A New Titanosauriform Sauropod from the Early Late Cretaceous of Dongyang, Zhejiang Province     

Lü Junchang  Yoichi Azum  Chen Rongjun  Zheng Wenjie  Jin Xingsheng 《《地质学报》英文版》2008,82(2):225-235

A new titanosauriform sauropod Dongyangosaurus sinensis gen. et sp. nov. from the early Late Cretaceous of Dongyang County, Zhejiang Province, is erected based on a partial postcranial skeleton. It is characterized by complex laminae on the lateral surface of the neural spines and postzygapophyses of dorsal vertebrae, a distinct fossa on the ventral surfaces of the prezygapophyses of dorsal vertebrae, distinct fossae are also present on the lateral surface of the postzygapophysis of anterior caudal vertebrae; pubis is shorter than ischium, the small obturator foramen of pubis elongated, and nearly closed. The lamina complexity of dorsal vertebrae in Dongyangosaurus indicates that a higher diversity of titanosauriformes occurred during the early Late Cretaceous in China.  相似文献   

航空激光雷达用于森林测量的数据处理方法研究     

刘琪璟  沼田洋一  金田真一 《遥感学报》2008,12(1):104-110

航空激光雷达是最近十几年开发的最新测量技术.利用激光扫描器所获得的高度数据可以建立精密的地形模型,同时可以获得森林生产力的信息.无论是地形测量还是植被估算,在数据处理时都需要将来自地表和植被的信号分离开,即滤波.数据滤波的方法很多,但是都不成熟,而且处于技术保密状态.本文介绍目前主要的信号分类方法,并开发了动态阈值分离法.该方法以森林为解析对象,通过反复运算逐渐逼近,完成地表和植被的分离,从而实现了地形与森林测量的双重目的.通过引入地形因子把原地形转换为理想平地,大大减少了过度滤波或者滤波不充分的情况.本方法基本实现自动处理,容易操作.利用本方法计算的高度误差(均方差,RMS)为0.4-0.5m.本方法还适用于城市地区高程模型的建立.  相似文献   

A simple approach to the high-redshift sub-millimeter galaxies     

Tamon Suwa  Hiroyuki Hirashita  Yoichi Tamura 《Astrophysics and Space Science》2010,330(2):219-226

We aim at understanding the statistical properties of luminous sub-millimeter (submm) galaxies (SMGs) in the context of cosmological structure formation. By utilizing a cosmological N-body simulation to calculate the distribution of dark halos in the Universe, we consider the dust enrichment in individual halos by Type II supernovae (SNe II). The SN II rate is estimated under a star formation activity which is assumed to occur on a dynamical timescale in the dark matter potential. Our simple framework successfully explains the luminosity function, the typical star formation rate, and the typical dust mass of an observational SMG sample at z～3. We also examine the clustering properties of SMGs, since a positive cross correlation between SMGs and Lyα emitters (LAEs) is indeed observed by a recent observation. In the simulation, we select SMGs by FIR dust luminosity >10¹² L _⊙, while LAEs are chosen such that the age and the virial mass are consistent with the observed LAE properties. The SMGs and LAEs selected in this way show a spatial cross correlation whose strength is consistent with the observation. This confirms that the SMGs really trace the most clustered regions at z～3 and that their luminosities can be explained by the dust accumulation as a result of their star formation activities. We extend our prediction to higher redshifts, finding that a statistical sample of submm galaxies at z≥6 can be obtained by ALMA with a 100 arcmin² survey. With the same survey, a few submm galaxies at z～10 may be detected.  相似文献   

An integrated model simulating the initiation and motion of earthquake and rain induced rapid landslides and its application to the 2006 Leyte landslide   总被引：10，自引：7，他引：3  

Kyoji?SassaEmail author  Osamu?Nagai  Renato?Solidum  Yoichi?Yamazaki  Hidemasa?Ohta 《Landslides》2010,7(3):219-236

A gigantic rapid landslide claiming over 1,000 fatalities was triggered by rainfalls and a small nearby earthquake in the Leyte Island, Philippines in 2006. The disaster presented the necessity of a new modeling technology for disaster risk preparedness which simulates initiation and motion. This paper presents a new computer simulation integrating the initiation process triggered by rainfalls and/or earthquakes and the development process to a rapid motion due to strength reduction and the entrainment of deposits in the runout path. This simulation model LS-RAPID was developed from the geotechnical model for the motion of landslides (Sassa 1988) and its improved simulation model (Sassa et al. 2004b) and new knowledge obtained from a new dynamic loading ring shear apparatus (Sassa et al. 2004a). The examination of performance of each process in a simple imaginary slope addressed that the simulation model well simulated the process of progressive failure, and development to a rapid landslide. The initiation process was compared to conventional limit equilibrium stability analyses by changing pore pressure ratio. The simulation model started to move in a smaller pore pressure ratio than the limit equilibrium stability analyses because of progressive failure. However, when a larger shear deformation is set as the threshold for the start of strength reduction, the onset of landslide motion by the simulation agrees with the cases where the factor of safety estimated by the limit equilibrium stability analyses equals to a unity. The field investigation and the undrained dynamic loading ring shear tests on the 2006 Leyte landslide suggested that this landslide was triggered by the combined effect of pore water pressure due to rains and a very small earthquake. The application of this simulation model could well reproduce the initiation and the rapid long runout motion of the Leyte landslide.  相似文献   

Gravity measurements with a portable absolute gravimeter A10 in Syowa Station and Langhovde,East Antarctica     

Takahito Kazama  Hideaki Hayakawa  Toshihiro Higashi  Shingo Ohsono  Shunsuke Iwanami  Tomoko Hanyu  Harumi Ohta  Koichiro Doi  Yuichi Aoyama  Yoichi Fukuda  Jun Nishijima  Kazuo Shibuya 《Polar Science》2013,7(3-4):260-277

Absolute gravity values were measured with a portable absolute gravimeter A10 in East Antarctica, for the first time by the Japanese Antarctic Research Expedition. This study aims to investigate regional spatiotemporal variations of ice mass distributions and associated crustal deformations around Syowa Station by means of repeated absolute gravity measurements, and we obtained the first absolute gravity value in Southern Langhovde on the Antarctic Continent. The average absolute gravity value at the newly installed benchmark AGS01 in Langhovde (obtained on 3 February 2012) was 982535584.2 ± 0.7 μgal (1 [μgal] = 1 × 10^?8 [m/s²]), which was in agreement with the gravity values obtained by the past relative gravity measurements within 1 mgal. In addition, the average absolute gravity value obtained at AGSaux in Syowa Station was consistent with both previous absolute gravity values and those obtained by simultaneous measurements using an FG5 gravimeter, owing to adequate data corrections associated with tidal effects and time variations in atomic clock frequencies. In order to detect the gravity changes associated with the ice mass changes and other tectonic phenomena, we plan to conduct absolute gravity measurements at AGS01 again and at other campaign sites around Syowa Station as well in the near future, with careful attention paid to the impacts of severe environmental conditions in Antarctica on gravity data collection.  相似文献   

On the Influence of Sea Surface Height Variability on Satellite Altimeter Derived Gravity     

Leni Sophia Heliani  Yoichi Fukuda 《Marine Geodesy》2001,24(2):73-84

The effect of sea surface height (SSH) variability is one of the primary factors that limit the accuracy and resolution of altimeter-derived gravity values. We propose a method to estimate the influence of variation of the sea surface height on the accuracy of satellite-derived gravity by simulation technique, with a case study around Indonesian waters. Wederived an Indonesian marine gravity map using the Geosat-geodetic mission (GM). Since most of the area studied is located around coastal and shallow areas, the measurement of SSH of this area is less accurate. To obtain a distribution of SSH variability over the study area, Topex/Poseidon (T/P) data were first processed and assessed. Processing 52 cycles of the Topex/Poseidon data, the root mean square (RMS) of SSH variability for each cycle was found to vary from 1 to 179 cm. Further, for the purpose of estimating the accuracy of altimeter-derived gravity, we derived several levels of Gaussian noise, computed simulation data by adding the Gaussian noise to Geosat data, and determined simulated gravity maps. Based on the distribution of RMS values from T/P data and standard deviation (STD) differences between the simulated and the original gravity maps, we estimated the accuracy of the gravity map. Around Indonesian waters, the accuracy of the gravity map influenced by SSH variation was estimated to be within the range 0.8~93 mgal.  相似文献   

Variance Component Estimation in Linear Inverse Ill-posed Models   总被引：2，自引：4，他引：2  

Peiliang Xu  Yunzhong Shen  Yoichi Fukuda  Yumei Liu 《Journal of Geodesy》2006,80(2):69-81

Regularization has been applied by implicitly assuming that the weight matrix of measurements is known. If measurements are assumed to be heteroscedastic with different unknown variance components, all regularization techniques may not be proper to apply, unless techniques of variance component estimation are directly implemented. Although variance component estimation techniques have been proposed to simultaneously estimate the variance components and provide a means of regularization, the regularization parameter is treated as if it were also an extra variance component. In this paper, we assume no prior information on the model parameters and do not treat the regularization parameter as an extra variance component. Instead, we first analyze the biases of estimated variance components due to the regularization parameter and then propose bias-corrected variance component estimators. The results have shown that they work very well. Finally, we propose and investigate through simulations an iterative scheme to simultaneously estimate the variance components and the regularization parameter, in order to eliminate the effect of regularization parameter on variance components and the effect of incorrect prior weights or initial variance components on the regularization parameter.  相似文献   

Geochemical Features of Vein Anhydrite from the Kakkonda Geothermal System, Northeast Japan     

Munetake Sasaki    Koichiro Fujimoto    Hitoshi Tsukamoto    Takayuki Sawaki    Masakatsu Sasada    Masanori Kurosawa  Masahiko Yagi    Yoichi Muramatsu    Osamu Kato  +  Ryo Komatsu  +  Kaichiro Kasai  + Nobuo Doi+ 《Resource Geology》2003,53(2):127-142

Abstract. Cathodoluminescence (CL) color, rare earth element (REE) content, sulfur and oxygen isotopes and fluid inclusions of anhydrite, which frequently filled in hydrothermal veins in the Kakkonda geothermal system, were investigated to elucidate the spatial, temporal and genetical evolution of fluids in the deep reservoir. The anhydrite samples studied are classified into four types based on CL colors and REE contents: type-N (no color), type-G (green color), type-T (tan color) and type-S (tan color with a high REE content). In the shallow reservoir, only type-N anhydrite is observed. In the deep reservoir, type-G anhydrite occurs in vertical veins whereas type-T and -N in lateral veins. Type-S anhydrite occurs in the heat-source Kakkonda Granite. The CL textures revealed that type-G anhydrite deposited earlier than type-T in the deep reservoir, implying that fracture system was changed from predominantly vertical to lateral.
Studies of fluid inclusions and δ³⁴S and δ¹⁸O values of the samples indicate that type-N anhydrite deposited from diluted fluids derived from meteoric water, whereas type-G, -T and -S anhydrites deposited from magmatic brines derived from the Kakkonda Granite with the exception of some of type-G with recrystallization texture and no primary fluid inclusion, which deposited from fossil seawater preserved in the sedimentary rocks. Type-G, -T and -S anhydrites exhibit remarkably different chondrite-normalized REE patterns with a positive Eu anomaly, with a convex shape (peak at Sm or Eu) and with a negative Eu anomaly, respectively. The difference in the patterns might result from the different extent of hydrothermal alteration of the reservoir rocks and contribution of the magmatic fluids.  相似文献   

Benthic ecosystem development in an artificial tidal flat constructed from dredged spoil     

Ishii R  Nakano Y  Nakai S  Nishijima W  Okada M 《Marine pollution bulletin》2008,56(12):2059-2066

Dredged spoil (DS) was used as a silt and clay additive in the construction of artificial tidal flats from mountain sand (MS). As the ratio of DS in the sediment media increased, the number of emerging macrobenthos increased. The composition of the macrobenthic community was also affected by the addition of DS, and the changes might be dependent on the ratio of DS to MS. In addition, the macrobenthos in the artificial tidal flats was more abundant than that in the control tidal flat, which was constructed with natural tidal flat sediment. With a silt and clay content of 25%, polychaetes Ceratonereis erythraeensis and Capitella sp. and the gastropod Batillaria cumingii were dominant, whereas no bivalves were present. With less silt and clay (5% and 10%), the bivalves Ruditapes philippinarum and Musculista senhousia were observed in the artificial flats, while their numbers in the control tidal flat were lower.  相似文献   

Simultaneous Analysis of Natural Free Estrogens and Their Conjugates in Wastewater by GC‐MS     

Ze‐Hua Liu  Takeshi Hashimoto  Yoichi Okumura  Yoshinori Kanjo  Satoshi Mizutani 《洁净——土壤、空气、水》2010,38(2):181-188

A solid‐phase extraction (SPE)‐gas chromatography (GC)‐mass spectrometry (MS) analytical method was developed for the simultaneous analysis of natural free estrogens and their conjugates in wastewater samples. Natural free estrogens and their conjugates in wastewater were successfully separated by the oasis hydrophilic‐lipophilic balance solid phase extraction (Oasis HLB SPE) method, and the conjugates were initially enzyme hydrolyzed by β‐glucuronidase or arylsulfatase from Helix pomatia prior to derivatization. N‐methyl‐N‐(tert‐butyldimethylsilyl)trifluoroacetamide (MTBSTFA) plus 1% tert‐butyldimetheylchlorosilane (TBDMCS) was chosen as the derivatization reagent, and the most appropriate conditions of derivatization were determined to be at 95°C for 90 min. The recovery ratios of nine target chemicals were determined by spiking them in 1 L of ultra‐purified water or the influent of a wastewater treatment plant (WWTP). The recovery ratios of six out of nine for the analytes ranged from 73.3–114.9% with relative standard deviations (RSD) from 1.6–19.9%. The established method was successfully applied to environmental wastewater samples which were collected from one municipal wastewater treatment plant (WWTP) in Osaka, Japan, for the determination of natural free estrogens and their conjugates. In the influent sample, E1, E2, E1‐3S, E3‐3S, and E1‐3G were detected at concentrations of 16.6, 9.6, 8.2, 21.9, and 3.2 ng L^–1, respectively. However, only E1 was detected at a high concentration of 44 ng L^–1 in the effluent sample, suggesting that it is the dominant natural free estrogen in the effluent.  相似文献