多因素模糊综合评价预测油气田远景区的研究          下载免费PDF全文

戴联其  王家映 《地球科学》1995,20(5):589-593

在ＧＩＳ支持下，本文设计了“分层建模，逐层评价，综合预测”的新思路，新方法，研究和建立了物、化探数字异常模型、多因素直接加权模型，多因素模糊综合评价预测模型。这对全面揭示各种异常分布特征与隐伏油气田和地质构造的，对指导生产、辅决策、确定油气田远景提供了很有前景的手段。  相似文献   

试论胶东金成矿区成矿物质条件   总被引：9，自引：1，他引：9  

肖武权  戴塔根 《地质与勘探》1995,31(4):7-13

对胶东群、粉子山群和蓬莱群的岩石学、地球化学等特征研究认为，胶东群是金的主要矿源层；粉子山群和煌斑岩脉也提供了部分金的来源。花岗质岩浆活动促使成矿物质转移。  相似文献   

龙门山冲断带的隆升和川西前陆盆地的沉降   总被引：69，自引：11，他引：69       下载免费PDF全文

刘树根 Demis.  A 《地质学报》1995,69(3):204-214

通过龙门山区和川西前陆盆地岩石样品的裂变径迹和镜质体反射率的测定和计算机模拟得出：１）松潘－甘孜褶皱带１０Ｍａ以来至少隆升了３－４ｋｍ，隆升速率最低为０．３－０．４ｍｍ／ａ；（２）龙门山逆冲推覆构造带１０Ｍａ以来至少隆升了５－６ｋｍ，隆升速率最低为０．０１６－０．０３２ｍｍ／ａ；（４）川西前陆盆地６０Ｍａ以来降升１－２ｋｍ，降升速率为０．０２８－０．０５ｍｍ／ａ；（５）１０Ｍａ以来北川－映秀－小关  相似文献   

甘肃“5·5"黑风暴小波分析   总被引：8，自引：2，他引：8  

戴新刚  丑纪范  朱姝 《气象》1995,21(2):10-15

用小波变换理论对１９９３年春季甘肃省河西走廊地区一场特大黑风暴进行了分析。结果表明，小波分析能比较客观地将时间序列中不同时间尺度的振动分离开，使我们能清楚地看到黑风暴中的中尺度扰动。  相似文献   

随机地震模型及反应谱分析   总被引：2，自引：0，他引：2  

戴湘和  张宪宏 《地震工程与工程振动》1995,15(2):118-127

本文以实际地震加速度的频谱特性和相位谱特性为依据，仿概率统计理论中的高斯概率密度函数，建立了随机地震加速度频数学模型。  相似文献   

Collision and thermal history of Indian-Sundaland-Eurasian plates as implicated by40Ar/39Ar age spectra of granodiorites     

Dai Tongmo  Zhu Bingquan  Zhang Yuquan  Pu Zhiping  Zhang Qianfeng  Hong Ashi 《中国地球化学学报》1987,6(1):33-43

⁴⁰Ar/³⁹Ar plateau ages of biotite, plagioclase, K-feldspar and hornblende from the Biluoxueshan and Lincang plutons in the three-river area of Yunnan and the Quxu pluton in the Gandise belt of Xizang indicate that the three plutons were emplaced at 420, 234 and 43.4 Ma, respectively. Based on the study of closure temperatures and thermal histories, it is shown that the Lincang and Biluoxueshan plutons experienced the same thermodynamic event during 85–90 Ma, temporally representing the collision between the Sundaland and Eurasian plates, and that the Quxu pluton was uplifted at a much faster rate during 40–44 Ma(2.6 mm/a), marking the collision between the Indian and Eurasian plates.  相似文献   

填充墙与钢框架协同工作性能非线性分析   总被引：5，自引：2，他引：5  

戴绍斌  余欢  黄俊 《地震工程与工程振动》2005,25(3):24-28

在试验研究的基础上，运用ANSYS有限元中的接触单元建模，对加气混凝土填充墙钢框架的结构性能进行了研究，同时与纯钢框架结构在强度、刚度、以及延性等方面进行了对比分析，结果表明：填充墙与钢框架协同工作能够改善钢框架结构的受力性能和抗震能力，这为钢结构及其围护体系的研究与推广应用提供了一定的理论依据。  相似文献   

泾阳4.8级地震前后重力变化探析   总被引：2，自引：0，他引：2  

高好林  孙兵林  戴王强 《地震地磁观测与研究》2005,26(2):82-88

系统分析了泾阳Ms4．8地震前后陕西关中地区流动重力观测资料，探讨了重力场的时空变化及其映震特征。结果表明：①震前在震中区附近形成较显著地重力负异常区，且与沉降区基本吻合。②泾阳地震震中区既是重力变化梯度带，也是重力异常的正值区到负值区的过度带。③由于震源区应力作用方式是以水平为主的左旋走滑运动，震前局部重力异常不显著。  相似文献   

地震快速数据发布系统     

梁建宏  刘瑞丰  代光辉  邹立晔  杨辉 《地震地磁观测与研究》2005,26(6):77-80

利用成熟的、性能优异的GMT和SAC作为后台处理软件，并辅以MySQL数据库系统来管理数据。实现了地震快速数据的自动、及时发布。  相似文献   

Converted-wave imaging in anisotropic media: theory and case studies   总被引：1，自引：0，他引：1  

Xiang-Yang Li  Hengchang Dai  Fabio Mancini 《Geophysical Prospecting》2007,55(3):345-363

Common‐conversion‐point binning associated with converted‐wave (C‐wave) processing complicates the task of parameter estimation, especially in anisotropic media. To overcome this problem, we derive new expressions for converted‐wave prestack time migration (PSTM) in anisotropic media and illustrate their applications using both 2D and 3D data examples. The converted‐wave kinematic response in inhomogeneous media with vertical transverse isotropy is separated into two parts: the response in horizontally layered vertical transverse isotrophy media and the response from a point‐scatterer. The former controls the stacking process and the latter controls the process of PSTM. The C‐wave traveltime in horizontally layered vertical transverse isotrophy media is determined by four parameters: the C‐wave stacking velocity V_C2, the vertical and effective velocity ratios γ₀ and γ_eff, and the C‐wave anisotropic parameter χ_eff. These four parameters are referred to as the C‐wave stacking velocity model. In contrast, the C‐wave diffraction time from a point‐scatterer is determined by five parameters: γ₀, V_P2, V_S2, η_eff and ζ_eff, where η_eff and ζ_eff are, respectively, the P‐ and S‐wave anisotropic parameters, and V_P2 and V_S2 are the corresponding stacking velocities. V_P2, V_S2, η_eff and ζ_eff are referred to as the C‐wave PSTM velocity model. There is a one‐to‐one analytical link between the stacking velocity model and the PSTM velocity model. There is also a simple analytical link between the C‐wave stacking velocities V_C2 and the migration velocity V_Cmig, which is in turn linked to V_P2 and V_S2. Based on the above, we have developed an interactive processing scheme to build the stacking and PSTM velocity models and to perform 2D and 3D C‐wave anisotropic PSTM. Real data applications show that the PSTM scheme substantially improves the quality of C‐wave imaging compared with the dip‐moveout scheme, and these improvements have been confirmed by drilling.  相似文献