An insight into the Bucaramanga nest     

Zoya Zarifi  Jens Havskov  Andrzej Hanyga   《Tectonophysics》2007,443(1-2):93-105

We used the local seismicity for the period of 1993 to 2001, in the northeast of Colombia to show the existence of two slabs in the north and south of the Bucaramanga nest. The northern slab has a dip angle of about 25° and the southern slab has a 50° dip angle, while the dip in the Bucaramanga nest is about 29°. In order to explain the nature of the Bucaramanga nest, we proposed the scenario of collision between these two slabs. Using a 3D Finite Element Model (FEM) we show that collision can concentrate, modify and perturb the stress field. The active process of dehydration embrittlement at intermediate depths and the concentrated stress field in the collision zone may explain the high rate of seismic activity inside the Bucaramanga nest. The perturbed and modified stress field resulting from the simultaneous effect of collision between two subducted slabs and subduction of the lithosphere under its own weight can explain the variation in the focal mechanism of micro-earthquakes and the complexity in the source of the moderate size earthquakes in the Bucaramanga nest.  相似文献   

Palaeolimnology of Lake Zeribar, Iran, and its climatic implications     

Krystyna Wasylikowa  Andrzej Witkowski  Adam Walanus  Andrzej Hutorowicz  Stefan W. Alexandrowicz  Jerzy J. Langer 《Quaternary Research》2006,66(3):477-493

Lake Zeribar sediments covering the time period of the last 25,000 years were examined for the contents of seeds, fruits, Characeae, diatoms, and molluscs. Reconstructions of the variations in the lake water level, salinity, and trophy suggest a sequence of climatic changes. Three pronounced stages of low and varying lake-water level occurred ca. 17,700–15,400, 12,600–12,000, and 10,000–6000 cal yr BP. Some water-level changes were correlated with variations in salinity. The most pronounced increase of salinity occurred 17,700–15,700 and 12,600–12,000 cal yr BP, and less distinct ones occurred about 6400–5900 and 2500 cal yr BP. Diatom assemblages indicated a strong increase of lake trophy ca. 20,200 cal yr BP. Between 6000 and 5000 cal yr BP diatoms characteristic of eutrophy increased in core 63J, and at about 3200 cal yr BP a distinct increase in mesotrophic forms occurred in core 70B. The changes in the occurrence of various organisms indicate increased temperatures about 21,000 cal yr BP, between 15,400 and 12,600, about 12,000, and about 11,700 cal yr BP. The reduced occurrence or disappearance of some of them suggest temperature decreases about 17,700–15,400 and 12,600–12,000 cal yr BP.  相似文献   

The performance of the empirical models on industrial hydrocyclone design     

Wanwilai Kraipech  Wu Chen  Tom Dyakowski  Andrzej Nowakowski 《International Journal of Mineral Processing》2006,80(2-4):100-115

Many empirical models have been used widely for designing hydrocyclones in industry. These empirical models consist of a set of design equations. Most of the design equations are based on the correlations obtained experimentally, using dimensionless similarity numbers. These equations have their limitations due to the specific systems used for model development. Therefore, in many cases, they cannot be used with confidence to predict the design of an individual separator, or the overall plant configuration that is required to meet different user requirements. A modified version of the existing design equations presented by previous researchers was developed. The design equations, describing four fundamental parameters: pressure drop, flow recovery to underflow, corrected cut size and classification function, were modified by fitting with set of experimental data to obtain the system-specific constant parameters. These modified design equations were then called, the fine-tuned design equations. Four sets of fine-tuned design equations describing all the fundamental parameters were constructed and used to predict the separation performance of many hydrocyclone operational systems at the Dow Chemical Company, Texas, USA. The performance of these equations is evaluated, and the limitations of their use are discussed, thus providing useful insights into hydrocyclone design.  相似文献   

Dasycladacean alga <Emphasis Type="Italic">Palaeodasycladus</Emphasis> in the northern Tethys (West Carpathians,Poland) and its new palaeogeographic range during the Early Jurassic     

Tomasz Rychliński  Andrzej Gaździcki  Alfred Uchman 《Swiss Journal of Geoscience》2018,111(1-2):305-315

The green alga Palaeodasycladus was recognized in Lower Jurassic shallow-marine high-energy calcarenites of the Cho? Nappe (Hronicum Domain) in the Tatra Mts in Poland. This occurrence indicates the most Northern record of Palaeodasycladus as it is known mostly from the southern part of the Western Tethys. The stratigraphic range of Palaeodasycladus (Norian, Sinemurian–Pliensbachian) and the upper Pliensbachian age of the overlying calcarenites (previous data on the basis of brachiopods) suggest that the studied part of the section was deposited during the Sinemurian–early Pliensbachian. The previous and current reports on occurrences of Palaeodasycladus allowed determination of a new northern palaeogeographic range of the shallow-marine Mediterranean biota during the Early Jurassic time.  相似文献   

Present and future status of the underground space use in Poland     

Barbara Uliasz-Misiak  Andrzej Przybycin 《Environmental Earth Sciences》2016,75(22):1430

  相似文献   

Flow rule in a high-cycle accumulation model backed by cyclic test data of 22 sands   总被引：1，自引：1，他引：0  

Torsten Wichtmann  Andrzej Niemunis  Theodoros Triantafyllidis 《Acta Geotechnica》2014,9(4):695-709

The flow rule used in the high-cycle accumulation (HCA) model proposed by Niemunis et al. (Comput Geotech 32: 245, 2005) is examined on the basis of the data from approximately 350 drained long-term cyclic triaxial tests (N = 10⁵ cycles) performed on 22 different grain-size distribution curves of a clean quartz sand. In accordance with (Wichtmann et al. in Acta Geotechnica 1: 59, 2006), for all tested materials, the “high-cyclic flow rule (HCFR)”, i.e., the ratio of the volumetric and deviatoric strain accumulation rates \(\dot{\varepsilon}_{\rm{v}}^{{\rm acc}}/\dot{\varepsilon}_{\rm{q}}^{{\rm acc}}\) , was found dependent primarily on the average stress ratio η ^av = q ^av/p ^av and independent of amplitude, soil density and average mean pressure. The experimental HCFR can be fairly well approximated by the flow rule of the modified Cam-clay (MCC) model. Instead of the critical friction angle \(\varphi_{\rm{c}}\) which enters the flow rule for monotonic loading, the HCA model uses the MCC flow rule expression with a slightly different parameter \(\varphi_{\rm{cc}}\) . It should be determined from cyclic tests. \(\varphi_{\rm{cc}}\) and \(\varphi_{\rm{c}}\) are of similar magnitude but not always identical, because they are calibrated from different types of tests. For a simplified calibration in the absence of cyclic test data, \(\varphi_{\rm{cc}}\) may be estimated from the angle of repose \(\varphi_{\rm{r}}\) determined from a pluviated cone of sand (Wichtmann et al. in Acta Geotechnica 1: 59, 2006). However, the paper demonstrates that the MCC flow rule with \(\varphi_{\rm{r}}\) does not fit well the experimentally observed HCFR in the case of coarse or well-graded sands. For an improved simplified calibration procedure, correlations between \(\varphi_{\rm{cc}}\) and parameters of the grain-size distribution curve (d ₅₀,   C _u) have been developed on the basis of the present data set. The approximation of the experimental HCFR by the generalized flow rule equations proposed in (Wichtmann et al. in J Geotech Geoenviron Eng ASCE 136: 728, 2010), considering anisotropy, is also discussed in the paper.  相似文献   

Interpretation of tracer tests performed in fractured rock of the Lange Bramke basin, Germany   总被引：1，自引：1，他引：0  

Piotr Maloszewski  Andreas Herrmann  Andrzej Zuber 《Hydrogeology Journal》1999,7(2):209-218

 Two multitracer tests performed in one of the major cross-fault zones of the Lange Bramke basin (Harz Mountains, Germany) confirm the dominant role of the fault zone in groundwater flow and solute transport. Tracers having different coefficients of molecular diffusion (deuterium, bromide, uranine, and eosine) yielded breakthrough curves that can only be explained by a model that couples the advective–dispersive transport in the fractures with the molecular diffusion exchange in the matrix. For the scale of the tests (maximum distance of 225 m), an approximation was used in which the influence of adjacent fractures is neglected. That model yielded nearly the same rock and transport parameters for each tracer, which means that the single-fracture approximation is acceptable and that matrix diffusion plays an important role. The hydraulic conductivity of the fault zone obtained from the tracer tests is about 1.5×10^–2 m/s, whereas the regional hydraulic conductivity of the fractured rock mass is about 3×10^–7 m/s, as estimated from the tritium age and the matrix porosity of about 2%. These values show that the hydraulic conductivity along the fault is several orders of magnitude larger than that of the remaining fractured part of the aquifer, which confirms the dominant role of the fault zones as collectors of water and conductors of fast flow. Received, April 1997 Revised, January 1998, August 1998 Accepted, August 1998  相似文献   

Bianchi Cosmologies as Dynamical Systems     

Andrzej J. Maciejewski  Marek Szydłowski 《Celestial Mechanics and Dynamical Astronomy》1999,73(1-4):17-24

We discuss specific properties of dynamical systems originating from cosmology and relativity. In particular, we present results of our study of the Bianchi class A cosmological models. We introduce new variables in which the Hamiltonian constraint for all the class A models is solved algebraically. We present results of dimension reduction of the investigated models. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Sibsonian and non-Sibsonian natural neighbour interpolation of the total electron content value     

Kacper Kotulak  Adam Froń  Andrzej Krankowski  German Olivares Pulido  Manuel Henrandez-Pajares 《Acta Geophysica》2017,65(1):13-28

In radioastronomy the interferometric measurement between radiotelescopes located relatively close to each other helps removing ionospheric effects. Unfortunately, in case of networks such as LOw Frequency ARray (LOFAR), due to long baselines (currently up to 1500 km), interferometric methods fail to provide sufficiently accurate ionosphere delay corrections. Practically it means that systems such as LOFAR need external ionosphere information, coming from Global or Regional Ionospheric Maps (GIMs or RIMs, respectively). Thanks to the technology based on Global Navigation Satellite Systems (GNSS), the scientific community is provided with ionosphere sounding virtually worldwide. In this paper we compare several interpolation methods for RIMs computation based on scattered Vertical Total Electron Content measurements located on one thin ionospheric layer (Ionospheric Pierce Points—IPPs). The results of this work show that methods that take into account the topology of the data distribution (e.g., natural neighbour interpolation) perform better than those based on geometric computation only (e.g., distance-weighted methods).  相似文献   

BEYOND FAILURE IN GRANULAR MATERIALS     

Wei Wu  Andrzej Niemunis 《国际地质力学数值与分析法杂志》1997,21(3):153-174

Recent investigations on the hypoplastic constitutive model for granular materials show that the failure surface can be surpassed by some stress paths. This is contradictory to the conventional definition of failure surface in plasticity, according to which the stress is allowed to move on the failure surface but never across it. In the present paper, the interrelations among the different constitutive models are discussed with special reference to failure and stability. For the hypoplastic constitutive equation, the accessible stress states and the stable stress states are found to be enclosed by a bound surface and a stability surface in the stress space, respectively. Theoretical findings about the bound surface and the stability surface are verified qualitatively by presenting results of triaxial tests on dry sand. © 1997 by John Wiley & Sons, Ltd.  相似文献