Middle-Late Pleistocene polycyclic evolution of a stable coastal area (southern Apulia, Italy)     

Giuseppe Mastronuzzi  Yves Quinif  Paolo Sans  Gianluca Selleri 《Geomorphology》2007,86(3-4):393-408

The Otranto–Leuca coastal tract is marked by the presence of numerous sea caves placed close to present sea level. They are located generally at the back of a shore platform covered by a sequence of breccia deposits, marine sediments and speleothems. At Grotta di Masseria dell'Orte, marine cemented sands rest on a narrow shore platform at about 6.2 m above mean sea level and are covered by speleothems older than 185 ka. At Grotta del Diavolo, which is mostly filled by breccia deposits, three beach levels have been detected at about 3.0, 3.5 and 5.9 m above msl. They are either covered by or overlie speleothems that yield an U/Th age of 340, 78 ka and between 170.3 and 146.5, respectively. Geomorphological evidence and radiometric ages indicate that the area after a period of uplift has been tectonically stable since the last part of the Middle Pleistocene so that marine landforms close to the present shoreline underwent a polycyclic evolution. The sedimentary fills of sea caves formed during Middle-Late Pleistocene glacial stages, when arid or semiarid conditions promoted the removal of regolith and the development of thick breccia deposits. During Marine Isotope Stages (MIS) 9.3, 5.5 and 5.1, cave sediments were partially eroded whereas beach layers and related speleothems developed. These are, in fact, the only marine isotope stages marked by a sea level position which in this Mediterranean region was either close to, or slightly higher than, the present one.  相似文献   

The meteoritic origin of Tutankhamun's iron dagger blade          下载免费PDF全文

Daniela Comelli  Massimo D'orazio  Luigi Folco  Mahmud El‐Halwagy  Tommaso Frizzi  Roberto Alberti  Valentina Capogrosso  Abdelrazek Elnaggar  Hala Hassan  Austin Nevin  Franco Porcelli  Mohamed G. Rashed  Gianluca Valentini 《Meteoritics & planetary science》2016,51(7):1301-1309

Scholars have long discussed the introduction and spread of iron metallurgy in different civilizations. The sporadic use of iron has been reported in the Eastern Mediterranean area from the late Neolithic period to the Bronze Age. Despite the rare existence of smelted iron, it is generally assumed that early iron objects were produced from meteoritic iron. Nevertheless, the methods of working the metal, its use, and diffusion are contentious issues compromised by lack of detailed analysis. Since its discovery in 1925, the meteoritic origin of the iron dagger blade from the sarcophagus of the ancient Egyptian King Tutankhamun (14th C. BCE) has been the subject of debate and previous analyses yielded controversial results. We show that the composition of the blade (Fe plus 10.8 wt% Ni and 0.58 wt% Co), accurately determined through portable x‐ray fluorescence spectrometry, strongly supports its meteoritic origin. In agreement with recent results of metallographic analysis of ancient iron artifacts from Gerzeh, our study confirms that ancient Egyptians attributed great value to meteoritic iron for the production of precious objects. Moreover, the high manufacturing quality of Tutankhamun's dagger blade, in comparison with other simple‐shaped meteoritic iron artifacts, suggests a significant mastery of ironworking in Tutankhamun's time.  相似文献   

Seaward dipping reflectors along the SW continental margin of India: Evidence for volcanic passive margin     

K. K. Ajay  A. K. Chaubey  K. S. Krishna  D. Gopala Rao  D. Sar 《Journal of Earth System Science》2010,119(6):803-813

Multi-channel seismic reflection profiles across the southwest continental margin of India (SWCMI) show presence of westerly dipping seismic reflectors beneath sedimentary strata along the western flank of the Laccadive Ridge — northernmost part of the Chagos-Laccadive Ridge system. Velocity structure, seismic character, 2D gravity model and geographic locations of the dipping reflectors suggest that these reflectors are volcanic in origin, which are interpreted as Seaward Dipping Reflectors (SDRs).  相似文献   

Sedimentation in the Northern Apennines–Corsica tectonic knot (Northern Tyrrhenian Sea,Central Mediterranean): offshore drilling data from the Elba–Pianosa Ridge     

Gianluca Cornamusini  Vincenzo Pascucci 《International Journal of Earth Sciences》2014,103(3):821-842

The Northern Tyrrhenian Sea is located on the collisional zone between the Alpine Corsica and the Northern Apennines and is a key area for gaining a better understanding of the complex relationships between these two systems. The knowledge of the wide offshore part of this zone, located between Corsica (France) and mainland Italy, is based primarily on the analysis of several seismic profiles tied to the outcropping geology and unpublished preliminary reports of few offshore wells. The here presented study of two offshore wells provides a revision of the sedimentology, biostratigraphy and petrography of the thick, mainly siliciclastic, Tertiary successions (about 3,600 m) composing the Elba–Pianosa Ridge (EPR), a structural/morphological high separating the Tuscan Shelf to the east from the Corsica Basin to the west. A comparison with similar deposits cropping out in the surrounding onshore areas (Northern Apennines, Corsica, Tuscan Archipelago, Piedmont Tertiary Basin) provides additional constraints for refinement of the complex geodynamic and regional setting in which the EPR evolved.  相似文献   

Infiltration effects on a two-dimensional molecular dynamics model of landslides     

Gianluca Martelloni  Franco Bagnoli 《Natural Hazards》2014,73(1):37-62

We propose a two-dimensional computational model for deep landslides triggered by rainfall, based on interacting particles or grains. The model describes a vertical section of a fictitious granular material along a slope, in order to study the behavior of a wide-thickness landslide. The triggering of the landslide is caused by the exceeding of two conditions: a threshold speed and a condition on the static friction of the particles, the latter based on the Mohr–Coulomb failure criterion (Coulomb in Mem Acad R Div Sav 7:343–387, 1776; Mohr in Abhandlungen aus dem Gebiete der Technischen Mechanik. Ernst, Berlin, 1914). The interparticle interactions are represented as a potential that, in the absence of suitable experimental data and due to the arbitrariness of the grain dimension, is modeled similarly to the Lennard-Jones’ one (Lennard-Jones in Proc R Soc Lond A 106(738):463–477, 1924), i.e., with an attractive and a repulsive part. For the updating of the particle positions, we use a molecular dynamics method, which is quite suitable for this type of systems (Herrmann and Luding in Continuum Mech Thermodyn 10:189–231, 1998). An infiltration scheme is introduced for modeling the increasing pore pressure due to the rainfall. Finally, we also introduce the viscosity in the dynamical equations of motion. The statistical characterization and dynamical behavior of the results of simulations are quite satisfactory relative to real landslides: We obtain a power law distribution of landslide triggering times, and the velocity patterns are typical of real cases, including the acceleration progression. Therefore, we can claim that this type of modeling can represent a new method to simulate landslides triggered by rainfall.  相似文献   

WORKSHOP ON PALAEOSEISMOLOGY, 18–22 SEPTEMBER 1994, MARSHALL, CA, USA     

Gianluca Valensise 《地学学报》1995,7(2):111-111

  相似文献   

High-pressure X-ray and Raman study of a ferrian magnesian spodumene     

G. Diego Gatta  Tiziana Boffa Ballaran  Gianluca Iezzi 《Physics and Chemistry of Minerals》2005,32(2):132-139

The high-pressure behaviour of a synthetic P2₁/c ferrian magnesian spodumene, ^M2 (Li_0.85Mg_0.09Fe²⁺ _0.06)^M1(Fe³⁺ _0.85Mg_0.15)Si₂O₆, has been investigated using in situ single-crystal X-ray diffraction and Raman spectroscopy. No phase transition has been observed within the pressure range investigated. The isothermal equation of state up to 7 GPa was determined. V₀, K_T0 and K, simultaneously refined with a Murnaghan equation of state, are: V₀= 415.66(7) ų, K_T0=83(1) GPa and K=9.6(6). The magnitudes of the principal unit-strain coefficients were calculated and their ratios 1:2:3=1.00:1.85:2.81 at P=6.83 GPa indicate a very strong anisotropy. Monitoring of the intensity of b-type reflections (h+k= 2n+1) confirms that from room conditions up to 7 GPa the primitive lattice is maintained. Raman spectra have been collected up to 7.4 GPa. No change in the number of observed vibrational modes occurs in the pressure range investigated. At high frequency, the Raman doublet relative to the Si–O–Si vibrations of the two distinct tetrahedral chains is a broad band at room pressure, however, the frequency difference between the two modes increases with increasing pressure.Operating system: Windows NT  相似文献   

New geomorphic evidence for anticlinal growth driven by blind-thrust faulting along the northern Marche coastal belt (central Italy)   总被引：2，自引：0，他引：2  

Paola Vannoli  Roberto Basili  Gianluca Valensise 《Journal of Seismology》2004,8(3):297-312

The Northern Marche coastal belt is characterised by a series of NW-SE trending, NE verging folds forming the easternmost edge of the Apennines thrust front. Several geomorphic features suggest that the folds are still growing and hence that the thrust front is active. The occurrence of several historical and instrumental earthquakes (e.g. 1672, 1690, 1786, 1875, 1916, 1930, 1972, all having M_e 5.2) suggests that the thrust faults are also seismogenic.We performed a geomorphological analysis to identify and characterise the faults driving the active folds. Our approach assumes that anomalous drainage patterns and deformed Middle-Late Pleistocene alluvial and coastal terraces are indicators of the vertical component of tectonic strain. We identified, mapped and correlated with sea-level fluctuations a sequence of alluvial and coastal terraces. Longitudinal profiles of six rivers (Conca, Foglia, Metauro, Cesano, Misa, and Esino) show that terraces (1) consistently converge downstream, suggesting that they result from regional uplift that dies out near the coast, and (2) some are slightly warped where they cross anticline axes. We interpreted as coastal terraces several land-surface remnants arranged parallel to the present coastline. Lower remnants clearly top off gently landward-tilted coastal deposits. Reconstructed coastal terraces also seem to be tectonically warped.Our results help characterise the geometry and segmentation of a system that generated the largest earthquakes of the region and suggest the loci of potential seismic gaps. We conclude that the earthquake potential of the densely populated northern Marche coastal belt may be substantially higher than currently estimated.  相似文献   

The crystal chemistry of lithium and Fe3+ in synthetic orthopyroxene     

Fernando Cámara  Gianluca Iezzi  Massimo Tiepolo  Roberta Oberti 《Physics and Chemistry of Minerals》2006,33(7):475-483

Lithian ferrian enstatite with Li₂O = 1.39 wt% and Fe₂O₃ 7.54 wt% was synthesised in the (MgO–Li₂O–FeO–SiO₂–H₂O) system at P = 0.3 GPa, T = 1,000°C, fO₂ = +2 Pbca, and a = 18.2113(7), b = 8.8172(3), c = 5.2050(2) Å, V = 835.79(9) Å³. The composition of the orthopyroxene was determined combining EMP, LA-ICP-MS and single-crystal XRD analysis, yielding the unit formula ^M2(Mg_0.59Fe _0.21 ²⁺ Li_0.20) ^M1(Mg_0.74Fe _0.20 ³⁺ Fe _0.06 ²⁺ ) Si₂O₆. Structure refinements done on crystals obtained from synthesis runs with variable Mg-content show that the orthopyroxene is virtually constant in composition and hence in structure, whereas coexisting clinopyroxenes occurring both as individual grains or thin rims around the orthopyroxene crystals have variable amounts of Li, Fe³⁺ and Mg contents. Structure refinement shows that Li is ordered at the M2 site and Fe³⁺ is ordered at the M1 site of the orthopyroxene, whereas Mg (and Fe²⁺) distributes over both octahedral sites. The main geometrical variations observed for Li-rich samples are actually due to the presence of Fe³⁺, which affects significantly the geometry of the M1 site; changes in the geometry of the M2 site due to the lower coordination of Li are likely to affect both the degree and the kinetics of the non-convergent Fe²⁺-Mg ordering process in octahedral sites.  相似文献   

The Utilization and Modeling of Photo-Fenton Process as a Single Unit in Textile Wastewater Treatment     

Bülent Sarı  Selman Türkeş  Hakan Güney  Olcayto Keskinkan 《洁净——土壤、空气、水》2023,51(1):2100328

Studies on the direct application of the photo-Fenton process (PFOP) to disinfect and decontaminate textile wastewater are rare. The output of the artificial neural network (ANN) models applied to the wastewater of a textile factory producing woven fabrics, which is used to assess the efficiency of the PFOP process, are investigated and compared with each other in this study. The highest PFOP efficiency is obtained at a pH of 3. Chemical oxygen demand (COD), suspended solids (SS) and color removal rates are 94%, 90%, and 96%, respectively. The data are modeled with ANNs and nonlinear external input autoregressive ANNs (NARX-ANN) using the MATLAB R2020a software program. Both Levenberg–Marquardt (trainlm) and scaled conjugate gradient (trainscg) algorithms are employed in the ANN and NARX-ANN models, whereas hyperbolic tangent sigmoid (Tansig) and logistic sigmoid (Logsig) functions are superimposed on the hidden layer in the ANN model, and Tansig functions are superimposed on the NARX-ANN model. It is determined that the developed ANN models are more effective in estimating the PFOP efficiency. The mean squared error is 0.000 953, and the coefficient of determination (R²) is 0.96 661.  相似文献