1979年夏末欧亚上空的温度变化     

丁一汇  T.伊鸠树也  T.村上多喜雄 《大气科学》1983,7(1):1-12

在1979年夏末,15°N以北的欧亚地区温度分布发生了显著的变化。在300mb上,大约8月23日欧亚地区沿 20°—25°N平均的纬向平均温度急剧地减小。南亚(50°—100°E)夏季风的撤退是造成这种纬向平均温度减小的重要原因。300mb纬向平均温度的突然减小在8月18日也发生在中纬度大范围地区(40°—55°N),这比南亚夏季风的撤退约早5天左右。 在夏到秋的过渡时期,南北方向垂直环流的强度和位置在欧亚地区也经历了明显变化。在20—25°N,过渡时期(8月18—27日)纬向平均的上升气流明显减弱。减弱的综向平均加热率可能是造成这种减小的主要因子。在45°N,过渡期纬向平均的下沉气流和冷却(辐射)率显著增加有关。 在15°N附近,300mb近于以40天周期准周期地脉动。这种脉动似与40天过滤的绝热冷却(加热)和欧亚平均经圈环流有关的非绝热加热(冷却)之间小的不平衡有联系。  相似文献   

Fractionated Ilmenite-series Granites in Southwest Japan: Source Magma for REE-Sn-W Mineralizations     

Shunso Ishihara  Hiroyasu Murakami 《Resource Geology》2006,56(3):245-256

Abstract. Various leucocratic biotite granites, low-temperature I-type, from the middle zone of the Sanyo ilmenite-series granitic terrane were studied chemically. These granites are locally associated with REE-Sn-W mineralizations, and were compared with unmineralized granites and batholithic Ryoke granites in three areas of the Chubu, Kinki and Chugoku Districts. They are unique in the region because they have extremely low ferromagnesian components but high Rb/Sr and 10000Ga/Al ratios. These granites are divided petrographically into the main phase, finer-grained marginal phase and younger sheets and dikelets. These rocks have increasing of HREE+Y and Nb+Ta contents in this order, which is also followed by decreasing zircon saturation temperature from 780 to 725C. Together with the mode of occurrence of these granites, the leucogranitic magmas are considered to have formed by in-situ fractionation of the host granitic magmas near the top of the magma chambers. The concentration of HREE, Y, Nb and Ta in these Sanyo Belt leucogranites is principally controlled by magmatic fractionation.  相似文献   

Resource Evaluation and Some Genetic Aspects of Indium in the Japanese Ore Deposits   总被引：7，自引：1，他引：7  

Shunso Ishihara    Kenichi Hoshino  Hiroyasu Murakami  Yuji Endo 《Resource Geology》2006,56(3):347-364

Abstract. There have been two primary sources for industrial indium; one from massive sulfides, while the other is dissemination-veins and skarns, related to felsic igneous rocks. The latter group of the In-bearing deposits is abundant in the Japanese Islands. Indium occurs as In-minerals such as sakuraiite, roquesite, laforetite and many unidentified minerals, but the majority is contained as an impurity in sphalerite, and tin and copper sulfides. Average grades of the ores from which indium has been extracted vary from a few ppm (e.g., Kosaka mine) to more than 300 ppm (Toyoha mine). The amount of indium in all the major basemetal deposits is estimated by analyzing representative samples. The main indium deposits are subvolcanic and tin-poly-metallic vein types. The largest one is Toyoha mine (4,700 tons hi) and the Ashio mine (ca. 1,200 tons In) was found to be the second largest. Many small occurrences, were recognized in the Miocene magnetite-series belt, besides the classic occurrences in the ilmenite-series granitic terrains of SW Japan, including the Ikuno and Akenobe tin(-tungsten) polymetallic veins, located in the northern margin of the late Cretaceous Sanyo ilmenite-series province. Magnetite-series magmas with deep source are necessary to concentrate sulfur in the magma chamber but sedimentary source rocks and their reducing agents are needed to collect and to precipitate indium. The Japanese islands are essentially accretionary terrains intruded by various deep oxidized magmas; thus forming magnetite/ilmenite-series paired belts, which are sometimes mixed. This unique geologic setting may be the most fundamental reason why indium is rich in vein-type deposits of the Japanese Island arcs.  相似文献   

Geology, Wall-rock Alteration and Vein Paragenesis of the Bilimoia Gold Deposit, Kainantu Metallogenic Region, Papua New Guinea     

Joseph Onglo Espi    Ken-Ichiro Hayashi    Kosei Komuro    Hiroyasu Murakami  Yoshimichi Kajiwara 《Resource Geology》2007,57(3):249-268

The Bilimoia deposit (2.23 Mt, 24 g/t Au), located in the eastern Central Mobile Belt of mainland Papua New Guinea, is composed of fault‐hosted, NW–NNW‐trending Irumafimpa–Kora and Judd–Upper Kora Au‐quartz veins hosted by Middle–Late Triassic basement that was metamorphosed to medium‐grade greenschist facies between Middle–Late Triassic and Early–Middle Jurassic. Mineralizing fluids were introduced during crustal thickening, rapid uplift, change of plate motions from oblique to orthogonal compression, active faulting and S₃ and S₄ events in an S₁–S₄ deformation sequence. The Bilimoia deposit is spatially and temporally related to I‐type, early intermediate to felsic and late mafic intrusions emplaced in Late Miocene (9–7 Ma). Hydrothermal alteration and associated mineralization is divided into 10 main paragenetic stages: (1) chlorite–epidote‐selvaged quartz–calcite–specularite vein; (2) local quartz–illite–pyrite alteration; (3) quartz–sericite–mariposite–fuchsite–pyrite wall‐rock alteration that delimits the bounding shears; (4) finely banded, colloform‐, crustiform‐ and cockade‐textured and drusy quartz ± early wolframite ± late adularia; (5) hematite; (6) pyrite; (7) quartz ± amethyst‐base metal sulfides; (8) quartz–chalcopyrite–bornite–Sn and Cu sulfides–Au tellurides and Te ± Bi ± Ag ± Cu ± Pb phases; (9) Fe ± Mn carbonates; and (10) supergene overprint. Fluid inclusions in stage 4 are characterized by low salinity (0.9–5.4 wt% NaCl equivalent), aqueous–carbonic fluids with total homogenization temperatures ranging from 210 to 330°C. Some of the inclusions that homogenized between 285 and 330°C host coexisting liquid‐ and vapor‐rich (including carbonic) phases, suggesting phase separation. Fluid inclusions in quartz intergrown with wolframite have low salinity (0.9–1.2 wt% NaCl equivalent), aqueous–carbonic fluids at 240–260°C, defining the latter’s depositional conditions. The ore fluids were derived from oxidized magmatic source initially contaminated by reduced basement rocks. Wall‐rock alteration and involvement of circulating meteoric waters were dominant during the first three stages and early part of stage 4. Stage 5 hematite was deposited as a result of stage 4 phase separation or entrainment of oxygenated groundwater. Gold is associated with Te‐ and Bi‐bearing minerals and mostly precipitated as gold‐tellurides during stage 8. Gold deposition occurred below 350°C due to a change in the sulfidation and oxidation state of the fluids, depressurization and decreasing temperature and activities of sulfur and tellurium. Bisulfides are considered to be the main Au‐transporting complexes. The Bilimoia deposit has affinities that are similar to many gold systems termed epizonal orogenic and intrusion‐related. The current data allow us to classify the Bilimoia deposit as a fault‐controlled, metamorphic‐hosted, intrusion‐related mesothermal to low sulfidation epithermal quartz–Au–Te–Bi vein system.  相似文献   

Temperature distribution of the upper surface of the subducted Philippine Sea Plate along the Nankai Trough, southwest Japan, from a three-dimensional subduction model: relation to large interplate and low-frequency earthquakes   总被引：1，自引：0，他引：1  

Shoichi Yoshioka  Koji Murakami 《Geophysical Journal International》2007,171(1):302-315

  相似文献   

Does heavy oil pollution induce bacterial diseases in Japanese flounder Paralichthys olivaceus?     

Song JY  Nakayama K  Murakami Y  Jung SJ  Oh MJ  Matsuoka S  Kawakami H  Kitamura S 《Marine pollution bulletin》2008,57(6-12):889-894

As basic research for the effect of heavy oil on the fish immune system, in this study, the number of leukocyte was counted in Japanese flounder Paralichthys olivaceus, after exposure to heavy oil at a concentration of 30 g/8L for 3 days. To compare the numbers of bacteria in the skin mucus between oil-exposed and control fish, viable bacteria were enumerated by counting colony forming unit (CFU). Compared with 5.79+/-1.88 x 10(7)leukocytes/mL in the controls, the exposed fish demonstrated higher counts, averaging 1.45+/-0.45 x 10(8)cells/mL. The bacterial numbers of control fish were 4.27+/-3.68 x 10(4)CFU/g, whereas they were 4.58+/-1.63 x 10(5)CFU/g in the exposed fish. The results suggest that immune suppression of the fish occurred due to heavy oil stressor, and bacteria could invade in the mucus, resulting in the increasing leukocyte number to prevent infectious disease.  相似文献   

Primary productivity and solar radiation off Sanriku in May 1997     

Akihiro Shiomoto  Shinji Hashimoto  Takayuki Murakami 《Journal of Oceanography》1998,54(5):539-544

We measured the in situ primary production at four stations from the surface to 80 m off Sanriku in late May 1997. The depth-integrated daily primary production in the upper 80 m was estimated to be 391, 468, and 855 mgC m⁻²d⁻¹ in water from the Oyashio, and 336 mgC m⁻²d⁻¹ in the warm-core ring. The variation in the primary production was primarily due to the variation in phytoplankton activity (chlorophyll α-specific primary production). A combination of previous and present studies in water from the Oyashio and the warm-core ring suggested that phytoplankton activity is proportional to light intensity between 12 and 50 Ein m⁻²d⁻¹ which is close to the usual light condition (61–75 Ein m⁻²d⁻¹) off Sanriku in May and June. Light may be a limiting factor for phytoplankton off Sanriku in late spring and early summer.  相似文献   

Mitigation of earthquake-induced damage of breakwater by geogrid-reinforced foundation     

Babloo Chaudhary  Hemanta Hazarika  Akira Murakami  Kazunori Fujisawa 《Marine Georesources & Geotechnology》2018,36(7):827-840

A strong earthquake often precedes a tsunami, and a breakwater may settle during the earthquake. Such seismic subsidence of the breakwater may reduce its ability to block the tsunami, and the tsunami may easily enter coastal areas by overflowing it. This study deals with the instability of a breakwater due to an earthquake. In addition, to protect a breakwater from damage caused by an earthquake, a new concept of using geogrid for reinforcing the foundation of a breakwater is introduced. To determine the behavior of unreinforced foundation and to evaluate the effectiveness of the proposed reinforced foundation under different earthquake loadings, a series of shaking table tests were performed. It was observed that the earthquake generated excess pore water pressures and deformations of foundation ground were main reasons of failure of the breakwater. The reinforced foundation was found effective to reduce the earthquake-induced damage of the breakwater, and finally it makes the breakwater resilient against earthquake-induced forces. Numerical simulations were also performed to elucidate the mechanism of reinforcement–breakwater–soil–water system under different earthquake loadings.  相似文献   

电阻率/激发极化率数据的二维反演程序   总被引：25，自引：2，他引：23  

阮百尧  村上裕  徐世浙 《物探化探计算技术》1999,21(2):116-125

本程序在目前日本流行的电阻率／激发极化法二维反演程序［４］基础上,将电导率和极化率分块均匀变为分块连续变化,并在目标函数中加入了更多的先验信息,使反演结果的唯一性和真实性大大增加。在有限元正演模拟中,又采用三角单元剖分,使实测数据在反演以前不需要进行地形改正。本文介绍了该方法的基本原理和程序的使用方法,并给出了几个理论算例和野外实例  相似文献   

Roles of vertical turbulent mixing in the ocean response to Typhoon Rex (1998)     

Akiyoshi Wada  Hiroshi Niino  Hideyuki Nakano 《Journal of Oceanography》2009,65(3):373-396

How the role of vertical turbulent mixing (VTM) in sea surface cooling (SSC) varies with the moving speed of a tropical cyclone was examined for Typhoon Rex (1998) by using the Meteorological Research Institute Community Ocean Model (MRI.COM). The MRI.COM well reproduced TRMM/TMI three-day mean sea surface temperature (SST) fields along Rex’s track. During the fast-moving phase of Rex, SSC simulated by the MRI.COM was caused by shear-induced VTM on the right side of the track. During the slowly-moving phase, on the other hand, the Ekman-pumping area mostly overlapped the VTM area right behind Rex’s center. During the recurvature phase, cool water transported by the upwelling was more efficiently entrained into a mixed layer by the VTM for nearly a 1 near-inertial period after the passage of Rex. We then modified the entrainment formulation of Deardorff (1983), which was incorporated into a slab mixed-layer ocean model (SOM) so as to fit to the results simulated by the MRI.COM. The principal modifications are as follows: (1) consideration of turbulent kinetic energy (TKE) production caused by surface wave breaking; (2) increase in the coefficient for estimating dissipation to balance with TKE production due to turbulent transport; and (3) changing the initial guess for the critical Richardson number. These modifications led to an improvement of SST simulations by the SOM. The impact of the modifications on simulated SSTs turned out to be more significant than the impacts of initial mixed-layer depth and the difference between diurnally-varying and daily mean short-wave radiation.  相似文献