Time dependence of organic matter decay and mixing processes in Framvaren, a permanently anoxic fjord in South Norway     

David W. Dyrssen  Per O. J. Hall  Conny Haraldsson  Melissa Chierici  Jens M. Skei  H. Göte östlund 《Aquatic Geochemistry》1996,2(2):111-129

Three different layers have been identified in Framvaren, which has a maximum water depth of 184 m. One oxic layer above the redoxcline at 18–20 m. One anoxic layer from 20 to 100 m which is occasionally ventilated by a flow over the sill (which has a depth of 2.5 m), and finally a stagnant layer below 100 m. Using the release rate of silica from the bottom and measurements of the concentration of HTO it is possible to make some calculations on the annual volume of interleaving in the layers 25–50 m, 50–75 m, and 75–100 m together with the advective flows. Reliable values of the sulfide concentration were obtained by precipitating and weighing HgS together with careful protection of all anoxic water samples with argon. The light yellow color of the precipitate in the depth range 25 to 80 m indicates that the occasional ventilation will cause such reactions as 0.50₂ + H₂S S(colloidal) + H₂O. The elemental sulfur, being stabilized with HS^–, is set free upon the precipitation of HgS. The new data for the concentration of sulfide give an acceptable stoichiometry for the decay reaction of organic matter. This is not the case with the data of Yao and Millero. The mean values for the concentrations of ammonium and phosphate agree with the new data of Yao and Millero. The mol/mol C/N ratio of 10.1 found in trapped material by Naess and coworkers (1988) agrees with the stoichiometry of the dissolved constituents, i.e. C/N = 9.92 ± 0.45. A denitrification reaction is suggested to explain the high values of C/N. The vertical diffusion coefficient at 100 m calculated from the depth profile of silica was 0.92 × 10^–6 m² s^–1 which lies in the range of values given by Fröyland. Finally, the ¹⁴C age of the total dissolved inorganic carbon (Ct) in the water below 90 m was about 1600 years indicating a bioproduction in the period 8000 years B.P. to A.D. 1853 when a channel was opened between the fjord outside (Helvikfjord) and Framvaren.  相似文献   

Nitrogen in fluids effecting retrogression of granulite facies gneisses: a debatable mantle connection     

William E. Glassley  David Bridgwater  Jens Konnerup-Madsen 《Earth and Planetary Science Letters》1984,70(2):417-425

The abundance patterns of nitrogen, and chlorine in retrogressed granulite facies gneisses from southern East Greenland exhibit strong enrichment in the vicinity of small-scale shear zones. Sulfur in the shear zones occurs at the same concentration levels as in the adjacent country rock, but is depleted in the transition zone between shear zone and country rock. Within the shear zone sulfur occurs as sulfate, whereas in the country rock granulites it occurs as sulfide. Recrystallization of rock in the shear zone to scapolite-bearing, hornblende-absent assemblages, along with changes in the major element chemistry, demonstrates that these zones define migration pathways of chemically reactive fluids. Consideration of the computed fluid compositions, and of the mass ratios of chlorine/sulfur and nitrogen/sulfur demonstrate that the fluid equilibrated with continental crust prior to its passage through gneisses in the study area. Previous suggestions have been made that the mantle may act as a source region for nitrogen-rich fluids. However, equilibration of these S-, N- and Cl-rich fluids with crustal material precludes the use of element abundances to identify a mantle signature; the bulk of these fluid constituents must be considered crustal derived.  相似文献   

Rb-sr dating of epithermal vein mineralization stages in the eastern Harz Mountains (Germany) by paleomixing lines   总被引：1，自引：0，他引：1  

Jens Schneider  Udo Haack 《Geochimica et cosmochimica acta》2003,67(10):1803-1819

A method is evaluated that enables the dating of binary isotopic paleomixing in hydrothermal alteration assemblages by iterative reconstruction and regression of corresponding two-component mixing lines from conventional Rb-Sr data. The model has been applied to illite-bearing granulometric fractions of hydrothermally altered sedimentary rocks associated with epithermal vein mineralization in the eastern Harz Mountains, Germany. These veins are characterized by a principal quartz-sulfide stage containing quartz, base metal sulfides, and siderite and a subsequent dominant calcite-fluorite-quartz stage. Rb-Sr analyses were performed on untreated granulometric fractions, HCl-treated residues, corresponding HCl leachates, and cogenetic vein minerals obtained from two silicified rock samples related to the quartz-sulfide and the calcite-fluorite-quartz mineralization, respectively.Neither the untreated nor the HCl-leached fractions of these rock samples yield statistically robust and geochronologically meaningful isochrons. When applying the binary mixing model, however, two well-defined paleomixing lines can be reconstructed for the HCl-treated fractions of the rock samples and associated vein minerals at model ages of 226 ± 1 Ma (quartz-sulfide alteration) and 209 ± 2 Ma (calcite-fluorite-quartz alteration). We examine the significance and reliability of these model ages and the corresponding paleomixing lines by means of statistical and geological criteria and discuss the effects of leaching experiments performed on the granulometric fractions using 1 N HCl as well as the nature and origin of the components dissolved in the acid leachates.Our results suggest that the mixing model provides a successful dating concept for isotopic disequilibrium processes during low-temperature hydrothermal events that produce binary mixtures among newly formed alteration phases.  相似文献   

Lead isotope systematics of vein-type antimony mineralization,Rheinisches Schiefergebirge,Germany: a case history of complex reaction and remobilization processes   总被引：1，自引：0，他引：1  

Thomas Wagner  Jens Schneider 《Mineralium Deposita》2002,37(2):185-197

Mesothermal vein-type Sb mineralization in the Rheinisches Schiefergebirge, Germany, is characterized by two different mineralization styles, which are (1) extensional quartz-stibnite vein systems, and (2) (Cu)-Pb-Sb sulphosalt assemblages in overprinted pre-existing Pb-Zn veins. A detailed Pb isotope study of 52 representative samples from both mineralization types indicates distinct compositional patterns. (Cu)-Pb-Sb sulphosalts (meneghinite, boulangerite, bournonite) formed by reaction/remobilization are characterized by Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb=18.179-18.223), which are identical to the precursor galena (²⁰⁶Pb/²⁰⁴Pb=18.168-18.223). The Pb isotope composition of sulphosalt minerals in these vein systems was controlled by lead inherited from pre-existing galena. Stibnite and Pb-sulphosalts (zinkenite, semseyite, plagionite) formed in quartz-stibnite vein systems display Pb isotope ratios (²⁰⁶Pb/²⁰⁴Pb=18.250-18.354), which are more radiogenic than galenas from Variscan Pb-Zn ore veins (²⁰⁶Pb/²⁰⁴Pb=18.162-18.303). Detailed small-scale investigation of thrust zones hosting Pb-Zn ores and crosscutting quartz-ankerite fissure veins (Ramsbeck deposit) indicates that the Pb isotope compositions of recrystallized (galena) and remobilized phases (boulangerite, semseyite, bournonite) are arranged along a linear trend. This is interpreted as mixing between primary galena with ²⁰⁶Pb/²⁰⁴Pb᜞.206 and overprinting hydrothermal fluids with a more radiogenic composition (²⁰⁶Pb/²⁰⁴Pb⁾.354), expressed by intermediate compositions (²⁰⁶Pb/²⁰⁴Pb=18.256-18.334) of newly-formed sulphosalts. The Pb isotope systematics of the vein-type Sb mineralization is in accordance with a model of Pb extraction from similar crustal sources (Palaeozoic sedimentary sequences) at different times.  相似文献   

Framvaren Fjord as a natural laboratory for examining biogeochemical processes in anoxic environments     

Brent McKee  Jens Skei 《Marine Chemistry》1999,67(3-4)

  相似文献   

Seismotectonics of south-west Dominican Republic using recent data     

Javier Rodriguez  Jens Havskov  Mathilde Bøttger Sørensen  Luis Fernando Santos 《Journal of Seismology》2018,22(4):883-896

The Dominican Republic has a high level of seismic activity, and a new seismic network has been installed to improve the detection of earthquakes. The network has been operated by Instituto Politécnico Loyola since 2012. It uses six new stations of its own, as well as 17 other stations publically available. In this study, we investigate in particular the south-west of the country where no seismic stations have been operating before. We find an area, SE of the Enriquillo Plantain Garden fault (responsible for the 2010 Haiti M7.0 earthquake), with a high seismic activity (M?=?2–4) compared to the surrounding area. This shallow seismicity (except two events around 40 km depth) is not seen in any global catalogs, and it does not seem to be associated with any known faults. However, the region has been under rapid recent uplift since margins between hills and valleys are filled with massive alluvial fans. We made 24 new fault plane solutions using P-polarities and S/P amplitude ratios. The solutions show mainly reverse mechanisms and the P-axis directions are mainly NNE oriented, which is in agreement with a published strain direction from GPS measurements. We conclude that the main cause of the seismicity in our study area is the push of the Beata Ridge against Enriquillo basin and the rest of the Gonave microplate, reflected in the mainly reverse focal mechanisms.  相似文献   

Making the transition from discrete shot records to continuous seismic records and source wavefields,and its potential impact on survey efficiency and environmental footprint     

Stian Hegna  Tilman Klüver  Jostein Lima  Jens F. Wisløff 《Geophysical Prospecting》2019,67(6):1472-1485

A marine seismic method based on continuous source and receiver wavefields has been developed. The method requires continuous recording of the seismic data. The source that may consist of multiple source elements can emit signals continuously while moving. The ideal source wavefield to be used with this method should be as white as possible both in a temporal and a spatial sense to avoid deep notches in the spectrum enabling a stable multi-dimensional deconvolution. White noise has such properties. However, equipment that can generate white noise does not exist. In order to generate a continuous source wavefield that is approaching the properties of white noise using existing equipment onboard marine seismic vessels, individual air-guns can be triggered with short randomized time intervals in a near-continuous fashion. The main potential benefits with the method are to reduce the environmental impact of marine seismic surveys and to improve acquisition efficiency. The peak sound pressure levels are significantly reduced by triggering one air-gun at a time compared to conventional marine seismic sources. Sound exposure levels are also reduced in most directions. Since the method is based on continuous recording of seismic data and the air-guns are triggered based on time and not based on position, there are less vessel speed limitations compared to conventional marine seismic data acquisition. Also, because the source wavefield is spread out in time, the wavefields emitted from source elements in different cross-line positions can be designed such that the emitted wavefield is spatially white in this direction. This means that source elements in multiple cross-line positions can be operated simultaneously, potentially improving the cross-line sampling and/or the acquisition efficiency.  相似文献   

Magnetic Resonance Imaging of Nonaqueous Phase Liquid Distribution in Unconsolidated Soils Using Discriminatory Freezing     

Saeed Kiaalhosseini  Benjamin Kohn  A. Ted Watson  Tom C. Sale  Jens Blotevogel 《Ground Water Monitoring & Remediation》2019,39(2):71-75

Organic contaminants present as nonaqueous phase liquids (NAPLs) in the subsurface often pose a long-term risk to human health and the environment. Investigating the distribution of NAPLs in porous media remains a major challenge in risk assessment and management of contaminated sites. Conventional soil coring and monitoring wells have been widely used over past decades as the primary means of subsurface investigation to determine NAPL extent. Known limitations of conventional approaches have led us to explore an alternative or a complementary technique to provide high-quality information of NAPL source zone architecture. This work advances an imaging tool for a variety of organic NAPL contaminants in unconsolidated soils through magnetic resonance imaging (MRI) of frozen cores. Using trichloroethylene (TCE) and o-xylene as model species, we illustrate that discriminatory freezing of water, while keeping the NAPL in a liquid state, enables high-resolution qualitative delineation of NAPL distribution within porous media. This novel approach may help improve site conceptual models and consequentially lead to highly tailored, more efficient remedial measures.  相似文献   

Grazing impact on forage quality and macronutrient content of rangelands in Qilian Mountains,NW China     

Alina BARANOVA  Jens OLDELAND  WANG Shun-li  Udo SCHICKHOFF 《山地科学学报》2019,(1):43-53

An important indicator of the rangeland health, associated with land degradation, is the ability of semi-natural rangelands to provide forage of sufficient quality for livestock production. In Qilian Mountains(Gansu Province, NW China) biomass production and forage quality are dependent on the seasonality of precipitation and temperature; most of the precipitation falls during summer season, when sheep, goats and yaks graze mountain rangelands. To sustain the rangelands and to improve the management strategies, the assessment of the forage quality should be implemented. The purpose of this research was to study the response of biomass, forage quality and macronutrient content different levels of grazing intensity in Qilian rangelands. We sampled aboveground biomass in the growing seasons in 2012 and 2013 within spring/autumn or summer grazing regimes in two altitudinal zones below and above 3000 m a.s.l.(montane-subalpine and subalpine-alpine respectively). In order to estimate forage quality, biomass was sampled in 1 m × 1 m plots, assigned to the center of 10 ×10 m sites, fromwhich we collected different indicator parameters of rangeland health. Mineral and fiber content of forage biomass was estimated under different levels of grazing intensity with regard to the growing period. It was found that an increase in grazing intensity led to a decrease in dry matter weight. No linearity was observed in the relationship between nutritive value and grazing intensity. The highest fiber content(59.20 %) was found in plots mostly disturbed by grazing. The highest protein(16.30 %) and the lowest fiber(51.30 %) contents were associated with slightly grazing intensity. Concentrations of the mineral elements, such as Zn, P, K and S varied significantly and showed maximum values under low grazing intensity.  相似文献   

The reaction of carbonates in contact with laser-generated,superheated silicate melts: Constraining impact metamorphism of carbonate-bearing target rocks     

Christopher Hamann  Saskia Bläsing  Lutz Hecht  Sebastian Schäffer  Alex Deutsch  Jens Osterholz  Bernd Lexow 《Meteoritics & planetary science》2018,53(8):1644-1686

We simulated entrainment of carbonates (calcite, dolomite) in silicate impact melts by 1-bar laser melting of silicate–carbonate composite targets, using sandstone, basalt, calcite marble, limestone, dolomite marble, and iron meteorite as starting materials. We demonstrate that carbonate assimilation by silicate melts of variable composition is extremely fast (seconds to minutes), resulting in contamination of silicate melts with carbonate-derived CaO and MgO and release of CO₂ at the silicate melt–carbonate interface. We identify several processes, i.e., (1) decomposition of carbonates releases CO₂ and produces residual oxides (CaO, MgO); (2) incorporation of residual oxides from proximally dissociating carbonates into silicate melts; (3) rapid back-reactions between residual CaO and CO₂ produce idiomorphic calcite crystallites and porous carbonate quench products; (4) high-temperature reactions between Ca-contaminated silicate melts and carbonates yield typical skarn minerals and residual oxide melts; (5) mixing and mingling between Ca- or Ca,Mg-contaminated and Ca- or Ca,Mg-normal silicate melts; (6) precipitation of Ca- or Ca,Mg-rich silicates from contaminated silicate melts upon quenching. Our experiments reproduce many textural and compositional features of typical impact melts originating from silicate–carbonate targets. They reinforce hypotheses that thermal decomposition of carbonates, rapid back-reactions between decomposition products, and incorporation of residual oxides into silicate impact melts are prevailing processes during impact melting of mixed silicate–carbonate targets. However, by comparing our results with previous studies and thermodynamic considerations on the phase diagrams of calcite and quartz, we envisage that carbonate impact melts are readily produced during adiabatic decompression from high shock pressure, but subsequently decompose due to heat influx from coexisting silicate impact melts or hot breccia components. Under certain circumstances, postshock conditions may favor production and conservation of carbonate impact melts. We conclude that the response of mixed carbonate–silicate targets to impact might involve melting and decomposition of carbonates, the dominant response being governed by a complex variety of factors.  相似文献