A permanent seismic station beneath the Ocean Bottom     

David Harris  Robert K. Cessaro  Fred K. Duennebier  David A. Byrne 《Marine Geophysical Researches》1987,9(1):67-94

The Hawaii Institute of Geophysics began development of the Ocean Subbottom Seisometer (OSS) system in 1978, and OSS systems were installed in four locations between 1979 and 1982. The OSS system is a permanent, deep ocean borehole seismic recording system composed of a borehole sensor package (tool), an electromechanical cable, recorder package, and recovery system. Installed near the bottom of a borehole (drilled by the D/V Glomar Challenger), the tool contains three orthogonal, 4.5-Hz geophones, two orthogonal tilt meters; and a temperature sensor. Signals from these sensors are multiplexed, digitized (with a floating point technique), and telemetered through approximately 10 km of electromechanical cable to a recorder package located near the ocean bottom. Electrical power for the tool is supplied from the recorder package. The digital seismic signals are demultiplexed, converted back to analog form, processed through an automatic gain control (AGC) circuit, and recorded along with a time code on magnetic tape cassettes in the recorder package. Data may be recorded continuously for up to two months in the self-contained recorder package. Data may also be recorded in real time (digital formal) during the installation and subsequent recorder package servicing. The recorder package is connected to a submerged recovery buoy by a length of bouyant polypropylene rope. The anchor on the recovery buoy is released by activating either of the acoustical command releases. The polypropylene rope may also be seized with a grappling hook to effect recovery. The recorder package may be repeatedly serviced as long as the tool remains functionalA wide range of data has been recovered from the OSS system. Recovered analog records include signals from natural seismic sources such as earthquakes (teleseismic and local), man-made seismic sources such as refraction seismic shooting (explosives and air cannons), and nuclear tests. Lengthy continuous recording has permitted analysis of wideband noise levels, and the slowly varying parameters, temperature and tilt.Hawaii Institute of Geophysics Contribution 1909.  相似文献   

Analytical and experimental investigation on vibrating rectangular plates with two opposite free edges and internal supports while the remaining are elastically restrained against rotation     

P.A.A. Laura  L. Ercoli 《Ocean Engineering》1986,13(3)

This paper deals with the determination of an approximate fundamental frequency equation for a rectangular plate with two edges (y = 0, b) elastically restrained against rotation while the edges x=0, a are free but internal supports parallel to the free edges are present in the structural system. The algorithmic procedure can be easily implemented on a micro computer or even a hand, programmable calculator.Good engineering agreement with experimental results is shown to exist in the case of a plate with edges y=0,b rigidly clamped.  相似文献   

Study of the fauna inhabiting the holdfasts of Laminaria hyperborea (gunn.) fosl. along some environmental and geographical gradients     

C.R.C. Sheppard  D.J. Bellamy  A.L.S. Sheppard 《Marine environmental research》1980,4(1):25-51

A survey of the holdfast fauna of Laminaria hyperborea was carried out at thirty-five sites around the UK, mostly along the North Sea and south coasts.Data from different age classes of holdfast from a polluted and unpolluted site indicate that volume of holdfast space is a most important measurement of sample size, a minimum size of sample being one litre and, preferably, three.Gradients of increased heavy metals were defined down the North Sea and west coasts and, by utilising measurements of kelp penetration, water clarity gradients were determined as increasing northwards on the west coast and both north and southwards on the North Sea coast from a point near Tyne and Wear county. Analysis of holdfast fauna showed numerous gradients of total numbers, species and diversity which correlate closely with the heavy metal and water clarity gradients, or with undetermined parameters analogous to latitude and longitude. Where there were increases of heavy metals or decreases of water clarity, various reciprocal relationships between suspension feeders and all other trophic groups were commonly observed. In the North Sea numbers of suspension feeders increased while numbers of all other trophic groups declined. On the west coast a heavy metal increase correlated with a decreasing species richness of all trophic categories except suspension feeders, while with total numbers only suspension feeders showed an increase. On the south coast transect neither gradient existed, and only here did all trophic categories covary, except at one very polluted site where the same reciprocal relationship was again indicated.In terms of species similarity the North Sea showed a greater pool of common species than occurred between sites of other regions and between North Sea sites with other regions, despite the widest range of heavy metal levels and wate clarity that existed there. Between-site similarity appeared to be much more dependent on geographical proximity than on the two measured environmental factors. It is suggested that effects of clarity-reduction can be measured by trophic analysis more successfully than by species presence or absence, and that changes of holdfast fauna along the North Sea coast are due largely to pollution.  相似文献   

A Pull-Up Shallow Water Seismometer     

W. A. Smith  P. A. F. Christie 《Marine Geophysical Researches》1977,3(3):235-250

An inexpensive Pull-Up Shallow Water Seismometer (PUSS) has been designed and built to conduct long range seismic refraction experiments in the North Sea and the continental shelf around Britain, with the particular goal of studying the crustal and lithospheric structure under the epeirogenic basin of the North Sea. Signals from a gimbal-mounted 3-component geophone and a hydrophone are frequency modulated and mixed with clock and flutter correction signals before being recorded on a standard speed cassette tape recorder, with one hour of recording time. A 100 hour programmable timer allows the interval between the time of reset of the clock and each shot window of optional 5 or 10 min duration, to be preselected. The PUSS is launched and recovered using a pull-up technique originally developed for current meters. The replay system is also described.In May 1976 sea trials of 5 PUSSes were conducted along a 200 km refraction line in the North Sea. The encouraging performance of the equipment resulted in the decision to build a further 10 units and to proceed with a 400 km refraction line planned for the summer of 1977.  相似文献   

A sample changer for automated seawater nutrient analysis systems     

Richard D. Tomlinson  Louis I. Gordon 《Ocean Engineering》1973,2(4):179-182

An automatic sample changer based upon a commercially available 20-port rotary valve has been developed for use in automated seawater nutrient analyses. All parts exposed to seawater are of stainless steel, Teflon®, or Kel-F®. The sampler has proven to be rugged and efficient in both shore and shipboard laboratories.  相似文献   

Geophysical Evidence of a Relict Oceanic Crust in the Southwestern Scotia Sea     

Lodolo  Emanuele  Coren  Franco  Schreider  Anatoly A.  Ceccone  Giulio 《Marine Geophysical Researches》1997,19(5):439-450

The southwestern part of the Scotia Sea, at the corner of the Shackleton Fracture Zone with the South Scotia Ridge has been investigated, combining marine magnetic profiles, multichannel seismic reflection data, and satellite-derived gravity anomaly data. From the integrated analysis of data, we identified the presence of the oldest part of the crust in this sector, which tentative age is older than anomaly C10 (28.7 Ma). The area is surrounded by structural features clearly imaged by seismic data, which correspond to gravity lows in the satellite-derived map, and presents a rhomboid-shaped geometry. Along its southern boundary, structural features related to convergence and possible incipient subduction beneath the continental South Scotia Ridge have been evidenced from the seismic profile. We interpret this area, now located at the edge of the south-western Scotia Sea, as a relict of ocean-like crust formed during an earlier, possibly diffuse and disorganized episode of spreading at the first onset of the Drake Passage opening. The successive episode of organized seafloor spreading responsible for the opening of the Drake Passage that definitively separated southern South America from the Antarctic Peninsula, instigated ridge-push forces that can account for the subduction-related structures found along the western part of the South Scotia Ridge. This seafloor accretion phase occurred from 27 to about 10 Ma, when spreading stopped in the western Scotia Sea Ridge, as resulted from the identification of the marine magnetic anomalies.  相似文献   

Implementation of an expert system for the design of single-point, subsurface oceanographic moorings     

Santhosh Kumaran  Richard A. Skop 《Ocean Engineering》1990,17(4)

The design of single-point, subsurface moorings is carried out a present by a design engineer with the help of some computer programs. These computer programs are used for analyzing the mooring, but the setting-up of the initial mooring configuration and the subsequent modifications on the basis of the results of the analysis are carried out by the design engineer.An expert system for mooring design is developed to eliminate the human expert from the design process and thus to enable a novice to design a mooring by himself. Using the expert system, an optimum least-weight in air design can be developed in much less time than is usually required in conventional procedures. Perhaps the most significant advantage is that the system can serve as a vehicle for effective transfer of present day expertise for future applications.The system is developed and implemented on an IBM PC/AT. It has a user-friendly, interactive, menu-driven input procedure and a sophisticated output facility. The design process is totally automated and the requirement to consult a human expert is easily eliminated. The system has tremendous flexibility and a knowledge engineer can easily adapt it to the specific requirements of a particular user. The concept of machine learning is introduced by recording the failure data and using this information in the later decision-making processes. A CAD package, AUTOCAD, is used to generate the drawings and an interface is developed between the CAD package and the expert system so that the former is transparent to the user.  相似文献   

JONSWAP's parameters: Sorting out the inconsistencies     

A.W. Lewis  R.N. Allos 《Ocean Engineering》1990,17(4)

The original prognostic equations for the JONSWAP-spectrum contained inconsistencies. A subsequent paper (Hasselmann et al., 1976, J. phys. Oceanogr.6, 200–208) attempted to regularise the situation. This paper shows that there were still inconsistencies in the prognostic equations giving overestimations of the first moment of the spectrum and consequently the significant wave height. The prognostic equations are reworked systematically and results presented. It is shown that variable σ_a, σ_b and γ must be used to achieve consistent results  相似文献   

Study of fluoride in polluted and unpolluted estuarine environments     

M. D. Zingde  A. V. Mandalia 《Estuarine, Coastal and Shelf Science》1988,27(6)

Mindhola River estuary, which receives industrial waste containing high concentrations of fluoride, and Purna River estuary, which is free from fluoride contamination, have been investigated. While fluoride behaved conservatively in Purna River estuary, significant deviation from the theoretical dilution line (TDL) in the chlorinity range 0·5–8‰ was observed in Mindhola River estuary due to the externally added fluoride which largely remained in solution. The excess of fluroide over the theoretically calculated value was at a maximum around a chlorinity of 3‰. High natural fluoride content of the river waters resulted in F/Cl ratios exceeding 300 × 10⁻⁵ at low chlorinities. The ratio decreased rapidly with increasing chlorinity and the value near to that of seawater was observed at chlorinities above 14‰.  相似文献   

Nonlinear coupled response of offshore tension leg platforms to regular wave forces   总被引：1，自引：0，他引：1  

A.K. Jain 《Ocean Engineering》1997,24(7):577-592

Among the compliant platforms, the tension leg platform (TLP) is a vertically moored structure with excess buoyancy. The TLP is designed to behave in the same way as any other moored structure in horizontal plane, at the same time inheriting the stiffness of a fixed platform in the vertical plane. Dynamic response analysis of a TLP to deterministic first order wave forces is presented, considering coupling between the degrees-of-freedom surge, sway, heave, roll, pitch and yaw. The analysis considers nonlinearities produced due to changes in cable tension and due to nonlinear hydrodynamic drag forces. The wave forces on the elements of the pontoon structure are calculated using Airy's wave theory and Morison's equation ignoring diffraction effects. The nonlinear equation of motion is solved in the time domain by Newmark's beta integration scheme. The effects of different parameters that influence the response of the TLP are then investigated.  相似文献