Photoelectric lightcurve and period of rotation of the asteroid 182 Elsa     

A.W. Harris  J.W. Young  F. Scaltriti  V. Zappalà 《Icarus》1980,41(2):316-317

Photoelectric observations on five consecutive nights yield a period of rotation of 80 ± 2 hr with an amplitude of 0.7 magnitude for 182 Elsa, making it the longest period of rotation known to date. 182 Elsa is classed as an S object with a diameter of 48 km.  相似文献   

Asteroid rotation: III. 1978 Observations     

A.W. Harris  J.W. Young 《Icarus》1980,43(1):20-32

Photoelectric observations of 32 asteroids observed from Table Mountain Observatory during the second half of 1978 are reported. Rotation periods were obtained for most objects. Absolute magnitudes and phase functions were not determined for any of these asteroids. The geometric mean rotation period of the 32 asteroids observed is 14.2 ± 1.6 hr, as compared to 9.38 ± 0.35 hr for 182 asteroids analyzed in Paper I (A. W. Harris and J. A. Burns, 1979, Icarus 40, 115–144). We attribute this difference to an observational selection effect which favors detection of fast rotation, as discussed in Paper I. If this is true, then the present sample contains the reverse bias, since it is complete in that a period (in some cases very approximate) was obtained for each object observed, but fast rotators are underrepresented due to prior discovery of their rotation properties.  相似文献   

Vertical extent of zonal winds on Venus     

David Crisp  Andrew T. Young 《Icarus》1978,35(2):182-188

Possible interrelationships of different observations have been studied to clear up some obvious inconsistencies and develop a coherent picture of the kinematics of the Venus atmosphere. There is a wind shear in the vicinity of 60 km with vertical dimensions on the order of a scale height. The kinematical model has negligible surface winds, speeds increasing with altitude to approximately 45 km, a layer of high-speed retrograde zonal winds extending from approximately 45 to 60 km, a wind shear between 60 and 65 km, and slow atmospheric motions above this. Spacecraft data show that the region of high-speed winds is thicker on the day side of the planet than on the night side.  相似文献   

Rb-Sr and K-Ar systems of biotite in surface environments regulated by weathering processes with implications for isotopic dating and hydrological cycles of Sr isotopes     

Gi Young Jeong  Chang-Sik Cheong 《Geochimica et cosmochimica acta》2006,70(18):4734-4749

Biotite is widely used for Rb-Sr and K-Ar isotopic dating and influences Sr isotope geochemistry of hydrological regimes. The isotopic system of biotite behaves diversely in response to surface weathering; i.e. the complete preservation of original Rb-Sr and K-Ar isotopic ages or dramatic reduction. In this study, we have explored the relation between the behavior of isotopic systems and complex weathering processes of biotites in the weathering profiles distributed on the Mesozoic granitoids in South Korea. In the lower parts of the profiles, biotite in the early stages of weathering was transformed into either oxidized biotite or hydrobiotite, with a mass release of ⁸⁷Sr and ⁴⁰Ar forced by the rapid oxidation of ferrous iron. During the transformation to oxidized biotite, ⁸⁷Sr and ⁴⁰Ar were preferentially released relative to Rb and K, respectively, via solid-state diffusion through the biotite lattice, resulting in a drastic reduction of original isotopic age. The reduction of Rb-Sr age was greater than that of K-Ar age because K was preferentially released over Rb whereas ⁸⁷Sr and ⁴⁰Ar were released proportionally to each other. However, during the transformation of biotite to hydrobiotite (i.e., to regularly interstratified biotite-vermiculite), ⁸⁷Sr, Rb, ⁴⁰Ar, and K were completely retained in the alternating biotite interlayer, and thus the original isotopic age can be preserved. In the upper parts of the profiles, where iron oxidation was almost completed, ⁸⁷Sr, Rb, ⁴⁰Ar, and K were gradually and proportionally released, with no further significant change in isotopic age during the gradual transformation of the early-formed oxidized biotite into hydrobiotite and vermiculite or during their final decomposition to kaolinite. The ratios and amounts of isotopes released from weathered biotites are dependent upon the degree of iron oxidation and the pathways of mineralogical transformation. Regional and local variations in isotopic systems affected by particular weathering processes should be considered when dating biotite or biotite-bearing rocks in weathering environments, modeling the transfer of Sr isotopes to hydrologic regimes, and tracking the provenance of sediments.  相似文献   

Study on the kinetics of iron oxide leaching by oxalic acid   总被引：2，自引：0，他引：2  

Suong Oh Lee  Tam Tran  Yi Yong Park  Seong Jun Kim  Myong Jun Kim   《International Journal of Mineral Processing》2006,80(2-4):144-152

The presence of iron oxides in clay or silica raw materials is detrimental to the manufacturing of high quality ceramics. Although iron has been traditionally removed by physical mineral processing, acid washing has been tested as it is more effective, especially for extremely low iron (of less than 0.1% w/w). However, inorganic acids such as sulphuric or hydrochloric acids easily contaminate the clay products with SO₄²⁻ and Cl⁻, and therefore should be avoided as much as possible. On the other hand, if oxalic acid is used, any acid left behind will be destroyed during the firing of the ceramic products. The characteristics of dissolution of iron oxides were therefore investigated in this study.The dissolution of iron oxides in oxalic acid was found to be very slow at temperatures within the range 25–60 °C, but its rate increases rapidly above 90 °C. The dissolution rate also increases with increasing oxalate concentration at the constant pH values set within the optimum range of pH2.5–3.0. At this optimum pH, the dissolution of fine pure hematite (Fe₂O₃) (105–140 μm) follows a diffusion-controlled shrinking core model. The rate expression expressed as 1 − (2 / 3)x − (1 − x)^2 / 3 where x is a fraction of iron dissolution was found to be proportional to [oxalate]^1.5.The addition of magnetite to the leach liquor at 10% w/w hematite was found to enhance the dissolution rate dramatically. Such addition of magnetite allows coarser hematite in the range 0.5–1.4 mm to be leached at a reasonable rate.  相似文献   

Yeosu dinosaur track sites of Korea: The youngest dinosaur track records in Asia     

In Sung Paik  Min Huh  Kye Hun Park  Koo Geun Hwang  Kyung Sik Kim  Hyun Joo Kim 《Journal of Asian Earth Sciences》2006,28(4-6):457-468

Eighty two dinosaur trackways were newly discovered in Upper Cretaceous lacustrine deposits on islands in the vicinity of Yeosu, Korea. Most dinosaur tracks occur in marginal lake deposits with polygonal desiccation cracks. The dinosaur tracks at the Yeosu site include 65 ornithopod trackways, 16 theropod trackways and one sauropod trackway. The prevalence of ornithopod tracks and the limited occurrence of sauropod tracks at the Yeosu site evidently reflect decreased sauropod diversity in the Upper Cretaceous. All ornithopod trackways represent bipeds, and most of the ornithopod tracks are similar to Caririchnium from other sites of the Korean peninsula. All fossil wood specimens collected in the study area represent conifers (three species of cupressaceous and two species of taxodiaceous conifers, and a new species) except for one, which is a discotyledon. It is thus inferred that the southwestern part of the Korean Peninsula was primarily covered with mesic forests with taxodiaceous trees during the Late Cretaceous. The K–Ar age of the Yeosu tracksite is determined as 81–65 Ma (Camapnian to Maastrichtian). It indicates that the Yeosu track site contains the last records of dinosaurs living in Asia. Consequently, semi-arid palaeoclimatic conditions, together with a large lake as a persistent water source and rich vegetation of gymnosperm trees as food, resulted in the preservation of abundant dinosaur tracks in the Upper Cretaceous on the Korean Peninsula.  相似文献   

Structural similarity and variety at the tips in a wide range of strike–slip faults: a review     

Young‐Seog Kim  David J. Sanderson 《地学学报》2006,18(5):330-344

Strike–slip faults are often accompanied by a variety of structures, particularly at their tips. The zones of additional fracturing are classified as tip‐damage zones. These zones can be subdivided into several different damage patterns based on the nature and orientation of faults and fractures developed. Damage zones at the ends of small strike–slip faults (mode II tips) develop wing cracks, horsetail splays, antithetic faults, synthetic branch faults and solution surfaces. Similar tip‐damage patterns are also commonly observed at larger (regional) scales, but with a dominance of faulting over tensile cracks and solution surfaces. Wing cracks and horsetail splays developed at small‐scale faults are replaced by normal faults in large‐scale faults. Antithetic faults and synthetic branch faults are observed at small and large scales. Thrust faults are developed at large scales, in a similar pattern to solution surfaces at a small scale. All these structures may show slightly different angular relationships to the master fault at small and large scale, but develop in response similar stress distribution and mechanics around the fault. Thus, mode II tip‐damage zones show similar patterns over a wide range of fault scales.  相似文献   

Partial melting and P–T evolution of the Kodaikanal Metapelite Belt, southern India     

K. Sajeev  M. Santosh  H.S. Kim 《Lithos》2006,92(3-4):465-483

The Kodaikanal region of the Madurai Block in southern India exposes a segment of high-grade metamorphic rocks dominated by an aluminous garnet–cordierite–spinel–sillimanite–quartz migmatite suite, designated herein as the Kodaikanal Metapelite Belt (KMB). These rocks were subjected to extreme crustal metamorphism during the Late Neoproterozoic despite the lack of diagnostic ultrahigh-temperature assemblages. The rocks preserve microstructural evidence demonstrating initial-heating, dehydration melting to generate the peak metamorphic assemblage and later retrogression of the residual assemblages with remaining melt. The peak metamorphic assemblage is interpreted to be garnet + sillimanite + K-feldspar + spinel + Fe–Ti oxide + quartz + melt, which indicates pressure–temperature (P–T) conditions around 950–1000 °C and 7–8 kbar based on calculated phase diagrams. A clockwise P–T path is proposed by integrating microstructural information with pseudosections. We show that evidence for extreme crustal metamorphism at ultrahigh-temperature conditions can be extracted even in the cases where the rocks lack diagnostic ultrahigh-temperature mineral assemblages. Our approach confirms the widespread regional occurrence of UHT metamorphism in the Madurai Block during Gondwana assembly and point out the need for similar studies on adjacent continental fragments.  相似文献   

Deformation-induced garnet zoning   总被引：1，自引：0，他引：1  

Hyeong Soo Kim   《Gondwana Research》2006,10(3-4):379-388

Compositional zoning patterns in garnet porphyroblasts from kyanite-bearing samples of the Devonian Littleton Formation, north-central Massachusetts, reveal complex patterns of growth that are related to multiple deformation and metamorphic events. Garnet porphyroblasts exhibit asymmetrical and irregular zoning patterns in X_Mn, X_Ca and Fe/(Fe + Mg). Zoning reversals in Mn and Fe/(Fe + Mg) and patch distribution in Ca appear to occur around the boundaries of the textural zones. Also, the compositions of the garnet at the textural boundaries are variable for all traverses. These observations suggest that the garnet zoning was not only modified from diffusion processes, but was also influenced by pre-existing microfabrics through the effects of preferential dissolution and resorption in partial disequilibrium. Relationships between chemical and textural truncations indicate that the zoning patterns of garnet were strongly modified from preferential dissolution and precipitation during the development of successive foliations that occurred in zones of high strain/stress (cleavage seams) and zones of low strain/stress, respectively.  相似文献   

Food Deserts in the Prairies? Supermarket Accessibility and Neighborhood Need in Edmonton,Canada*     

Karen E. Smoyer‐Tomic  John C. Spence  Carl Amrhein 《The Professional geographer》2006,58(3):307-326

The U.S. and U.K. literatures have discussed “food deserts,” reflecting populated, typically urban, low‐income areas with limited access to full‐service supermarkets. Less is known about supermarket accessibility within Canadian cities. This article uses the minimum distance and coverage methods to determine supermarket accessibility within the city of Edmonton, Canada, with a focus on high‐need and inner‐city neighborhoods. The results show that for 1999 both of these areas generally had higher accessibility than the remainder of the city, but six high‐need neighborhoods had poor supermarket accessibility. We conclude by examining potential reasons for differences in supermarket accessibility between Canadian, U.S., and U.K. cities.  相似文献