Pearl culture and the islanders' society of the torres strait     

George Ohshima 《GeoJournal》1988,16(2):157-168

Islanders of the Torres Strait are originally skilled seamen. They have rich and correct knowledge about the physical circumstances of the sea, and of the ecological conditions of the maritime resources. The strait itself is the best fishing ground of natural pearl throughout the Pacific waters, then, pearl-seekers came from Sydney and pearls were sold even in London. Of course, Islanders were employed as labourers of diver-boats, on which they made intimate relation to Japanese divers who had excellent ability of diving and pearl-collecting. After World War II, new marine industry was introduced by Japanese, that is, pearl-culturing. Australia-Japan joint enterprises settled their pearl-farms in the strait, and Islanders found their good job with desirable incomes there. Moreover, they are getting some special technics of sea affairs in this industry. Author explains the cultural change of Islanders' society concerned with pearl-culturing in these decades.  相似文献   

Center to limb variation of the intensity of the photospheric faculae     

Tadashi Hirayama  Fumio Moriyama 《Solar physics》1979,63(2):251-255

Center to limb variation of the excess brightness of photospheric facular granules was observed at 530 nm with a balloon-borne telescope of 10 cm aperture. Facular granules are found to be 9.2% and 16.2% brighter than the adjacent quiet region at cos = 0.65 and 0.50 respectively, being the angle between the Sun's normal and the line of sight. This observation, together with our earlier result (Hirayama, 1978), leads to facular models which are 600 K hotter than the photosphere if the diameter of facular granules is assumed to be 600 km, and 1000 K hotter if 150 km is assumed instead. It was also found that the soft X-ray bright points as observed with the Skylab do not correspond spatially to the photospheric facular granules near the polar region.  相似文献   

A simplified method of constructing fragility curves for highway bridges     

Kazi R. Karim  Fumio Yamazaki 《地震工程与结构动力学》2003,32(10):1603-1626

Fragility curves are found to be useful tools for predicting the extent of probable damage. They show the probability of highway structure damage as a function of strong motion parameters, and they allow the estimation of a level of damage probability for a known ground motion index. In this study, an analytical approach was adopted to develop the fragility curves for highway bridges based on numerical simulation. Four typical RC bridge piers and two RC bridge structures were considered, of which one was a non‐isolated system and the other was an isolated system, and they were designed according to the seismic design code in Japan. From a total of 250 strong motion records, selected from Japan, the United States, and Taiwan, non‐linear time history analyses were performed, and the damage indices for the bridge structures were obtained. Using the damage indices and ground motion parameters, fragility curves for the four bridge piers and the two bridge structures were constructed assuming a lognormal distribution. It was found that there was a significant effect on the fragility curves due to the variation of structural parameters. The relationship between the fragility curve parameters and the over‐strength ratio of the structures was also obtained by performing a linear regression analysis. It was observed that the fragility curve parameters showed a strong correlation with the over‐strength ratio of the structures. Based on the observed correlation between the fragility curve parameters and the over‐strength ratio of the structures, a simplified method was developed to construct the fragility curves for highway bridges using 30 non‐isolated bridge models. The simplified method may be a very useful tool to construct the fragility curves for non‐isolated highway bridges in Japan, which fall within the same group and have similar characteristics. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Near‐fault spatial variation in strong ground motion due to rupture directivity and hanging wall effects from the Chi‐Chi,Taiwan earthquake     

Khosrow T. Shabestari  Fumio Yamazaki 《地震工程与结构动力学》2003,32(14):2197-2219

  相似文献   

Probabilistic description of the first-order Fermi acceleration in shock waves: time-dependent solution by the single-particle approach     

Tsunehiko N. Kato †  Fumio Takahara 《Monthly notices of the Royal Astronomical Society》2003,342(2):639-650

  相似文献   

Effect of isolation on fragility curves of highway bridges based on simplified approach   总被引：1，自引：0，他引：1  

Kazi Rezaul Karim  Fumio Yamazaki 《Soil Dynamics and Earthquake Engineering》2007,27(5):414-426

The trend of isolating highway bridges is on the rise after the recent large earthquakes in Japan, the United States, and other countries. Recent investigation shows that isolated systems perform well against seismic forces as the substructures of such systems experience less lateral forces due to energy dissipation of the isolation device. Hence, it is anticipated that there might be an effect on fragility curves of highway bridges due to isolation. In this study, 30 isolated bridge models were considered (and they were designed according to the seismic design code of highway bridges in Japan) to have a wider range of the variation of structural parameters, e.g. pier heights, weights, and over-strength ratio of structures. Then, fragility curves were developed by following a simplified procedure using 250 strong motion records, which were selected from 5 earthquake events that occurred in Japan, the USA, and Taiwan. It is observed that the level of damage probability for the isolated system is less than that of the non-isolated one for a lower level of pier height. However, having the same over-strength ratio of the structures, the level of damage probability for the isolated system is found to be higher for a higher level of pier height compared to the one of the non-isolated system. The proposed simple approach may conveniently be used in constructing fragility curves for a class of isolated bridge structures in Japan that have similar characteristics.  相似文献   

砂土应力-应变关系的加载速率效应分析     

彭芳乐  李福林  李建中  龙冈文夫 《岩土力学》2007,28(Z1):16-20

分析研究了两种砂土在排水平面应变压缩PSC试验和不排水三轴压缩TC试验条件下的加载速率效应,既实现了不同恒定应变率加载条件下的试验,也实现了不同的加载阶段采用不同的恒定应变率（即应变率分阶段变化）的试验。在加载速率为不同恒定应变率时,砂土的应力-应变响应是唯一的,与应变率无关。在加载速率分阶段变化时,依据应力-应变关系对应变率突变的响应程度,对砂土的加载速率效应进行了评价。分析结果表明,砂土应力-应变关系的加载速率效应表现为黏性消散特性,在应变率发生突变的瞬间,由于应变加速度的影响,应力-应变曲线也相应地突变并表现为刚度很大,近似弹性的特性,随着应变的进一步增加,这一近似弹性的行为逐渐消失。  相似文献   

Terrestrial – Ocean environmental change in the northwestern Pacific from the glacial times to Holocene     

Hodaka Kawahata  Hideaki Ohshima  Azumi Kuroyanagi 《Journal of Asian Earth Sciences》2011,40(6):430-1202

The Mixed Water Region (MWR) between the Oyashio Current and the Kuroshio Extension and surrounding terrestrial region have been affected by the global climatic change. The sedimentary core KR02-15 PC6 collected at 40°23.8871′N, 143°29.8663′E in the MWR provides detailed records of pollen and spores and alkenone sea surface temperature (SST) during the last 15 kyr, showing that both ocean and terrestrial environments have been appreciably linked. Abundance of Picea, a proxy for terrestrial cool climate, fluctuated, coinciding with the alkenone-SST change during the interstadial period (15.0–7.7 cal kyr B.P.). Alkenone-SST increased to the modern level at 8.0 cal kyr B.P. and remained almost constant until 2.0 kyr B.P. while the terrestrial warming still continued until 4.0 cal kyr B.P. The rainfall under terrestrial warm condition increased gradually from 7.9 cal kyr B.P. and rapidly from 2.0 cal kyr B.P. Both terrestrial and marine environments cooled down during the last 2 kyr possibly due to the intensified cold Oyashio Current.  相似文献   

Sea-ice retreat in the Sea of Okhotsk and the ice–ocean albedo feedback effect on it     

Sohey Nihashi  Kay I. Ohshima  Haruka Nakasato 《Journal of Oceanography》2011,67(5):551-562

Sea-ice retreat processes are examined in the Sea of Okhotsk. A heat budget analysis in the sea-ice zone shows that net heat flux from the atmosphere at the water surface is about 77 W m⁻² on average in the active ice melt season (April) due to large solar heating, while that at the ice surface is about 12 W m⁻² because of the difference in surface albedo. The temporal variation of the heat input into the upper ocean through the open water fraction corresponds well to that of the latent heat required for ice retreat. These results suggest that heat input into the ice–upper ocean system from the atmosphere mainly occurs at the open water fraction, and this heat input into the upper ocean is an important heat source for ice melting. The decrease in ice area in the active melt season (April) and the geostrophic wind just before the melt season (March) show a correlation: the decrease is large when the offshoreward wind is strong. This relationship can be explained by the following process. Once ice concentration is decreased (increased) by the offshoreward (onshoreward) wind just before the melt season, solar heating of the upper ocean through the increased (decreased) open water fraction is enhanced (reduced), leading to (suppressing) a further decrease in ice concentration. This positive feedback is regarded as the ice–ocean albedo feedback, and explains in part the large interannual variability of the ice cover in the ice melt season.  相似文献   

Investigation of cutting methods for small samples of Hayabusa and future sample return missions     

Masayuki Uesugi  Ryo Noguchi  Tooru Matsumoto  Junya Matsuno  Takashi Nagano  Akira Tsuchiyama  Shigenori Harada  Kaori Yokoyama  Yoshiaki Yodo  Noboru Takeda  Toru Yada  Shogo Yakame  Yuzuru Karouji  Yukihiro Ishibashi  Masanao Abe  Tatsuaki Okada  Akio Fujimura  Mitsuru Ebihara  Fumio Kitajima  Keisuke Nagao  Tomoki Nakamura  Hiroshi Naraoka  Takaaki Noguchi  Ryuji Okazaki  Hisayoshi Yurimoto 《Meteoritics & planetary science》2014,49(7):1186-1201

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.  相似文献