Silurian and Devonian systems     

Maxwell R. Banks  E. D. Gill  K. L. Burns 《Australian Journal of Earth Sciences》2013,60(2):177-187

The Ediacara mineral field is situated 30 km W of Beltana on the western margins of the Flinders Ranges, South Australia, and consists of silver‐lead and copper deposits in lower Cambrian carbonate rocks that contain anomalous base‐metal contents throughout the Adelaide Geosyncline. The lower Cambrian rocks, which consist of the basal Parachilna Formation and overlying Ajax Limestone, rest disconformably on the Precambrian, and at Ediacara occupy a shallow N‐S elongate syncline near the hinge zone of the Adelaide Geosyncline. The main primary ore minerals of the silver‐lead mineralization are galena and pyrite, with very minor chalcopyrite and sphalerite, and rare tetrahedrite and pearceite. The gangue consists mainly of silica (both chalcedony and quartz), with minor dolomite and rare barite. The mineralization is stratabound and occurs in conformable zones, the lowest of which commences about 30–50 m above the base of the Cambrian sequence. The host to the silver‐lead mineralization, the Ajax Limestone, can be subdivided into three units which represent a set of lithologies, structures and organic traces indicative of a shallow near‐shore carbonate environment. The silver‐lead mineralization is mainly present in sandy and laminated dolomites which were deposited in an environment ranging from sub‐tidal to bar and channel and tidal flat, respectively. Four types of mineralization have been recognized; disseminated sulphides of syngenetic and/or diagenetic origin and epigenetic concentrations along stylolites, in veins and as breccia fillings. Post‐depositional solution activity has affected a large proportion of the carbonate sequence. The effects of this activity range from stylolites through stylobreccias to solution collapse breccias. The epigenetic concentrations of mineralizations have apparently been formed by the remobilization of the disseminated sulphides during solution activity. The ore and gangue minerals of the epigenetic mineralization display both euhedral forms and distinct colloform banding, and framboidal textures have also been observed in both pyrite and galena. There is evidence of repeated episodic precipitation and no simple paragenetic sequence can be recognized. Fluid inclusions in silica and dolomite associated with the epigenetic mineralization have homogenization temperatures of 159 to 199°C and freezing temperatures that indicate the fluids to be saline brines containing NaCl with CaCl₂ and/or MgCl₂. Sulphur isotope analyses show a range of 8³⁴S values from ‐12.5 to +8.6 per mil, with no evidence of significant differences between the four types of mineralization. The data suggest deposition of the disseminated sulphides as a result of biological reduction of seawater sulphate in a system partially open with respect to sulphate supply. Subsequent remobilization of sulphides apparently involved little or no sulphur isotope fractionation. The Ediacara silver‐lead deposits have many features in common with Mississippi Valley‐type lead‐zinc deposits and appear to have similarities in terms of genesis, in that the epigenetic mineralization has been formed as a result of post‐depositional solution activity during diagenesis in a sedimentary basin. The scale of transport of the metals deposited as the epigenetic mineralization at Ediacara appears, however, to have been very much less than that of the metals in other Mississippi Valley‐type deposits.  相似文献   

Reverse time migration of CMP-gathers an effective tool for the determination of interval velocities     

Dan Loewenthal  Theodor Krey 《Surveys in Geophysics》1989,10(2-4):349-376

One of the most important steps in the conventional processing of reflection seismic data is common midpoint (CMP) stacking. However, this step has considerable deficiencies. For instance the reflection or diffraction time curves used for normal moveout corrections must be hyperbolae. Furthermore, undesirable frequency changes by stretching are produced on account of the dependence of the normal moveout corrections on reflection times. Still other drawbacks of conventional CMP stacking could be listed.One possibility to avoid these disadvantages is to replace conventional CMP stacking by a process of migration to be discussed in this paper. For this purpose the Sherwood-Loewenthal model of the exploding reflector has to be extended to an exploding point model with symmetry to the lineP _EX M whereP _EX is the exploding point, alias common reflection point, andM the common midpoint of receiver and source pairs.Kirchhoff summation is that kind of migration which is practically identical with conventional CMP stacking with the exception that Kirchhoff summation provides more than one resulting trace.In this paper reverse time migration (RTM) was adopted as a tool to replace conventional CMP stacking. This method has the merit that it uses the full wave equation and that a direct depth migration is obtained, the velocityv can be any function of the local coordinatesx, y, z. Since the quality of the reverse time migration is highly dependent on the correct choice of interval velocities such interval velocities can be determined stepwise from layer to layer, and there is no need to compute interval velocities from normal moveout velocities by sophisticated mathematics or time consuming modelling. It will be shown that curve velocity interfaces do not impair the correct determination of interval velocities and that more precise velocity values are obtained by avoiding or restricting muting due to non-hyperbolic normal moveout curves.Finally it is discussed how in the case of complicated structures the reverse time migration of CMP gathers can be modified in such a manner that the combination of all reverse time migrated CMP gathers yields a correct depth migrated section. This presupposes, however, a preliminary data processing and interpretation.  相似文献   

Miscellaneous information     

Pu-Xiong Liu  Xiu-Qi Chen  Xiao-Jian Lü  Dan Han 《Bulletin of Volcanology》1988,50(Z1):57-67

Miscellaneous information  相似文献   

Moravian and Silesian nationalities: A new phenomenon in the ethnic map of the Czech Lands?     

P. Daněk 《GeoJournal》1993,30(3):249-254

In the 1991 population census, 1.4 million inhabitants of the Czech Republic applied for Moravian or Silesian nationality, which did not exist before.They expressed their consciousness of territorial appurtenance to the historical provinces of Moravia and Silesia and by this declaration they set it above the appurtenance to the Czech nation. New social cleavage thus developed in ethnically almost homogeneous environment of the Czech Republic, which constitutes a potential threat of the further splitting of the State. Trying to find the causes of such a phenomenon, the author deals with the territorial differentiation of these inhabitants and factors which influenced it. The close interconnection with political demands is stressed. The insensive centralizing measures of the communist regime are considered as the direct impulses of the present development. The phenomenon is understood as a specific manifestation of the posttotalitarian social crisis in Central and Eastern Europe.  相似文献   

若干特殊地表风蚀的风洞实验研究   总被引：10，自引：1，他引：10  

邹学勇  刘玉璋 《地理研究》1994,13(2):41-48

经风洞模拟实验,本文对四种特殊地表在净风和挟沙风情况下的风蚀特性,进行了定量的研究。揭示了原始地表结构受人为破坏后,其抗风蚀能力急剧降低的特点。探讨了风成沙粒配、戈壁风蚀平衡与风蚀有关的几个问题。  相似文献   

遥感影像信息在澳门、磨刀门海域工程建设中的应用及其效益     

罗丹  陈学廉 《遥感学报》1993,(3)

本文介绍了计算机处理和光学处理相结合的信息提取方法并得到显著效益。根据澳门海域和磨刀门海域工程建设中的实际需要,成功地运用遥感影像信息为澳门海域工程物理模型试验提供了模型水流流态与原型水流流态相似性的验证,为磨刀门海域围垦工程提供了水下潜坝的动态影像信息,并取得了较好的社会效益和经济效益。  相似文献   

Reply to the 'Comment On Two Recent Teleseismic Waveform Inversion Articles By Taymaz Et Al.' By R. Westaway     

James Jackson  Dan Mckenzie 《Geophysical Journal International》1993,112(3):543-543

  相似文献   

碳棒涂膜式PVC膜铯离子选择电极的研制和应用   总被引：3，自引：0，他引：3  

但德忠  谭明勇 《矿物岩石》1990,10(4):105-108

本文作者研制成功以四苯硼铯为活性物质的碳棒涂膜式PVC膜铯离子选择性电极。电极最佳膜组成:四苯硼铯5mg,邻苯二甲酸二丁酯0.4ml,硝基苯0.2ml,PVC粉0.2g。电极性能优良,制作简单,操作方便。结合大粒度磷钼酸铵和结晶形锑酸分离K~+,Na~+,巳将此电极用于卤水样中铯的测定,结果令人满意。  相似文献   

Raman scattering study of the high-temperature vibrational properties and stability of CaGeO3 perovskite     

Dan J. Durben  George H. Wolf  Paul F. McMillan 《Physics and Chemistry of Minerals》1991,18(4):215-223

The vibrational properties of metastable Ca-GeO₃ perovskite are investigated as a function of temperature using Raman scattering. Mode-assignments are derived from polarized spectra of optically oriented single crystals. Neither symmetry-breaking structural transformations nor soft-mode behavior is revealed in the Raman spectra between room temperature and 650° C. Only a small decrease in the local static octahedral tilt angles can be inferred from the Raman data over this temperature range. A Landau extrapolation of the lowest frequency A_g modes suggests that these modes become critical near 2000° C, a temperature that is above the extrapolated zero pressure melting point.  相似文献   

DISPERSION MODELING OF MULTIPLE SOURCES USING THE HP-41CV     

Dan H. Allen 《Ground water》1985,23(1):85-89

Abstract. WMPLUME is an analytic dispersion model based on the Wilson and Miller equation presented here in a program for the HP-41CV handheld, programmable calculator, the HP-41CX, or the HP-41C with four memory modules. The user specifies the spacing and extent of the field of observation points. The calculator can handle up to 36 fully penetrating, continuous injection well sources or a lesser number of discontinuous wells. The time of observation can be changed easily and sources can be added or deleted readily. The code is prepared for use with or without a printer attached to the calculator.  相似文献