The Effect of Concrete Deformation on Displacement of an Axially Loaded Drilled Shaft     

Dongwook Kim  Hobi Kim  Kyung Joon Shin 《Marine Georesources & Geotechnology》2016,34(2):116-126

This article presents the settlement of drilled shafts resulting from their structural deformations. Although drilled shafts are widely used as foundations for settlement-sensitive structures such as bridges and high-rise buildings, the structural deformations of drilled shafts are not typically taken into account in the design process. However, if unexpected structural deformations of drilled shafts cause additional settlement to the foundation, the serviceability of the superstructure can be jeopardized. Unfortunately, very few research efforts have been made to quantify the structural deformation of drilled shafts; this needs to be addressed to accurately predict the settlement of drilled shafts. In this study, we investigate the effect of structural deformation on displacement of axially loaded drilled shafts. Finite element analyses were performed to quantify the structural deformation of drilled shafts. The analysis results indicated that the structural deformation of drilled shafts could be quite significant for long drilled shafts. The main factors that affected the structural deformation of drilled shafts were found to be pile length, the material properties of drilled shafts, and the relative humidity of surrounding soil. An approximate equation is proposed to estimate the long-term deformation of drilled shafts.  相似文献   

Thermal effects on the growth and fatty acid composition of four harmful algal bloom species: Possible implications for ichthyotoxicity     

Bonggil Hyun  Se-Jong Ju  Ah-Ra Ko  Keun-Hyung Choi  Seung Won Jung  Pung-Guk Jang  Min-Chul Jang  Chang Ho Moon  Kyoungsoon Shin 《Ocean Science Journal》2016,51(3):333-342

Little is known regarding how harmful algal bloom species respond to different temperatures in terms of fatty acid production. This study examined the effects of temperature on the growth rates, cell volumes, and fatty acid concentrations and compositions of four harmful algal bloom species (HABs), Akashiwo sanguinea, Alexandrium tamarense, Chattonella ovata, and Prorocentrum minimum. The HABs species were cultured at 15, 20, 25, and 30°C in a nutrient-enriched medium. Three of the species maintained optimal growth rates over a wide range of temperatures, but A. tamarense did not. The cell volumes of each species showed little change over the temperature range. The total fatty acid concentrations in A. sanguinea, A. tamarense and C. ovata decreased as the temperature increased, but P. minimum showed no trend in this respect. Polyunsaturated fatty acids (PUFAs), the key biochemical components that maintain cell membrane fluidity and which are associated with toxicity, decreased in both concentration and proportion of total fatty acids as temperature increased, except in A. sanguinea, in which the proportion of PUFAs to the total fatty acids increased. These reductions in PUFA concentration and proportion could reduce cell membrane fluidity and toxicity in HABs; however, enhanced growth and/or ruptured cells, which are considered more toxic than intact cells, could compensate for the reduced per-cell toxicity. This phenomenon might impact on the marine ecosystem and aquaculture industry.  相似文献   

Effect of twine thickness on size-selectivity of driftnet for the yellow croaker <Emphasis Type="Italic">Larimichthys polyactis</Emphasis> in southwestern Sea of Korea     

Seonghun Kim  Jihyun Lim  Kyounghoon Lee  Seongwook Park 《中国海洋湖沼学报》2016,34(6):1199-1208

In order to determine the effect of twine thickness on the size-selectivity of the driftnet used for the yellow croaker, size-selectivity tests were conducted with three different twine thicknesses (monofilament diameters of 0.279 mm (number’s method; No. 3), 0.321 mm (No. 4), and 0.360 mm (No. 5)) of driftnets for the yellow croaker in the seas around Chooja-do, Jeju Islands. The selectivity curve was estimated by using Kitahara’s method. In order to determine the physical properties of the twine used in the experimental fishing nets, we measured the breaking load, elongation, and stiffness under both dry and wet conditions. In terms of physical properties, the thinnest twine (No. 3) had the strongest breaking strength per unit cross-sectional area, along with good elongation and excellent flexibility. The thickest twine (No. 5) had the lowest flexibility. In terms of selectivity, the net of No. 3 twine showed the broadest selection range and, thus, a relatively low selectivity compared with the other nets, while the less flexible net of No. 5 twine showed the narrowest selectivity range and high selectivity. In addition, it was found that a thicker twine resulted in a smaller haul of small fish. Therefore, it can be inferred that the thickness of the twine affects the size of the catch and selectivity, and thus the size composition of the catch as well.  相似文献   

A New Reference Material for Tritium Organic Molecules in Sediment: Results of an International Intercomparison Exercise          下载免费PDF全文

Phillip E. Warwick  Ian W. Croudace  Richard M. Marsh  Nicolas Baglan  Sang Bog Kim 《Geostandards and Geoanalytical Research》2018,42(2):253-262

Solid matrix ³H reference materials are challenging to prepare given the volatile nature of ³H and are often unrepresentative of the range of ³H forms that may be encountered during routine analysis. As a result, few ³H reference materials are currently available, undermining verification of analytical techniques for environmental ³H measurement. To address this, an International Working Group on Organically‐Bound Tritium Analysis determined to produce a tritium natural matrix reference material (NMRM). The reference material comprises marine sediment blended with sewage sludge contaminated with ³H‐organic species arising from authorised discharges from a radiopharmaceutical manufacturing site. Previous studies have demonstrated that the ³H species have persisted in the environment over three decades providing valuable supporting data to underpin the characterisation of the NMRM. The preparation and characterisation of the NMRM are described along with the subsequent application of the reference material in an international intercomparison exercise involving nineteen laboratories from nine countries. A reference value of 168 ± 22 Bq kg^?1 was derived from the data arising from the proficiency test.  相似文献   

High-performing antifouling bacterial consortium for submerged membrane bioreactor treating synthetic wastewater     

H. Waheed  S. Pervez  I. Hashmi  S. J. Khan  S.-R. Kim 《International Journal of Environmental Science and Technology》2018,15(2):395-404

Biofouling, associated with membranes, is considered as a major operational challenge in membrane bioreactor (MBR) technology. Interrupting the process for the formation of biofilm by the action of interspecies quorum quenching (QQ) has received a significant attention since recent years. An antifouling bacterial consortium was identified to improve biofouling inhibition performance during MBR operation. For this purpose, various QQ bacteria were isolated from laboratory-scale MBR using enrichment culture method and identified via 16S rRNA. Potential quenching strains including Enterobacter cloaca, Delftia sp., and Pseudomonas sp. were utilized to control biofouling in the MBR operated in the continuous mode for 38 days. Three laboratory-scale MBRs, including two MBRs with different anti fouling consortium and a control, were operated in parallel under similar operating conditions. Biofouling control by QQ bacteria was compared based on the membrane permeability and EPS secretion from biofilm on the membrane. Both MBRs with antifouling consortium (AC-MBRs) experienced around three times less biofouling as compared to conventional MBR leading to significant decrease in acyl homoserine lactones (AHLs) concentration in the biocake. More than 90, 45, and 49% of COD, NH₄–N, and PO₄ ^3?–P removal efficiencies elucidate that QQ bacterial consortium could effectively reduce membrane biofouling without compromising the MBR efficiency. Comparatively lower concentration of bound EPS in AC-MBRs restricted the bacterial adhesion to membrane resulting in enhanced membrane permeability depicting that a broader range of signal molecules could be hydrolyzed using antifouling consortium than single or no QQ strain in the submerged MBR.  相似文献   

Hydrogeochemical Features of Thermal Waters of South Trungbo (Central Vietnam)     

D. A. Novikov  Doan Van Tuyen  Thi Kim Van Phan  N. A. Kharitonova 《Russian Journal of Pacific Geology》2018,12(1):63-79

The results of studying the features of the hydrogeological structure and chemical and isotope composition of thermal waters from the central part of Vietnam that are characterized by intense manifestations of intrusive magmatism are presented. It is established that low–and high–thermal waters with temperature varying within 30–85°C are developed in the area under study. The value of total mineralization of the hydrotherms ranges from 0.05 to 10.05 g/dm³. It is assumed that the circulation of thermal waters that are different in temperature and chemical composition occurs at two levels. The regular change of the hydrotherm composition in the direction from mineralized chloride sodium, including with increased Ca content, to fresh sodium bicarbonate is revealed. The ratio of δ¹⁸O–δ²H isotopes indicates that the water component is based on meteoric water. In the coastal areas, there is an isotope shift towards the ocean waters, which is also confirmed by the hydrogeochemical data. The key factors for forming the chemical composition of the thermal waters in South Trungbo are their genetic type, the interaction processes in the “water–rock–gas–organic substance” system, and their equilibrium–nonequilibrium state.  相似文献   

Assessment of dynamic impact force of debris flow in mountain torrent based on characteristics of debris flow     

Man-Il Kim  Jae-Hwan Kwak  Byung-Sik Kim 《Environmental Earth Sciences》2018,77(14):538

Landslides and debris flows that occur around residential areas are considered, globally, as significant disasters that cause damage to human life and property. With terrain slope defining the flow characteristics of debris flows, flow depth, flow velocity, and impact force vary by time and distance. In particular, when a structure is located in the flow path of debris flows, the flow characteristics of debris flows vary by terrain slope and direction angle. To simulate the flow characteristics of these debris flows, the simulation results obtained by FLO-2D were analyzed with six-stage conditions for the research area. In the analysis, the flow depth, flow velocity, and impact force were estimated on the basis of the outlet of the research area in the presence and absence of structure(s) at certain distances. With this, the variation of the impact force in accordance with the variation of the flow depth of the debris flows was highly similar to the simulation results obtained by FLO-2D, when the correction index (α) of the suggested dynamic impact force equation was 0.3–0.4. There were sections where the estimated value of the impact force was overestimated near the outlet, and it was judged that the fixed values of the terrain factors (width, roughness coefficient, slope, etc.) caused the impact force to be overestimated. However, the correlation analysis showed that the correlation index was above the normal ranges in the suggested dynamic impact force equation for debris flows with the application of the terrain factors.  相似文献   

A review of jet grouting practice and development     

Pierre Guy Atangana Njock  Jun Chen  Giuseppe Modoni  Arul Arulrajah  Yong-Hyun Kim 《Arabian Journal of Geosciences》2018,11(16):459

The jet grouting technique was originally initiated in the UK and progressively developed following the needs for larger geometries, ease of implementation, economic rationality, and better mechanical properties. This paper presents a comprehensive review of the development and practice of jet grouting through some fundamental concepts and relevant case studies. Subsequently, a laboratory testing program is performed to investigate the factors affecting the efficacy of the twin grouting system. The principal objective of this study is to define the suitable conditions for the jet grouting efficacy regarding economic rationality as well as quality control. For the first phase, a particular emphasis is placed on the properties of jet columns, site geological conditions, implementation methods, and the justification of each selected treatment option, while the second phase mainly focuses on the unconfined compressive strength (UCS) tests. It follows that the mono-fluid jet grouting system presents a valuable flexibility in dealing with complex configurations; yet, the double- and triple-fluid systems are more indicated for cases of mass treatments for which large portions of space must be treated and overlapping is fundamentally important for the reliability of the treatment. Furthermore, it was established that the efficacy of the twin-jet method primarily relies on the proper adequacy of some critical parameters, namely, the cement content, the water-cement ratio, and cement slurry-water glass ratio. In spite of some uncertainties inherently related to the technique, the UCS test represents the quintessential laboratory index for evaluating the mechanical properties of grouted elements, deriving jet grouting efficacy and the economics of jet grouts.  相似文献   

Logistic regression model for sinkhole susceptibility due to damaged sewer pipes     

Kiyeon Kim  Joonyoung Kim  Tae-Young Kwak  Choong-Ki Chung 《Natural Hazards》2018,93(2):765-785

The occurrence of anthropogenic sinkholes in urban areas can lead to severe socioeconomic losses. A damaged underground sewer pipe is regarded as one of the primary causes of such a phenomenon. This study adopted the best subsets regression method to produce a logistic regression model that evaluates the susceptibility for sinkholes induced by damaged sewer pipes. The model was developed by analyzing the sewer pipe network as well as cases of sinkholes in Seoul, South Korea. Among numerous sewer pipe characteristics tested as explanatory variables, the length, age, elevation, burial depth, size, slope, and materials of the sewer pipe were found to influence the occurrence of sinkhole. The proposed model reasonably estimated the sinkhole susceptibility in the area studied, with an area value under the receiver-operating characteristics curve of 0.753. The proposed methodology will serve as a useful tool that can help local governments to choose a cavity inspection regime, and to prevent sinkholes induced by damaged sewer pipes.  相似文献   

Estimating urban above ground biomass with multi-scale LiDAR     

Phil Wilkes  Mathias Disney  Matheus Boni Vicari  Kim Calders  Andrew Burt 《Carbon balance and management》2018,13(1):10

  相似文献