Sound velocity measurement in liquid water up to 25 GPa and 900 K: Implications for densities of water at lower mantle conditions     

Yuki Asahara  Motohiko Murakami  Yasuo Ohishi  Naohisa Hirao  Kei Hirose 《Earth and Planetary Science Letters》2010,289(3-4):479-485

We extended the pressure range of sound velocity measurements for liquid water to 25 GPa and 900 K along the melting curve using a laser heated diamond anvil cell with a combined system of Brillouin scattering and synchrotron X-ray diffraction. Experimental pressure and temperature were obtained by solving simultaneous equations: the melting curve of ice and the equation of state for gold. The sound velocities obtained in liquid water at high pressures and melting temperatures were converted to density using Murnaghan's equation of state by fitting a parameter of the pressure derivative of bulk modulus at 1 GPa. The results are in good agreement with the values predicted by a previously reported equation of state for water based on sound velocity measurements. The equation of state for water obtained in this study could be applicable to water released by dehydration reactions of dense hydrous magnesium silicate phases in cold subducting slabs at lower mantle conditions, although the validity of Murnaghan's equation of state for water should be evaluated in a wider pressure and temperature ranges. The present velocity data provides the basis for future improvement of the accurate thermodynamic model for water at high pressures.  相似文献   

Crustal structure beneath Aso Caldera,Southwest Japan,as derived from receiver function analysis     

Yuki Abe  Takahiro Ohkura  Takuo Shibutani  Kazuro Hirahara  Mamoru Kato 《Journal of Volcanology and Geothermal Research》2010

Aso Volcano experienced a huge pyroclastic eruption 90 thousand years ago, and formed a large caldera (18 km × 25 km). In order to test the hypothesis of a magma body in the mid and lower crust that has been suggested geophysically and geochemically, we investigated seismic velocity discontinuities and velocity structure beneath Aso Caldera using receiver functions and a genetic algorithm inversion. We confirm the existence of the Moho at depths between 30 km and 35 km and a large velocity anomaly should exist in the deep portion of the crust beneath Aso Caldera, from imaging of receiver functions observed only at stations outside the caldera. As a result of a more detailed examination with GA inversion, a low velocity layer is detected at depths between 10 km and 24 km beneath the western part of the caldera. S-wave velocity of the layer is estimated to be 2.0–2.4 km/s. We estimate that the low velocity layer contains at most 15% melt or 30% aqueous fluid. The layer exists near the Conrad and at the same depths as the swarm of the low frequency earthquakes and a compressional and dilatational deformation source which are expected to be caused by fluid movement beneath the middle-eastern part of the caldera. Fluid contained in the layer might be related with huge pyroclastic eruptions of Aso Volcano.  相似文献   

Eccentric installation of splice plates for compressive strength improvement of rectangular hollow section braces     

Hiroshi Tagawa  Yuki Tanaka  Shohei Moriwake 《Bulletin of Earthquake Engineering》2018,16(11):5489-5502

Steel hollow section members are often applied as bracing in steel structures. Field-bolted connections of the slotted-in single splice plate and the gusset plate are popular because of their ease of construction. However, eccentricity between the splice and gusset plate axes reduces the compressive strength of the brace. This study proposes compressive strength improvement of rectangular hollow section braces using eccentrically installed splice plates such that the gusset plate axis coincides with the brace axis. To demonstrate the efficacy of the proposed concept, four compressive loading test results are examined in this study. Test results reveal the influences of splice plate eccentric installation on the brace compressive strength, the out-of-plane displacement, and the strain distribution. The proposed concept is effective for the brace with stiffened splice plates for inducing overall buckling with plastic hinges in the gusset plates. Variation of compressive strength is finally discussed based on the discrepancy between the brace axis and the axis of the plates in which the plastic hinges form at the overall buckling mode ends.  相似文献   

Estimating the thickness of a faulted mechanical layer based on fault spacing: An example from Miyako‐jima Island,southern Ryukyu Arc,Japan     

Sumire Maeda  Makoto Otsubo  Daisuke Asahina  Yuki Furuno 《Island Arc》2020,29(1)

The thickness of the mechanical layer that hosts a group of faults can be estimated from the spacing of saturated faults (i.e. the constant spacing between faults when the fault system is fully developed and has attained its final fault density). We measured fault spacing for a group of saturated active normal faults on Miyako‐jima Island (southern Ryukyu Arc, Japan) and estimated the thickness of the faulted mechanical layer. The measured fault spacing is 1.30 ±0.14 km, and the thickness of the mechanical layer is < 3 km, which is the upper limit of the seismogenic zone. This faulted mechanical layer corresponds to a sedimentary layer in which earthquakes cannot occur. Results indicate that the shallow (< 3 km depth) normal faults on Miyako‐jima Island do not have the potential to cause medium‐size earthquakes as individual faults. The origin of the shallow normal faults might be related to the presence of a larger‐scale, deeper fault. The results indicate that fault spacing provides important information on the potential magnitude of earthquakes associated with active faults.  相似文献   

Constraining sediment provenance for tsunami deposits using distributions of grain size and foraminifera from the Kujukuri coastline and shelf,Japan     

Jessica E. Pilarczyk  Yuki Sawai  Dan Matsumoto  Yuichi Namegaya  Naohisa Nishida  Ken Ikehara  Osamu Fujiwara  Chris Gouramanis  Tina Dura  Benjamin P. Horton 《Sedimentology》2020,67(3):1373-1392

Tsunami deposits preserved in the geological record provide a more comprehensive understanding of their patterns of frequency and intensity over longer timescales; but recognizing tsunami deposits can prove challenging due to post-depositional changes, lack of contrast between the deposits and surrounding sedimentary layers, and differentiating between tsunami and storm deposition. Modern baseline studies address these challenges by providing insight into modern spatial distributions that can be compared with palaeotsunami deposits. This study documents the spatial fingerprint of grain size and foraminifera from Hasunuma Beach and the Kujukuri shelf to provide a basis from which tsunami deposits can be interpreted. At Hasunuma Beach, approximately 50 km east of Tokyo, the spatial distribution of three common proxies (foraminiferal taxonomy, foraminiferal taphonomy and sediment grain size) for tsunami identification were mapped and clustered using Partitioning Around Medoids cluster analysis. Partitioning Around Medoids cluster analysis objectively discriminated two coastal zones corresponding to onshore and offshore sample locations. Results show that onshore samples are characterized by coarser grain sizes (medium to coarse sand) and higher abundances of Pararotalia nipponica (27 to 63%) than offshore samples, which are characterized by finer grain sizes (fine to medium sand), lower abundances of Pararotalia nipponica (2 to 19%) and Ammonia parkinsoniana (0 to 10%), higher abundances of planktonics (15 to 58%) and species with fragile tests including Uvigerinella glabra. When compared to grain-size and foraminiferal taxonomy, foraminiferal taphonomy; i.e. surface condition of foraminifera, a proxy not commonly used to identify tsunami deposits, was most effective in discriminating modern coastal zones (identified supratidal, intertidal and offshore environments) and determining sediment provenance for tsunami deposits at Kujukuri. This modern baseline study assists the interpretation of tsunami deposits in the geological record because it provides a basis for sediment provenance to be determined.  相似文献   

Recent and historical tsunami deposits from Lake Tokotan,eastern Hokkaido,Japan, inferred from nondestructive,grain size,and radioactive cesium analyses     

Shinozaki  Tetsuya  Sawai  Yuki  Ito  Kazumi  Hara  Junko  Matsumoto  Dan  Tanigawa  Koichiro  Pilarczyk  Jessica E. 《Natural Hazards》2020,103(1):713-730

Geological evidence of recent tsunamis from sediment samples collected from Lake Tokotan, a coastal lagoon in eastern Hokkaido, northern Japan, was detected using computed tomography (CT) and soft X-ray images, grain size, and radionuclide profiles. Initial field observations revealed that sediments had no discernable sedimentary structures at the top of the core. However, results of CT imaging, soft X-ray, and grain size analyses show evidence for three invisible sand layers that are intercalated with mud layers. These sand layers exhibit trends of landward fining and thinning. Furthermore, the distribution of sand layers was limited to the center and seaward parts of the lake. Vertical profiles of cesium and lead concentrations in combination with recent eyewitness accounts indicated that these sand layers are correlated with the 1973 Nemuro-oki, 1960 Chilean, and 1952 Tokachi-oki tsunami events. The deeper part of the sediment cores includes three volcanic ash layers and three prehistoric coarse sand layers. The prehistoric layers are correlated with unusually large tsunamis that were geologically identified in previous studies from eastern Hokkaido. These findings suggest that nondestructive techniques, in combination with radionuclide analysis, allow for detection of frequent but faint tsunami deposits. This technique allows for an improved understanding of the history of tsunami inundation in Lake Tokotan and of other locations for which stratigraphic evidence for faint tsunamis layers is not readily apparent from field assessments.

  相似文献   

Effects of structural walls on the elastic–plastic earthquake responses of frame–wall buildings     

Xhafer Kongoli  Tadao Minami  Yuki Sakai 《地震工程与结构动力学》1999,28(5):479-500

Effects of structural walls on the elastic–plastic earthquake response of short- to medium-height reinforced concrete buildings were investigated. The analytical model consists of independent lumped mass systems representing walls and frames connected at each floor. The wall structure undergoes flexural as well as shear deformation and fails in shear at relatively small story drifts, the frames deforming only in shear. As a measure of structural damage, the ductility factor responses of frame structures were calculated for different combinations of base shear coefficients for the frames and walls. In buildings with relatively weak frames, the installation of structural walls did not improve the large plastic response of the frames up to the point where the walls were unfailed in shear and the ductility factors of the frame structure were suddenly reduced to a very small number. For relatively strong frames, however, the response displacements decreased gradually as the number of walls increased, whether or not the walls failed. Empirical formulas for the required base shear coefficients of the walls and frames which gave a target ductility factor response also were derived for two particular groups of accelerograms. These equations should be of practical use in designing frame-wall type buildings and in retrofitting damaged buildings. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

The location and size of a solar hard X-ray burst on September 27, 1969     

T. Takakura  K. Ohki  N. Shibuya  M. Fujii  M. Matsuoka  S. Miyamoto  J. Nishimura  M. Oda  Y. Ogawara  S. Ota 《Solar physics》1971,16(2):454-464

The location and size of a solar impulsive hard X-ray burst have been determined in one dimension to a considerable precision with a balloon-borne X-ray modulation collimator. The center of the X-ray source is on the line passing through the center of a big H flare region of 3 arc min. The size of the X-ray source is remarkably smaller and may be one arc min or less.  相似文献   

Thermal metamorphism of CI and CM carbonaceous chondrites: An internal heating model     

M. Miyamoto 《Meteoritics & planetary science》1991,26(2):111-115

Abstract— Infrared diffuse reflectance spectra were measured for several thermally metamorphosed carbonaceous chondrites with CI-CM affinities which were recently found from Antarctica. Compared with other CI or CM carbonaceous chondrites, these Antarctic carbonaceous chondrites show weaker absorption bands near 3 μm due to hydrous minerals, and weaker absorption bands near 6.9 μm due to carbonates, interpreted as thermal metamorphic features. These absorption bands also disappear in the spectra of samples of the Murchison (CM) carbonaceous chondrite heated above 500 °C, implying that the metamorphic temperatures of the Antarctic carbonaceous chondrites considered here were higher than about 500 °C. Model calculations were performed to study thermal metamorphism of carbonaceous chondrites in a parent body internally heated by the decay of the extinct nuclide ²⁶Al. The maximum temperature of the interior of a body more than 20 km in radius is 500–700 °C for the bulk Al contents of CI and CM carbonaceous chondrites, assuming a ratio of ²⁶Al/²⁷Al = 5 × 10^?6 which has been previously proposed for an ordinary-chondrite parent body. The metamorphic temperatures experienced by the Antarctic carbonaceous chondrites considered here may be attainable by an internally heated body with an ²⁶Al/²⁷Al ratio similar to that inferred for an ordinary-chondrite parent body.  相似文献   

Infrared diffuse reflectance spectra of carbonaceous chondrites: Amount of hydrous minerals     

M. Miyamoto  M. E. Zolensky 《Meteoritics & planetary science》1994,29(6):849-853

Abstract— Infrared diffuse reflectance spectra (2.53–25 μm) of some carbonaceous (C) chondrites were measured. The integrated intensity of the absorption bands near 3 μm caused by hydrous minerals were compared with the modal content of hydrous minerals for the meteorites. The CM and CI chondrites show larger values of the integrated intensity than those of the unique C chondrites Y82162, Y86720 and B7904, suggesting that the amount of hydrous minerals in the CM and CI chondrites is larger, which supports the contention that hydrous minerals were dehydrated by thermal metamorphism in the unique chondrites. Orgueil (CI) has the largest value of the integrated intensity among the C chondrites we measured and shows a sharp absorption band at 3685 cm^?1 (2.71 μm) that is not seen in the spectra of the CM chondrites. There is an excellent correlation between the observed hydrogen content in C chondrites and the integrated intensity. The CM chondrites show a wide variation in the strength of absorption bands at 1470 cm^?1 (6.8 μm), despite the similarity in absorption features near 3 μm for all CM chondrites. The 1470 cm^?1 band could be due to the presence of some hydrocarbons but may also be a result of terrestrial alteration processes.  相似文献