Extreme deformation characteristics and countermeasures for a tunnel in difficult grounds in southern Shaanxi,China     

Jinxing Lai  Xiuling Wang  Junling Qiu  Jianxun Chen  Zhinan Hu  Hao Wang 《Environmental Earth Sciences》2018,77(19):706

The Qingling–Bashan (QB) mountain region in southern Shaanxi mainly consists of strongly compressive zones from east to west, with tight folds and compressive fractures. There is a wide distribution of soft rocks of various types, such as phyllite and slate, accompanied by complex geological structures. Ironically, tunnel construction in these difficult grounds with complicated geological conditions embraces a high risk of extreme deformation due to various unpredictable reasons, which can frequently cause collapse and result in budget overruns during the construction period. Therefore, it is crucial to conduct effective countermeasures to eliminate or avoid such adverse impacts. This paper provides a case study on the “Yingfeng tunnel” (a tunnel constructed in soft rock consisting of a slate ground) based on a geological survey, indoor experiments and in situ monitoring. A successive rock mass deformation resulted in the tunnel lining seriously intruding into construction clearance and some other sections, even collapsing during the construction. The maximum displacement amount was 62.5 cm, while the maximum deformation speed reached as high as 34.18 mm/day. Additionally, to evaluate the construction impacts of tunnelling-induced geo-hazards, an investigation on extreme deformation was conducted. Considering the time-dependent features of the rock mass deformation, the constraint-convergence method was used to put forward applicable countermeasures in this paper. Finally, from the feedbacks of monitoring results, extreme deformation of the Yingfeng tunnel was effectively controlled.  相似文献   

Heavy metals status,transport mechanisms,sources, and factors affecting their mobility in Chinese agricultural soils   总被引：3，自引：0，他引：3  

Feng Jing  Xiaomin Chen  Zhijiang Yang  Bilin Guo 《Environmental Earth Sciences》2018,77(3):104

Heavy metals are the focus of much interest because of their environmental persistence, toxicity, and mobility in soils. Some of the Chinese soils have been contaminated with heavy metals due to expansion of mining industries, pesticides usage, and other anthropological activities, which made the agro-ecosystem to become contaminated. The objective of this review is to illuminate the current pollution status, sources of heavy metals, transport mechanisms, and the factors affecting their mobility in Chinese soils. The additional studies in the future will present on source identification and the heavy metal transport characteristics in soil.  相似文献   

A review of jet grouting practice and development     

Pierre Guy Atangana Njock  Jun Chen  Giuseppe Modoni  Arul Arulrajah  Yong-Hyun Kim 《Arabian Journal of Geosciences》2018,11(16):459

The jet grouting technique was originally initiated in the UK and progressively developed following the needs for larger geometries, ease of implementation, economic rationality, and better mechanical properties. This paper presents a comprehensive review of the development and practice of jet grouting through some fundamental concepts and relevant case studies. Subsequently, a laboratory testing program is performed to investigate the factors affecting the efficacy of the twin grouting system. The principal objective of this study is to define the suitable conditions for the jet grouting efficacy regarding economic rationality as well as quality control. For the first phase, a particular emphasis is placed on the properties of jet columns, site geological conditions, implementation methods, and the justification of each selected treatment option, while the second phase mainly focuses on the unconfined compressive strength (UCS) tests. It follows that the mono-fluid jet grouting system presents a valuable flexibility in dealing with complex configurations; yet, the double- and triple-fluid systems are more indicated for cases of mass treatments for which large portions of space must be treated and overlapping is fundamentally important for the reliability of the treatment. Furthermore, it was established that the efficacy of the twin-jet method primarily relies on the proper adequacy of some critical parameters, namely, the cement content, the water-cement ratio, and cement slurry-water glass ratio. In spite of some uncertainties inherently related to the technique, the UCS test represents the quintessential laboratory index for evaluating the mechanical properties of grouted elements, deriving jet grouting efficacy and the economics of jet grouts.  相似文献   

Experimental and numerical investigation on coal drawing from thick steep seam with longwall top coal caving mining     

Jin-wang Zhang  Jia-chen Wang  Wei-jie Wei  Yi Chen  Zheng-yang Song 《Arabian Journal of Geosciences》2018,11(5):96

Steep coal seam mining activities will frequently occur during the next few decades in China. In this study, both experimental and numerical methods are employed to investigate the coal drawing from thick steep seam with longwall top coal caving mining. A series of analyses is performed to investigate the features of the drawing body, the distribution of top coal recovery ratio and the shape of the rock flow under steep conditions. The results indicate that the drawing body of top coal develops prior to upper side of the panel face obviously, and the top coal in the central part of the panel has a higher recovery ratio than that in the lower and upper parts in steep coal seam with caving mining method. The flow paths of the fragmented top coal are nearly straight lines moving towards the drawing window, and the fastest path maintains a constant angle with the plumb line. The spatial shape of the rock flow indicates “bidirectional asymmetry,” which results from the presence of the shield beam and dip angle of the coal seam; thus, this is the root cause of the appearance of the drawing body’s prior development towards the upper side of the panel. The field observation data indicates the same distribution of top coal recovery as that in the physical experiment and numerical simulation. Furthermore, suggested measurements are proposed to improve top coal recovery in steep seam mining based on the engineering practice of Dayuan coal mine.  相似文献   

Electrical conductivity of the plagioclase–NaCl–water system and its implication for the high conductivity anomalies in the mid-lower crust of Tibet Plateau     

Ping?Li  Xinzhuan?GuoEmail author  Sibo?Chen  Chao?Wang  Junlong?Yang  Xingfan?Zhou 《Contributions to Mineralogy and Petrology》2018,173(2):16

In order to investigate the origin of the high conductivity anomalies geophysically observed in the mid-lower crust of Tibet Plateau, the electrical conductivity of plagioclase–NaCl–water system was measured at 1.2 GPa and 400–900 K. The relationship between electrical conductivity and temperature follows the Arrhenius law. The bulk conductivity increases with the fluid fraction and salinity, but is almost independent of temperature (activation enthalpy less than 0.1 eV). The conductivity of plagioclase–NaCl–water system is much lower than that of albite–NaCl–water system with similar fluid fraction and salinity, indicating a strong effect of the major mineral phase on the bulk conductivity of the brine-bearing system. The high conductivity anomalies of 10^?1 and 10⁰ S/m observed in the mid-lower crust of Tibet Plateau can be explained by the aqueous fluid with a volume fraction of 1 and 9%, respectively, if the fluid salinity is 25%. The anomaly value of 10^?1 S/m can be explained by the aqueous fluid with a volume fraction of 6% if the salinity is 10%. In case of Southern Tibet where the heat flow is high, the model of a thin layer of brine-bearing aqueous fluid with a high salinity overlying a thick layer of partial melt is most likely to prevail.  相似文献   

Geochemistry of organic matter and elements of black shale during weathering in Northern Guizhou,Southwestern China: Their mobilization and inter-connection     

Xuan Tang  Jinchuan Zhang  Yang Liu  Chao Yang  Qian Chen  Wei Dang  Panwang Zhao 《Chemie der Erde / Geochemistry》2018,78(1):140-151

Different from previous studies on effect of weathering upon geochemical variation along a single weathered profile, this paper provides a new methodology validated by comparing a weathered outcrop samples and their stratigraphic counterpart un-weathered core samples in a nearby shallow borehole. This outcrop and borehole penetrated the Ordovician-Silurian Wufeng–Longmaxi shales, located in the same anticline structure in the northern part of Guizhou Province, Southern China. The mineral composition, major, trace and rare earth elements (REEs) composition and Rock-Eval parameters of outcrop and core samples were analyzed and compared. Organic matter (OM) was observed in the microscope and extracted for elements analysis. The results show that short-term weathering still has significant influence on OM, mineral and elemental composition of black shales. The elements composition shows the outcrop profile was moderately weathered. The REEs compositions do not alter much during weathering process and the REEs composition and their relative ratios still are valid for rock origin determination. The OM, mainly composed by graptolite and bitumen, even entering the highly-over thermal maturity, is still sensitive to the weathering with a systematic loss 30–50% of TOC along the outcrop profile, which suggests that the OM consumption is predominantly controlled by weathering duration and the distance from the weathering surface. In turn, OM has significant influence on the trace elements transportation behavior during weathering. Some trace elements associated with the OM such as V, Cr, Th, U, Ni and Co, change significantly in their absolute concentration during weathering, but their relative ratios do not necessarily change too much and might be still reliable proxies for paleo-environmental determination. The mobility of shale minerals during weathering is in the following order: plagioclase?>?potassium feldspar and dolomite >pyrite and OM. Short-term weathering can also result in considerable transportation of elements and significant variation of minerals content in black shale, which may pose potentially high environmental and engineering risk in the regions rich in black shale.  相似文献   

Zircon U–Pb–Hf isotopes and geochemistry analyses of the Huyu igneous rocks in northwestern Beijing,China: possible new evidence for the initial destruction of the North China Craton     

Zejia Ji  Baofu Han  Haifei Yu  Yan Chen 《International Geology Review》2018,60(2):196-216

The timing and extent of cratonic destruction are crucial to understanding the crustal evolution of the North China Craton (NCC). Zircon U–Pb–Hf isotope data and the whole-rock major and trace element characteristics of the Huyu igneous rocks in northwestern Beijing, China, provide possible new evidence for the initial destruction of the NCC. The igneous rocks occur as several sills and dikes, including lamprophyre, monzonite porphyry, and aplite. The lamprophyres have high Mg^# and K₂O contents. The monzonite porphyries have high Mg^#, high K₂O contents, and negative ε_Hf(t) values with zircon U–Pb ages of 225.5–227.7 Ma. These two types of rocks are both enriched in large ion lithosphere elements (LILEs) and light rare earth elements (LREEs) but are depleted in high field strength elements (HFSEs) and high rare earth elements (HREEs) and have almost no Eu anomalies and relatively high total rare earth element (ΣREE) contents. In contrast, the aplites exhibit high silica and K₂O contents, low MgO contents, and more negative ε_Hf(t) values with a zircon U–Pb age of 206.2 Ma. The aplites are also enriched in LILEs and LREEs but are depleted in HFSEs and HREEs, with strongly negative Eu, Ti, P, La, Ce, and Sr anomalies and relatively low ΣREE contents. These results indicate that the lamprophyres and monzonite porphyries represent a continuous cogenetic magma evolution series after melt derived from an enriched metasomatized lithospheric mantle experienced crust assimilation and fractional crystallization. The aplites were produced by the fractional crystallization of low-Mg parental magma derived from melting of the ancient Archaean crust. The occurrence of the Huyu intrusive rocks with many other plutons of similar ages on the northern margin of the NCC suggests that the northern NCC entered an intraplate extensional tectonic environment in the Late Triassic.  相似文献   

新疆伊吾县宝山铁矿床矽卡岩成因研究     

刘洋  王得权  王辰  郑立宏  王瑞美 《矿床地质》2018,37(3):630-642

宝山铁矿床位于东准噶尔库兰卡孜干-北塔山-纸房-琼河坝岛弧带东段。宝山铁矿中矽卡岩与铁矿体密切共生,是重要的找矿标志。研究区矽卡岩中石榴子石、透辉石单矿物电子探针分析结果显示,石榴子石属于钙铁榴石-钙铝榴石系列,透辉石属于透辉石-钙铁辉石系列。矽卡岩中高场强元素(如Nb、Ta、Zr、Hf)相对亏损,稀土元素表现出LREE富集,HREE亏损的特点。∑REE为39.90×10~(-6)~178.43×10~(-6),∑LREE/∑HREE比值1.64~7.53,(La/Yb)N比值为1.32~10.10,轻、重稀土元素分异程度较弱,与玄武质凝灰岩具有相似的地球化学特征,这说明矽卡岩是玄武质凝灰岩受后期岩浆热液改造形成,随着温度和压力降低,磁铁矿沉淀形成铁矿体。  相似文献   

A temporal analysis of the association between breast cancer and socioeconomic and environmental factors     

Xuwei Chen 《GeoJournal》2018,83(6):1239-1256

Although some biological factors have been confirmed to increase the risk of breast cancer, they only account for a small portion of the overall incidence in females. Women’s socioeconomic status and hazardous exposures to potential breast cancer carcinogens could modify their risks of breast cancer. From a public health perspective, it is important to understand what socioeconomic and environmental factors are associated with an elevated risk of breast cancer and how they vary geographically, temporally, and among different populations. Using an integrated approach, this study examines the associations between the incidence rate of invasive breast cancer and socioeconomic characteristics and environmental risks over time in Illinois for two periods: 1999–2003 and 2009–2013. Based on data from the US Census, ACS, and EPA, this study builds two sets of regression models to investigate the associations. The findings reveal that compared to environmental risks, socioeconomic factors are much more significant factors associated with the risk of breast cancer. The significant explanatory variables differ somehow between the two periods, yet with some agreement. Among the environmental risk variables examined, two toxic carcinogens, ethylene oxide and benzene were associated with an elevated risk of breast cancer for each time period respectively.  相似文献   

3D打印技术在矿床学中的应用研究——以内蒙古乌力吉敖包萤石矿Ⅲ号矿体为例     

陈奇 《地质与勘探》2018,54(4):833-845

3D打印(3D printing)是一种以三维模型为样本的快速成形技术,它通过逐层打印或粉末熔铸的方式来构造需要的立体图形。本文从3D打印技术的原理及其发展现状入手,重点列举内蒙古乌力吉敖包萤石矿,利用3D打印机打印具有现实可观性的地质体实体,探讨3D打印技术作为新兴的科技手段应用于矿床学教学与研究的应用价值和发展前景。研究发现,3D打印技术在矿体三维可视化中的应用符合地质图件立体化和3D打印技术多领域化的趋势,未来3D打印技术在地质领域的应用也有助于开拓矿床学教学和研究的新方式与新思路。  相似文献