Estimation of site effects using strong motion data of BYTNet array in Turkey     

Ö. T. Özmen  H. Yamanaka  H. E. Zaineh  M. A. Alkan 《Journal of Seismology》2017,21(1):137-154

Simultaneous estimation of effects of source, propagation path, and local site amplification was carried out using observed strong motion records in a frequency range from 0.8 to 20 Hz for the purpose of empirical evaluation of the local site effects in different geological conditions in the northwestern part of Turkey. The analyzed data are S-wave portions of 162 accelerograms from 39 shallow events observed at 14 sites of BYTNet array. A spectral separation method was applied to the observed S-wave spectra. The solutions for source spectra, inelasticity factor of propagation path for S-waves (Q _s-value), and factor of site amplification at each site were obtained in a least squares sense. In the analysis, we assumed that the factor of the site amplification at a reference site is the same as that of theoretical amplification of S-waves to the soil model whose bottom layer has an S-wave velocity around 2.15 km/s. The estimated Q _s-value of the propagation path is modeled as Q _s(f)?=?87.4f^0.78. The estimated site amplifications are characterized into three groups. The sites in the first group belong to rock site with no dominant peaks at a frequency range of 2 to 10 Hz. The second group of hard soil sites is characterized with moderately dominant peaks at a frequency of 5 Hz. The last group for soft soil sites has common peaks at a frequency of 4 Hz with larger amplitudes than those in the hard soil group. We, then, compare the amplifications with average S-wave velocity in top 30 m of the shallow S-wave profiles and proposed linear empirical formula between them at each frequency. We, furthermore, inverted the observed amplification factors into S-wave velocity and Q _s-value profiles of the deep soil over the basement.  相似文献   

Statistical analysis of methane explosions in Turkey’s underground coal mines and some recommendations for the prevention of these accidents: 2010–2017     

Dursun  Arif Emre 《Natural Hazards》2020,100(1):329-343

Natural Hazards - There is an increased risk in post-fire debris flow (DF) occurrences in the western USA with recent increase in wildfire frequencies. DFs are destructive, causing high loss to...  相似文献   

C, O, S and Sr isotope studies on the genesis of Fe-carbonate and barite mineralizations in the Attepe iron district (Adana, Southern Turkey)     

uayip Küpeli  M. Muzaffer Karadag  Ahmet Ayhan  Adnan Dyen  Fetullah Ar&#x;k 《Chemie der Erde / Geochemistry》2007,67(4):313-322

The Attepe district consists of Precambrian, Lower–Middle Cambrian, Upper Cambrian–Lower Ordovician and Mesozoic formations. It contains several iron deposits and occurrences. Three types of iron-mineralizations can be distinguished in the area; (i) Sedimentary Fe-sulfide in Precambrian bituminous metapelitic rocks, and Fe-oxides in Precambrian metasandstones (SISO), (ii) vein-type Fe-carbonate and oxides composed of mainly siderite, ankerite and hematite including barite in Lower–Middle Cambrian metacarbonates of the Çaltepe Formation (HICO), (iii) karstic Fe-oxides and hydroxides essentially in the Lower–Middle Cambrian metacarbonates and the unweathered Fe-carbonates (KIO). The latter type is more widespread and located at the upper parts of the most important mineable iron deposits like Attepe deposit.

Oxygen-, carbon-, sulfur- and strontium-isotope studies have been performed on siderites and barites in the vein-type ores, and on calcites in the recrystallized Çaltepe Limestones to investigate the sources and formation mechanism of primary ore-forming constituents. The δ¹³C values of siderites and calcites in limestones of the Çaltepe Formation range from −10.10‰ to −8.20‰, and from −0.8‰ to 2.30‰. Both carbonate minerals show δ¹⁸O values between 17.50–18.30‰ and 16.20–23.00‰, respectively. The δ¹³C and δ¹⁸O isotopic variations do not indicate any direct or linear relations between siderites and limestones. However, it is possible that the carbon and oxygen isotopic compositions of carbonate minerals could be changed to some extent, when limestones were subjected to hydrothermal processes or thermal alterations during metamorphism.

The isotopic values of barites display 32.40–38.30‰ for δ³⁴S and 12.20–14.70‰ for δ¹⁸O. The strontium isotope ratios (0.717169–0.718601) of barites and the sulfur isotope compositions of barites and pyrites suggest that there are no direct linkages of ore-forming compounds neither with a magmatic source nor with sedimentary pyrite formations in the Precambrian bituminous shales of the Attepe formation.

According to the field observations and the stable isotope data, siderites and ankerites should be formed by interaction between iron-rich hydrothermal fluids and Çaltepe limestones, whereas isotope ratios of barites indicate that they were formed by mixing of sulfur-rich meteoric waters and deeply circulated hydrothermal solutions.  相似文献   

Determination of the Optimal Location of the Air Hole in Venturi Aerators     

Ahmet Baylar  Mehmet Unsal  Fahri Ozkan 《洁净——土壤、空气、水》2007,35(3):246-249

Dissolved oxygen is one of the most important water quality parameters. Aeration improves the water quality by maintaining good dissolved oxygen levels in water. Dissolved oxygen enters water by entrainment of air bubbles. A method of aeration that has become popular in recent years is the venturi aeration. In the present paper, experimental studies were conducted to investigate the effect of the location of the air hole in venturi tubes upon air injection. It was observed from the results that the location of the air hole playes a significant role for the air injection. The optimal air hole location that maximized the air injection in venturi aerators was determined.  相似文献   

Tsunami hazard in the Eastern Mediterranean and its connected seas: Toward a Tsunami warning center in Turkey     

Nurcan Meral Ozel  Necmioglu Ocal  Yalciner Ahmet Cevdet  Dogan Kalafat  Mustafa Erdik 《Soil Dynamics and Earthquake Engineering》2011

Tsunami mitigation, preparedness and early warning initiatives have begun at the global scale only after the tragic event of Sumatra in 2004. Turkey, as a country with a history of devastating earthquakes, has been also affected by tsunamis in its past. In this paper we present the Tsunami Hazard in the Eastern Mediterranean and its connected seas (Aegean, Marmara and Black Sea) by providing detailed information on historically and instrumentally recorded significant tsunamigenic events surrounding Turkey, aiming to a better understanding of the Tsunami threat to the Turkish coasts. In addition to the review of the Tsunami hazard, we have studied a possible Tsunami source area between Rhodes and SW of Turkey using Tsunami numerical model NAMI DANCE-two nested domains. We have computed a maximum positive amplitude of 1.13 m and maximum negative amplitude of −0.5 m at the Tsunami source by this study. The distribution of maximum positive amplitudes of the water surface elevations in the selected Tsunami forecast area and time histories of water level fluctuations near selected locations (Marmaris, Dalaman, Fethiye and Kas towns) indicate that the maximum positive amplitude near the coast in the selected forecast area exceeds 3.5 m. The arrival time of maximum wave to Marmaris, Dalaman, is 10 min, while that of Fethiye and Kas towns is 15–20 min. The maximum positive amplitudes near the shallow region of around 10 m depth are 3 m (Marmaris), 1 m (Dalaman), 2 m (Fethiye) and 1 m (Kas). Maximum positive amplitudes of water elevations in the duration of 4 h simulation of the Santorini-Minoan Tsunami in around 1600 BC in the Aegean Sea are also calculated based on a simulation performed using 900 m grid resolution of Aegean sea bathymetry with a 300 m collapse of 10 km diameter of Thera (Santorini) caldera. We have also presented the results of the Tsunami modeling and simulation for Marmara Sea obtained from a previous study. Last part of this paper provides information on the establishment of a Tsunami Warning Center by KOERI, which is expected to act also as a regional center under the UNESCO Intergovernmental Oceanographic Commission – Intergovernmental Coordination Group for the Tsunami Early Warning and Mitigation System in the North-Eastern Atlantic, the Mediterranean and Connected Seas (ICG/NEAMTWS) initiative, emphasizing on the challenges together with the future work needed to be accomplished.  相似文献   

Tsunami hazard in the eastern Mediterranean and its connected seas: Towards a Tsunami warning center in Turkey     

Nurcan Meral Ozel  Necmioglu Ocal  Yalciner Ahmet Cevdet  Kalafat Dogan  Erdik Mustafa 《Soil Dynamics and Earthquake Engineering》2011

  相似文献   

On‐line Solid Phase Extraction of Copper in Water Samples with Flow Injection Flame Atomic Absorption Spectrometry     

Tülin Çetin  Ahmet Ülgen  Şerife Tokalıoğlu 《洁净——土壤、空气、水》2011,39(3):244-249

An on‐line solid phase extraction method for the preconcentration and determination of Cu(II) by flame atomic absorption spectrometry has been described. The procedure is based on the retention of Cu(II) ions at pH 6.0 on a minicolumn packed with Amberlite XAD‐1180 resin impregnated with chrome azurol S. After preconcentration, Cu(II) ions adsorbed on the impregnated resin were eluted by 1 mol L^?1 HNO₃ solution. Several parameters, such as pH, type of eluent, flow rates of sample and eluent solutions, amount of resin were evaluated. At optimized conditions, for 3.5 min of preconcentration time, the system achieved a detection limit of 1.0 µg L^?1, and a relative standard deviation of 1.2% at 0.2 µg mL^?1 copper. An enrichment factor of 56‐fold was obtained with respect to the copper determination. The proposed method was successfully validated by the analysis of standard reference material (TMDA 54.4 lake water) and recovery studies. The method was applied to the preconcentration of Cu(II) in natural water samples.  相似文献   

Regional gravimetric quasi-geoid model and transformation surface to national height system for Turkey (THG-09)     

Ali Kiliçoğlu  Ahmet Direnç  Hasan Yildiz  Murat Bölme  Bahadir Aktuğ  Mehmet Simav  Onur Lenk 《Studia Geophysica et Geodaetica》2011,55(4):557-578

Turkish regional geoid models have been developed by employing a reference earth gravitational model, surface gravity observations and digital terrain models. The gravimetric geoid models provide a ready transformation from ellipsoidal heights to the orthometric heights through the use of GPS/leveling geoid heights determined through the national geodetic networks. The recent gravimetric models for Turkish territory were computed depending on OSU91 (TG-91) and EGM96 (TG-03) earth gravitational models. The release of the Earth Gravitational Model 2008 (EGM08), the collection of new surface gravity observations, the advanced satellite altimetry-derived gravity over the sea, and the availability of the high resolution digital terrain model have encouraged us to compute a new geoid model for Turkey. We used the Remove-Restore procedure based on EGM08 and applied Residual Terrain Model (RTM) reduction of the surface gravity data. Fast Fourier Transformation (FFT) was then used to obtain the residual quasigeoid from the reduced gravity. We restored the individual contributions of EGM08 and RTM to the whole quasi-geoid height (TQG-09). Since the Helmert orthometric height system is adopted in Turkey, the quasi-geoid model (TQG-09) was then converted to the geoid model (TG-09) by making use of Bouguer gravity anomalies and digital terrain model. After all we combined a gravimetric geoid model with GPS/leveling geoid heights in order to obtain a hybrid geoid model (THG-09) (or a transformation surface) to be used in GPS applications. The RMS of the post-fit residuals after the combination was found to be ± 0.95 cm, which represents the internal precision of the final combination. And finally, we tested the hybrid geoid model with GPS/leveling data, which were not used in the combination, to assess the external accuracy. Results show that the external accuracy of the THG-09 model is ± 8.4 cm, a precision previously not achieved in Turkey until this study.  相似文献   

Assessment of potential seismic hazard and site effect in Antakya (Hatay Province), SE Turkey     

Semir Över  Aydın Büyüksaraç  Özcan Bekta  Ahmet Filazi 《Environmental Earth Sciences》2011,62(2):313-326

Antakya city is at risk because of strong earthquakes occurring in the area, and different soil conditions that can produce variation of the ground motion amplification. Microzonation of cities provides a basis for site-specific hazard analysis in urban settlements. In particular, seismic microzonation can be provided by means of detailed seismic assessment of the area, including earthquake recordings and geological studies. In this paper, we propose a preliminary microzonation map for the city of Antakya, based on the variation of the dominant periods and shear velocities of the sediments covering the area. The periods are retrieved from microtremor measurements conducted at 69 sites, using the horizontal-to-vertical spectral ratio technique. The results of microtremor analysis were compared with data obtained from refraction microtremor (ReMi) measurements at four profiles crossing the studied area. According to the classification of dominant periods, Antakya city can be divided into five zones, probably prone to different levels of seismic hazard. The shorter natural periods are in inner Antakya and both the sides of Asi River (i.e., northern and southern parts). The eastern and western parts of Antakya have maximum dominant periods. The V _s ³⁰ values were calculated by using the ReMi method along the profiles. Antakya city has V _s ³⁰ values in the range of category C of the national earthquake hazard reduction programme site classification.  相似文献   

An explicit expression of theB n,m q -integrals in the fourier analysis of eclipsing variables     

Huseyin Alkan 《Astrophysics and Space Science》1979,60(1):233-235

  相似文献