anomalous snow cover over the Tibetan Plateau upon the South Asian summer monsoon is investigated by numerical simulations using the NCAR regional climate model (RegCM2) into which gravity wave drag has been introduced. The simulations adopt relatively realistic snow mass forcings based on Scanning Multi-channel Microwave Radiometer (SNINIR) pentad snow depth data. The physical mechanism and spatial structure of the sensitivity of the South Asian early summer monsoon to snow cover anomaly over the Tibetan Plateau are revealed. The main results are summarized as follows. The heavier than normal snow cover over the Plateau can obviously reduce the shortwave radiation absorbed by surface through the albedo effect, which is compensated by weaker upward sensible heat flux associated with colder surface temperature, whereas the effects of snow melting and evaporation are relatively smaller.The anomalies of surface heat fluxes can last until June and become unobvious in July. The decrease of the Plateau surface temperature caused by heavier snow cover reaches its maximum value from late April to early May. The atmospheric cooling in the mid-upper troposphere over the Plateau and its surrounding areas is most obvious in May and can keep a fairly strong intensity in June. In contrast, there is warming to the south of the Plateau in the mid-lower troposphere from April to June with a maximum value in May.The heavier snow cover over the Plateau can reduce the intensity of the South Asian summer monsoon and rainfall to some extent, but this influence is only obvious in early summer and almost disappears in later stages.  相似文献   

Tetrahedral Plots of the Phase Relations for Basalts     

Sven Maal?e  Richard N. Abbott Jr. 《Mathematical Geology》2005,37(8):869-893

The phase relations of quaternary systems are generally represented by projections onto ternary compositional planes. Such projections often obscure relationships that would only be evident in a three-dimensional tetrahedral plot. The tetrahedral plot requires that compositions of the minerals and melts be transformed into Cartesian coordinates. It is shown here how this transformation is carried out. The application is demonstrated by tetrahedral plots of experimental melt compositions of partially molten lherzolite. Furthermore, the plot can be used to evaluate whether or not a particular basaltic composition represents a primary melt. The methods are applicable to any four-component system.  相似文献   

Towards the establishment of a reliable proxy for the reactive surface area of smectite     

Volker Metz  Hadas Raanan  Dirk Bosbach 《Geochimica et cosmochimica acta》2005,69(10):2581-2591

Reactive surface area is one of the key parameters for studying the kinetics of mineral dissolution. The common practice in experimental kinetics is to normalize the dissolution rate to the surface area measured by the BET method. The relationship between BET surface area and the reactive surface area is not trivial in minerals such as smectites, which possess both internal and external surface areas, and in which the dissolution is controlled by the chemical attack on the edge surface. The present study examines two proxies for the reactive surface area of the Clay Mineral Society reference smectite SAz-1: BET surface area and the edge surface area measured using AFM.Since smectites are very microporous, their BET surface area is strongly influenced by the degassing procedure. It is demonstrated that outgassing the smectite powder at 135°C in a 15 mL min⁻¹ N₂ gas flow for at least 24 hours minimizes contribution from micropores to less than 11% of the BET surface area.Following dissolution experiments in solutions with a low electrolyte concentration, the BET surface area increased from 34 ± 2 m² g⁻¹ in raw SAz-1 to 127 ± 13 m² g⁻¹ in SAz-1 sample recovered from dissolution experiments. This increase in BET surface area is explained by a decrease in the average size of the smectite aggregates, and by an increase in microporosity due to the depletion in the major interlayer cation, i.e., Ca²⁺. As the BET surface area of the raw smectite sample includes considerably less microporosity compared to the BET surface area of the smectite recovered from dissolution experiments, the former is a better approximation of the external surface area of the dried sample powder.AFM measurements show that there is no correlation between the specific external surface area of the sample and its specific edge surface area. This observation is explained by the platy morphology of the smectite particle in which the specific external surface area depends linearly on the height reciprocal, whereas the specific edge surface area is independent of the particles height and depends linearly on the sum of the reciprocals of the length of the axes. Therefore, there is no reason to expect a correlation between the BET and the edge surface area. Our results show that the edge surface area (4.9 ± 0.7 m² g⁻¹) of the smectite particles cannot be predicted based on its external surface area (136 ± 20 m² g⁻¹). Therefore, the BET surface area cannot serve as a proxy for the reactive surface area. We suggest using AFM measurements of the specific edge surface area as an alternative proxy for the reactive surface area of smectite.  相似文献   

Vegetation and climate changes in northwestern Russia during the Lateglacial and Holocene inferred from the Lake Ladoga pollen record     

Larisa A. Savelieva  Andrei A. Andreev  Raphael Gromig  Dmitry A. Subetto  Grigory B. Fedorov  Volker Wennrich  Bernd Wagner  Martin Melles 《Boreas: An International Journal of Quaternary Research》2019,48(2):349-360

The new pollen record from the upper 12.75 m of a sediment core obtained in Lake Ladoga documents regional vegetation and climate changes in northwestern Russia over the last 13.9 cal. ka. The Lateglacial chronostratigraphy is based on varve chronology, while the Holocene stratigraphy is based on AMS ¹⁴C and OSL dates, supported by comparison with regional pollen records. During the Lateglacial (c. 13.9–11.2 cal. ka BP), the Lake Ladoga region experienced several climatic fluctuations as reflected in vegetation changes. Shrub and grass communities dominated between c. 13.9 and 13.2 cal. ka BP. The increase in Picea pollen at c. 13.2 cal. ka BP probably reflects the appearance of spruce in the southern Ladoga region at the beginning of the Allerød interstadial. After c. 12.6 cal. ka BP, the Younger Dryas cooling caused a significant decrease in spruce and increase in Artemisia with other herbs, indicative of tundra‐ and steppe‐like vegetation. A sharp transition from tundra‐steppe habitats to sparse birch forests characterizes the onset of Holocene warming c. 11.2 cal. ka BP. Pine forests dominated in the region from c. 9.0 to 8.1 cal. ka BP. The most favourable climatic conditions for deciduous broad‐leaved taxa existed between c. 8.1 and 5.5 cal. ka BP. Alder experiences an abrupt increase in the local vegetation c. 7.8 cal. ka BP. The decrease in tree pollen taxa (especially Picea) and the increase in herbs (mainly Poaceae) probably reflect human activity during the last 2.2 cal. ka. Pine forests have dominated the region since that time. Secale and other Cerealia pollen as well as ruderal herbs are permanently recorded since c. 0.8 cal. ka BP.  相似文献   

Turbulent Humidity Fluctuations in the Convective Boundary Layer: Case Studies Using Water Vapour Differential Absorption Lidar Measurements     

Shravan Kumar Muppa  Andreas Behrendt  Florian Späth  Volker Wulfmeyer  Simon Metzendorf  Andrea Riede 《Boundary-Layer Meteorology》2016,158(1):43-66

  相似文献   

Spatially controlled Fe and Si isotope variations: an alternative view on the formation of the Torres del Paine pluton     

Norbert?A.?GajosEmail author  Craig?C.?Lundstrom  Alexander?H.?Taylor 《Contributions to Mineralogy and Petrology》2016,171(11):93

We present new Fe and Si isotope ratio data for the Torres del Paine igneous complex in southern Chile. The multi-composition pluton consists of an approximately 1 km vertical exposure of homogenous granite overlying a contemporaneous 250-m-thick mafic gabbro suite. This first-of-its-kind spatially dependent Fe and Si isotope investigation of a convergent margin-related pluton aims to understand the nature of granite and silicic igneous rock formation. Results collected by MC-ICP-MS show a trend of increasing δ⁵⁶Fe and δ³⁰Si with increasing silica content as well as a systematic increase in δ⁵⁶Fe away from the mafic base of the pluton. The marginal Torres del Paine granites have heavier Fe isotope signatures (δ⁵⁶Fe = +0.25 ± 0.02 2se) compared to granites found in the interior pluton (δ⁵⁶Fe = +0.17 ± 0.02 2se). Cerro Toro country rock values are isotopically light in both Fe and Si isotopic systems (δ⁵⁶Fe = +0.05 ± 0.02 ‰; δ³⁰Si = ?0.38 ± 0.07 ‰). The variations in the Fe and Si isotopic data cannot be accounted for by local assimilation of the wall rocks, in situ fractional crystallization, late-stage fluid exsolution or some combination of these processes. Instead, we conclude that thermal diffusion or source magma variation is the most likely process producing Fe isotope ratio variations in the Torres del Paine pluton.  相似文献   

封面及目录     

本刊编辑部 《岩矿测试》2016,35(4):I-IV

  相似文献   

Biogenic volatile compound emissions from a temperate forest,China: model simulation     

Jianhui?BaiEmail author  Tiffany?Duhl  Nan?Hao 《Journal of Atmospheric Chemistry》2016,73(1):29-59

Emissions of biogenic volatile organic compounds (BVOC) were measured using a relaxed eddy accumulation (REA) technique on an above-canopy tower in a temperate forest (Changbai Mountain, Jilin province, China) during the 2010 and 2011 summer seasons. Solar global radiation and photosynthetically active radiation (PAR) were also measured. Based on PAR energy dynamic balance, an empirical BVOC emission and PAR transfer model was developed that includes the processes of BVOC emissions and PAR transfer above the canopy level, including PAR absorption and consumption, and scattering by gases, liquids, and particles (GLPs). Simulated emissions of isoprene and monoterpenes were in agreement with observations. The averages of the relative estimator biases for the flux were 39.3 % for isoprene, and 27.1 % for monoterpenes in the 2010 and 2011 growing seasons, with NMSE (normalized mean square error) values of 0.133 and 0.101, respectively. The observed and simulated mean diurnal variations of isoprene and monoterpenes in the 2010 and 2011 growing seasons were evaluated for the validation of the empirical model. Under observed atmospheric conditions, the sensitivity analysis showed that emissions of isoprene and monoterpenes were more sensitive to changes in PAR than to water vapor content or to the magnitude of the scattering factor. The emissions of isoprene and monoterpenes in the 2010 and 2011 growing seasons (from June to September) were estimated using this empirical model along with hourly observational data, with mean hourly emissions of 1.71 and 1.55 mg m^?2 h^?1 for isoprene, and 0.48 and 0.47 mg m^?2 h^?1 for monoterpenes in 2010 and 2011, respectively. As formaldehyde (HCHO) is considered as the main oxidation product of isoprene and monoterpenes, it is necessary to investigate the link between HCHO and BVOC emissions. GOME-2 HCHO vertical column densities (VCDs) can be used to estimate BVOC emission fluxes in the Changbai Mountain temperate forest.  相似文献   

Initiation of large-volume silicic centers in the Yellowstone hotspot track: insights from H<Subscript>2</Subscript>O- and F-rich quartz-hosted rhyolitic melt inclusions in the Arbon Valley Tuff of the Snake River Plain     

Dana?L.?DrewEmail author  Ilya?N.?Bindeman  Matthew?W.?Loewen  Paul?J.?Wallace 《Contributions to Mineralogy and Petrology》2016,171(1):10

During the onset of caldera cluster volcanism at a new location in the Snake River Plain (SRP), there is an increase in basalt fluxing into the crust and diverse silicic volcanic products are generated. The SRP contains abundant and compositionally diverse hot, dry, and often low-δ¹⁸O silicic volcanic rocks produced through time during the formation of individual caldera clusters, but more H₂O-rich eruptive products are rare. We report analyses of quartz-hosted melt inclusions from pumice clasts from the upper and lower Arbon Valley Tuff (AVT) to gain insight into the initiation of caldera cluster volcanism. The AVT, a voluminous, caldera-forming rhyolite, represents the commencement of volcanism (10.44 Ma) at the Picabo volcanic field of the Yellowstone hotspot track. This is a normal δ¹⁸O rhyolite consisting of early and late erupted members (lower and upper AVT, respectively) with extremely radiogenic Sr isotopes and unradiogenic Nd isotopes, requiring that ~50 % of the mass of these elements is derived from melts of Archean upper crust. Our data reveal distinctive features of the early erupted lower AVT melt including: variable F concentrations up to 1.4 wt%, homogenous and low Cl concentrations (~0.08 wt%), H₂O contents ranging from 2.3 to 6.4 wt%, CO₂ contents ranging from 79 to 410 ppm, and enrichment of incompatible elements compared to the late erupted AVT, subsequent Picabo rhyolites, SRP rhyolites, and melt inclusions from other metaluminous rhyolites (e.g., Bishop Tuff, Mesa Falls Tuff). We couple melt inclusion data with Ti measurements and cathodoluminescence (CL) imaging of the host quartz phenocrysts to elucidate the petrogenetic evolution of the AVT rhyolitic magma. We observe complex and multistage CL zoning patterns, the most critical being multiple truncations indicative of several dissolution–reprecipitation episodes with bright CL cores (higher Ti) and occasional bright CL rims (higher Ti). We interpret the high H₂O, F, F/Cl, and incompatible trace element concentrations in the context of a model involving melting of Archean crust and mixing of the crustal melt with basaltic differentiates, followed by multiple stages of fractional crystallization, remelting, and melt extraction. This multistage process, which we refer to as distillation, is further supported by the complex CL zoning patterns in quartz. We interpret new Δ¹⁸O(Qz-Mt) isotope measurements, demonstrating a 0.4 ‰ or ~180 °C temperature difference, and strong Sr isotopic and chemical differences between the upper and lower AVT to represent two separate eruptions. Similarities between the AVT and the first caldera-forming eruptions of other caldera clusters in the SRP (Yellowstone, Heise and Bruneau Jarbidge) suggest that the more evolved, lower-temperature, more H₂O-rich rhyolites of the SRP are important in the initiation of a caldera cluster during the onset of plume impingement.  相似文献