Fractal Determination of Coastal Types Based on GIS--A Case Study of China     

Zhu xiaohua  WU Xiuqin  Wang Jian 《海洋通报(英文版)》2002,4(2)

The probability of fractal determination of coastal types based on GIS is preliminarily discussed with China as an example. Finally, some significant conclusions are drawn: (1) The fractal dimension of coastline of the bedrock coast is larger than that of the plain coast on the same scale map; (2) As far as the bedrock coast is concerned, the larger fractal dimension of coastline of the bedrock coast on the same scale map indicates that the bedrock coast is probably not typical; (3) As far as the plain coast is concerned, the smaller fractal dimension of coastline of the plain coast on the same scale map indicates that it is probably the silt plain coast; (4) The different substantial compositions affect the fractal dimensions of coastlines of different coastal types. In general, the coast which lies in the north of the Hangzhou Bay consists of sand mainly, its surface is flat, and it is connected with the coastal plain, its landform is broad shoal, its total change is comparatively homogenous in the tidal dynamic process, and thus, the relatively smaller fractal dimension of coastline results from this. For the bedrock coast, there is more bedrock, the coastline is comparatively smooth and straight, being affected by the faults and ocean dynamic process, which result in the larger fractal dimension.  相似文献   

秦山核电站邻近水域浮游植物的生态研究     

陆斗定  朱根海 《海洋学研究》1991,9(2):66-80

本文分析了秦山核电站邻近水域生态零点调查四个航次的浮游植物样品,结果表明:调查区浮游植物的种数和细胞密度在时间尺度上均存在明显的季节变化趋势:夏大于秋大于春大于冬,并且与环境因子的变化密切相关,其中最主要的影响因子是温度、盐度和径流,而影响日变化的环境因子主要是潮汐。  相似文献   

黄河三角洲桩西101站潮沟地貌形态及其水动力学研究   总被引：6，自引：1，他引：6  

尹延鸿  成国栋  范顺庭  王玉荣  朱兰部 《海洋科学》1997,21(5):46-49

在潮沟下游，横跨且生趣与潮沟的横断面设了５个观测站，进行了２４ｈ的水动力测量。结果表明，涨落潮流速流向不对称，在潮沟内，涨落潮流流速差别很大，涨潮流流速最大为９ｃｍ／２，而落潮流流速最大可达３８ｃｍ／ｓ。据推测，潮沟内之所以落潮流流速明显大于涨潮流流速，可能是由于潮沟与岸线斜交有关。  相似文献   

牙鲆种群动态及其资源管理     

朱鑫华 《海洋与湖沼》1992,23(3):270-279

本文根据1980—1986年间鱼类生物学参数测定,结合体长分布资料的模拟分析,研究黄、渤海区牙鲆种群年龄结构、死亡动态以及在不同年龄和死亡率条件下世代资源生物量变化的规律。模型分析结果表明,当F=1.0和t_c=6.0a时,单位补充量最大群体产量为1492g。由此认为,现阶段牙鲆资源利用的最佳策略是通过增殖放流,增加资源补充;同时应适当控制捕捞压力,减少渔具对幼鱼资源的破坏并增设繁殖保护区,以追求最大持续产量。  相似文献   

海上平台桶形基础模型压力压贯与负压沉贯试验研究   总被引：1，自引：0，他引：1  

朱儒弟  何生厚 《海岸工程》1999,18(1):60-66

介绍了海上平台桶形基础模型（模型桶）压力压贯和负压沉贯的试验概况,对比分析了两者贯入力的巨大差异和产生的原因,给出了模型桶压力压贯中贯入深度与压力的关系,负压没贯负压与贯入深度,抽吸泵流量,基土渗流量,桶内土塞隆起之间的关系,试验结果表明,负压沉贯可以大大降低以砂质粉土为基土的土抗力,为在胜利油田类似基土海域海上平台应用桶形基础提供了试验依据,为海上现场导管架桶形基础平台的安装就位施工和控制提供了  相似文献   

梭鱼标准代谢、内源氮排泄与体重和温度的关系   总被引：5，自引：0，他引：5  

线薇薇  朱鑫华 《中国海洋大学学报(自然科学版)》2002,32(3):368-374

在 13.5 ,18,2 1.5 ,2 4和 2 7℃ 5个温度条件下测定了梭鱼 (体重范围 1.88～ 14.0 2 g)的标准代谢率和内源氮排泄率。梭鱼标准代谢率随体重的增加而增加 ,二者的关系为幂函数关系 ;随温度的升高而增加 ,二者的关系为指数关系 ;标准代谢率与体重和温度的关系可用如下方程表示 :RS=0 .12 4 6 W0 .9954 e0 .0 84 1T(r2 =0 .92 2 0 )。梭鱼的氨氮、尿素、总氮及能量的排泄率随体重和温度的增加而增加 ,与体重为幂函数关系 ,与温度的关系为多项式形式。梭鱼氨氮和尿素日排泄率的变幅分别为 0 .15～ 0 .88mg N/d和 0 .0 3～ 0 .2 9mg N/d。不同温度下 ,尿素排泄量占总氮比例在 9.9%～2 2 .4 9%之间 ,随温度升高该值有逐渐增大的趋势。  相似文献   

青藏高原东部多年冻土退化对环境的影响   总被引：3，自引：0，他引：3  

朱林楠  吴紫汪 《海洋地质与第四纪地质》1995,15(3):129-136

退化是本区多年冻土变化的基本趋势，不同区段退化幅度有差异，影响退化的因素除了全球气候转暖外，还有局地气候和地下水迳流。在退化敏感的地带，工程建设，牧区生态平衡都有不可忽视的影响。  相似文献   

舟山沿海单齿螺（Monodonta labio）种群的年龄结构,生物量与生长特征     

王一农  王旭华 《海洋湖沼通报》1995,(1):54-60

本文报导了采自舟山沿海单齿螺种群的年龄结构、生物量与生长。自然种群的单齿螺年龄组成以１＾＋和２＾＋龄占优势，壳高、壳宽、壳口高、厣径、体重等生长参数的回归关系良好，单齿螺的生长完全可以用壳高来表示。单齿螺以第一、二年生长最快。采捕季节可定在四、五月间，采捕规格应在壳高１６ｍｍ以上。  相似文献   

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel     

Tan Jiahua  Ma Wei  Pan Bin Associate Professor  Shanghai Jiao Tong University  Shanghai Lecturer  shanghai Jiao Tong University  Shanghai 《中国海洋工程》1992,(1)

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.  相似文献   

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method     

Chen Tieyun Zhu Zhenghong Professor  Dept. of Naval Architecture  Ocean Engineering  Shanghai Jiao Tong University  Shanghai Lecturer 《中国海洋工程》1991,(1)

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.  相似文献