DISCUSSION OF "A Program to Calculate Aquifer Transmissivity from Specific-Capacity Data for Programmable Calculators," by J. B. Czarnecki and R. W. Craig     

Jack E. Kelly 《Ground water》1986,24(2):237-237

  相似文献   

Airborne radar and in-situ observations of a shallow stratus with drizzle     

G. Vali  R. D. Kelly  A. Pazmany  R. E. McIntosh 《Atmospheric Research》1995,38(1-4)

Observations were made of a shallow stratus of upslope origin using an aircraft equipped with insitu probes and with a vertically-pointing radar of 3-mm wavelength. A cloud layer of 300 m thickness was found below the inversion; an additional layer of 100 m thickness was located within the inversion. The coldest temperature within the cloud was -2°C and the cloud contained no ice particles. Drizzle drops up to 180 Am were present in both cloud layers.The observations reveal precipitation and air motion structures of approximately 1 km horizontal dimensions. The origin of this organization appears to be weak convection. In addition, mixing played an important role in forming the cloud droplet and drizzle drop size distributions.  相似文献   

GROUND-WATER DISPERSION CALCULATIONS WITH A PROGRAMMABLE CALCULATOR     

William E. Kelly 《Ground water》1982,20(6):736-739

Abstract. A simple and convenient method for calculating two-dimensional dispersion on a TI 58 or 59 programmable calculator utilizing the normal distribution program available in the Solid State Software Master Library module as a subroutine is presented with an example.  相似文献   

Reply to Gruhn and Bryan's comments on “Cave sites,faunal analysis,and big-game hunters of the Great Basin: A caution”     

Kelly R. McGuire 《Quaternary Research》1982,18(2):240-242

  相似文献   

A friction damped base isolation system with fail-safe characteristics     

James M. Kelly  Karl E. Beucke 《地震工程与结构动力学》1983,11(1):33-56

An experimental study of a Coulomb friction damped aseismic base isolation system with fail-safe characteristics is described in this paper. The base isolation system utilized commercially made natural rubber bearings and a skid system which comes into operation at preset-levels of relative horizontal displacement between the structure and the foundation. The fail-safe skid provides hysteretic damping and prevents failure of the isolation system in the event of displacements larger than those assumed in the original design. The isolation system can be designed for an earthquake which can be reasonably expected within the lifetime of the structure; in the event of an earthquake of unanticipated intensity the failsafe system will prevent collapse of the structure. The testing of the system involved an 80,000lb model, approximately 1/3 scale to a real structure mounted on the 20′ × 20′ shaking table at EERC and subject to a variety of earthquake inputs. The results show that the hysteretic effect of the fail-safe system does not greatly increase the accelerations experienced by the structure but considerably reduces the relative displacements at the isolation bearings. The action of the fail-safe system was tested by using an earthquake input that produced a resonant response in the isolated mode of the model. The stability limit of the isolation system was exceeded and the bearings failed but complete failure of the isolation system and thus collapse of the model was prevented by the fail-safe system. The implementation of the system in full scale structures poses no technical or construction problems. An equivalent linearization technique was developed for this system for design purposes using response spectra. The accuracy of this approach was verified by comparison with the experimental results.  相似文献   

A crustal seismic velocity model for the UK, Ireland and surrounding seas   总被引：1，自引：0，他引：1  

Annabel Kelly  Richard W. England  Peter K. H. Maguire 《Geophysical Journal International》2007,171(3):1172-1184

A regional model of the 3-D variation in seismic P -wave velocity structure in the crust of NW Europe has been compiled from wide-angle reflection/refraction profiles. Along each 2-D profile a velocity–depth function has been digitised at 5 km intervals. These 1-D velocity functions were mapped into three dimensions using ordinary kriging with weights determined to minimise the difference between digitised and interpolated values. An analysis of variograms of the digitised data suggested a radial isotropic weighting scheme was most appropriate. Horizontal dimensions of the model cells are optimised at 40 × 40 km and the vertical dimension at 1 km. The resulting model provides a higher resolution image of the 3-D variation in seismic velocity structure of the UK, Ireland and surrounding areas than existing models. The construction of the model through kriging allows the uncertainty in the velocity structure to be assessed. This uncertainty indicates the high density of data required to confidently interpolate the crustal velocity structure, and shows that for this region the velocity is poorly constrained for large areas away from the input data.  相似文献   

Investigation of Reductive Dechlorination Supported by Natural Organic Carbon   总被引：1，自引：0，他引：1  

Heather V. Rectanus  Mark A. Widdowson  Francis H. Chapelle  Catherine A. Kelly  John T. Novak 《Ground Water Monitoring & Remediation》2007,27(4):53-62

  相似文献   

Optimum damping in linear isolation systems     

Jose A. Inaudi  James M. Kelly 《地震工程与结构动力学》1993,22(7):583-598

Optimum isolation damping for minimum acceleration response of base-isolated structures subjected to stationary random excitation is investigated. Three linear models are considered to account for the energy dissipation mechanism of the isolation system: a Kelvin element, a linear hysteretic element and a standard solid linear element, commonly used viscoelastic models for isolation systems comprising natural rubber bearings and viscous dampers. The criterion selected for optimality is the minimization of the mean-square floor acceleration response. The effects of the frequency content of the excitation and superstructure properties on the optimum damping and on the mean-square acceleration response are addressed. The study basically shows that the attainable reduction in the floor acceleration largely depends on the energy dissipation mechanism assumed for the isolation system as well as on the frequency content of the ground acceleration process. Special care should be taken in accurately modelling the mechanical behaviour of the energy dissipation devices.  相似文献   

Seismic response of heavily damped base isolation systems     

Hsiang-Chuan Tsai  James M. Kelly 《地震工程与结构动力学》1993,22(7):633-645

The development of an efficient energy-dissipating mechanism that works in conjunction with laminated elastomeric bearings in order to reduce the lateral deformation of the isolation system has always been a goal of base isolation research. Theoretically, this deformation will be reduced to the minimum if damping augmentation of the isolation system can reach a critical value. However, augmenting the isolation damping may cause some unwanted side effects. The purpose of this paper is to study the influence of isolation damping on the seismic response of heavily damped base-isolated buildings. The base isolation system is assumed to be linearly viscoelastic and is analysed using the complex mode method. Solutions derived by using perturbation techniques for a two-degree-of-freedom system and the computer simulation for a multiple-degree-of-freedom system reveal that augmenting the isolation damping can reduce efficiently the deformation of the isolation system, but at the price of increasing the high-frequency vibration in the superstructure. When the damping ratio of the isolation system is beyond some level, increasing the isolation damping will enlarge the extreme values of the base and superstructural accelerations. It is also found that approximate solutions derived from the use of classical damping and classical modes of vibration in the seismic analysis of heavily damped base isolation systems can be substantially in error.  相似文献   

Preliminary evidence for human fecal contamination in corals of the Florida Keys,USA   总被引：6，自引：0，他引：6  

Lipp EK  Jarrell JL  Griffin DW  Lukasik J  Jacukiewicz J  Rose JB 《Marine pollution bulletin》2002,44(7):666-670

Corals and reef environments are under increased stress from anthropogenic activities, particularly those in the vicinity of heavily populated areas such as the Florida Keys. The potential adverse impacts of wastewater can affect both the environment and human health; however, because of the high decay rate of bacterial indicators in coral reef waters it has been difficult to document the presence of microbial contaminants and to assign risks in these environments. Here we show initial evidence that microorganisms associated with human feces are concentrated along the surface of coral heads relative to the overlying water column in the Florida Keys. Bacterial indicators (fecal coliform bacteria, enterococci or Clostridium perfringens) were detected in 66.7% of the coral surface microlayer (CSM) samples at levels between five and 1000 CFU/100 ml, but were found infrequently and at low numbers in the overlying water column ( < or = 2.5 CFU/100 ml). Similarly, enterovirus nucleic acid sequences, an indicator of human-specific waste, were detected in 93.3% of the CSM samples and only once in the water column by cell culture. Results show that coral mucus may accumulate enteric microorganisms in reef environments, and may indicate a risk to public and environmental health despite low indicator levels in the surrounding water.  相似文献