Comparison of Delivery Methods for Enhanced In Situ Remediation in Clay Till     

Camilla M. Christiansen  Ida Damgaard  Mette Broholm  Timo Kessler  Knud E. Klint  Bertel Nilsson  Poul L. Bjerg 《Ground Water Monitoring & Remediation》2010,30(4):107-122

Three methods for enhanced delivery of in situ remediation amendments in low-permeability deposits have been tested at a site in Denmark: pneumatic fracturing, direct-push delivery, and hydraulic fracturing. The testing was carried out at an uncontaminated part of a farm site, previously used for storage of chlorinated solvents, underlain by basal clay till with hydraulic conductivity ranging from 7.1× 10^–11 to 3.5 × 10^–7 m/s at testing depths 2.5 to 9.5 m b.s. Fluorescent tracers fluorescein and rhodamine WT were delivered. Tests of all three delivery methods have not been carried out at a single site before, and thus, this study provides unique data for comparison of enhanced delivery methods in both the vadose and saturated zone. Results show that pneumatic fracturing with nitrogen gas and propagation pressures of 1 to 9 bar had a distribution radius of less than 2 m, and produced dense networks of tracer-filled natural fractures above the redox boundary (0 to 3 m b.s.) and widely spaced, discrete, induced, tracer-filled subhorizontal fractures at depth (>3 m b.s.). Direct-push delivery at pressures of 8 to 30 bar had a distribution radius of approximately 1 m, distributed tracer primarily in natural fractures above the redox boundary and in discrete, closely spaced (but not merging) induced fractures below the redox boundary. Hydraulic fracturing with a sand-guar mixture at pressures of 0 to 6 bar produced an elliptical, asymmetrical, bowl-shaped fracture with a physical radius of approximately 3.5 m at 3 m b.s. The geometry of hydraulic fractures attempted emplaced at 6.5 and 9.5 m b.s. is uncertain, but clearly not horizontal as desired. The direct-push delivery method is robust and efficient for enhanced delivery at the clay till site in question, which based on thorough geological characterization is deemed a geologically representative basal clay till site.  相似文献   

Redox-active phases and radionuclide equilibrium valence state in subsurface environments – New insights from 6th EC FP IP FUNMIG     

C. Bruggeman  N. Maes  B.C. Christiansen  S.L.S. Stipp  E. Breynaert  A. Maes  S. Regenspurg  M.E. Malström  X. Liu  B. Grambow  Th. Schäfer 《Applied Geochemistry》2012

  相似文献   

Origin and extent of fresh groundwater, salty paleowaters and recent saltwater intrusions in Red River flood plain aquifers, Vietnam   总被引：1，自引：0，他引：1  

Luu T. Tran  Flemming Larsen  Nhan Q. Pham  Anders V. Christiansen  Nghi Tran  Hung V. Vu  Long V. Tran  Hoan V. Hoang  Klaus Hinsby 《Hydrogeology Journal》2012,20(7):1295-1313

A model has been established on the origin and extent of fresh groundwater, salty paleowaters and saltwater from recent seawater intrusions in the Red River flood plain in Vietnam. This was done with geological observations, geophysical borehole logging and transient electromagnetic methods. Salt paleowater is present up to 50–75?km from the coastline, with occurrence controlled by the Holocene transgression. A density-driven leaching of salty porewater has occurred from high-permeability Holocene sediments into underlying Pleistocene deposits, whereas diffusion has dominated in low-permeability layers. In the Pleistocene aquifer, the highest content of dissolved solids is found below two intrinsic valleys with Holocene marine sediments and along the coastline. Recent intrusion of saltwater from the South China Sea is observed in shallow groundwater 35?km inland, probably a result of transport of salty water inland in rivers or leaching of paleowaters from very young near-coast marine sediments. The observed inverted salinity profile, with high saline water overlying fresher groundwater, has been formed due to the global eustatic sea-level changes during the last 8,000–9,000?years. The proposed model may therefore be applicable to other coastal aquifers, with a proper incorporation of the local geological environments.  相似文献   

Measurement of arrival time of particles in extensive air showers using TDC32     

S. K. Gupta  J. Christiansen  Y. Hayashi  A. Jain  P. K. Mohanty  K. C. Ravindran  B. Satyanarayana 《Experimental Astronomy》2013,35(3):507-526

Arrival time of particles in an extensive air shower (EAS) is a key physical parameter to determine its direction. EAS direction is useful for studies of anisotropy and composition of cosmic rays, and search for multi-TeV γ-rays sources. Accurate timing may be used to search exotic phenomena such as production of new particles at extremely high energies available during early stages of development of EAS and also for detecting sub-relativistic hadrons in EAS. Time to digital converters (TDCs) are used to perform this task. Traditional TDCs operate in the START-STOP mode with limited dynamic range and single-hit capability. With the advent of high luminosity collider LHC, need for TDCs with large dynamic range, multi-hit capability and TRIGGERED mode of operation became necessary. A 32 channel TDC was designed for the GRAPES-3 experiment on a CAMAC platform around TDC32, an ASIC developed by micro-electronics group at CERN, Geneva. Four modules were operated in the GRAPES-3 experiment. Here, we present details of the circuit design and their performance over several years. The multi-hit feature of this device was used to study the time structure of particles in the EAS on time scale of ~1 μs. The distribution of time intervals in the multi-hit data shows an exponential profile with a time constant of ~370 ns. These delayed particles are likely to be neutrons produced in the EAS core that were recorded in the scintillator detectors following the relativistic EAS front.  相似文献