Site Investigation for the Effects of Vegetation on Ground Stability     

John R. Greenwood  Joanne E. Norris  Jo Wint 《Geotechnical and Geological Engineering》2006,24(3):467-481

The procedure for geotechnical site investigation is well established but little attention is currently given to investigating the potential of vegetation to assist with ground stability. This paper describes how routine investigation procedures may be adapted to consider the effects of the vegetation. It is recommended that the major part of the vegetation investigation is carried out, at relatively low cost, during the preliminary (desk) study phase of the investigation when there is maximum flexibility to take account of findings in the proposed design and construction. The techniques available for investigation of the effects of vegetation are reviewed and references provided for further consideration. As for general geotechnical investigation work, it is important that a balance of effort is maintained in the vegetation investigation between (a) site characterisation (defining and identifying the existing and proposed vegetation to suit the site and ground conditions), (b) testing (in-situ and laboratory testing of the vegetation and root systems to provide design parameters) and (c) modelling (to analyse the vegetation effects).  相似文献   

The eastern Tonale fault zone: a ‘natural laboratory’ for crystal plastic deformation of quartz over a temperature range from 250 to 700 °C     

Michael Stipp  Holger Stünitz  Rene Heilbronner  Stefan M. Schmid 《Journal of Structural Geology》2002,24(12)

Near the eastern end of the Tonale fault zone, a segment of the Periadriatic fault system in the Italian Alps, the Adamello intrusion produced a syn-kinematic contact aureole. A temperature gradient from 250 to 700 °C was determined across the Tonale fault zone using critical syn-kinematic mineral assemblages from the metasedimentary host rocks surrounding deformed quartz veins. Deformed quartz veins sampled along this temperature gradient display a transition from cataclasites to mylonites (frictional–viscous transition) at 280±30 °C. Within the mylonites, zones characterized by different dynamic recrystallization mechanisms were defined: Bulging recrystallization (BLG) was dominant between 280 and 400 °C, subgrain rotation recrystallization (SGR) in the 400–500 °C interval, and the transition to dominant grain boundary migration recrystallization (GBM) occurred at 500 °C. The microstructures associated with the three recrystallization mechanisms and the transitions between them can be correlated with experimentally derived dislocation creep regimes. Bulk texture X-ray goniometry and computer-automated analysis of preferred [c]-axis orientations of porphyroclasts and recrystallized grains are used to quantify textural differences that correspond to the observed microstructural changes. Within the BLG- and SGR zones, porphyroclasts show predominantly single [c]-axis maxima. At the transition from the SGR- to the GBM zone, the texture of recrystallized grains indicates a change from [c]-axis girdles, diagnostic of multiple slip systems, to a single maximum in Y. Within the GBM zone, above 630±30 °C, the textures also include submaxima, which are indicative of combined basal a- and prism [c] slip.  相似文献   

Petrology and geochemistry of orthoamphibolites from the Variscan metamorphic sequences of the South Tisia in Croatia – an overview with geodynamic implications     

Jakob Pamić  Dražen Balen  Darko Tibljaš 《International Journal of Earth Sciences》2002,91(5):787-798

In the southern Pannonian Basin, the Variscan Barrovian- and overprinted Abukuma-type progressive metamorphic sequences of the South Tisia in Slavonian Mts. (SM) and Mt. Moslava)ka Gora (MG) are interlayered with orthoamphibolites. These sequences represent part of a disrupted Variscan belt that extends southeastwards of the Bohemian Massif through the Carpathians to the Caucasus. Orthoamphibolites contain hornblende (Mg-hornblende, tschermakite, pargasite, and edenite), plagioclase An_48-98 (MG) and An_26-35 (SM), biotite, grossular (MG) and almandine (SM) enriched garnet, diopside (MG), with accessory ilmenite, titanite, and clinozoisite. Based on major and trace element analyses and CIPW norms, these orthoamphibolites, which originally were olivine tholeiites to slightly alkalic basalts, can be correlated with tholeiites of consuming plate margins. '¹⁸O of orthoamphibolites varies from 5.8 to 7.1‰, the measured ⁸⁷Sr/⁸⁶Sr ratio from 0.70435 to 0.70665, which indicates slight continental crust contamination, and the calculated ratio from 0.70262 to 0.70535, indicating an upper mantle origin of the original basaltic melts. For associated penecontemporaneous I-type granitoids, the calculated initial ⁸⁷Sr/⁸⁶Sr ratio also have upper mantle values ranging between 0.70293 and 0.70368. Geochemical data for orthoamphibolites and the associated penecontemporaneous I-type granites, and the occurrence of alpine-type ultramafic bodies within the Barrovian sequence, indicate that they have many features in common with orogenic associations related to recent subduction-related settings. Some characteristic element ratios suggest back-arc basin environments and the Ce/K vs. Ce diagram suggests a pargasite-lherzolite source. Its partial melting gave primitive basaltic melts of olivine tholeiite to slight alkalic affinities that produced at first differentiated mafic rocks by olivine fractionation (future orthoamphibolites) and, afterwards, a strongly differentiated suite of I-type granitoids by amphibole fractionation. Magma emplacement and subsequent AFC processes took place in subduction environments preceding the main Variscan deformational metamorphic event during which orthoamphibolites were generated. This interpretation is compatible with geodynamic modeling of this part of the Paleotethys.  相似文献   

基于DEM的分布式水文模型构建方法   总被引：52，自引：4，他引：52  

王中根  刘昌明  左其亭  刘青娥 《地理科学进展》2002,21(5):430-439

基于 DEM的分布式水文模型是现代水文学同高科技 (如计算机技术、 3S技术等 )相结合的产物 ,是研究变化环境下水文循环与水资源演化规律的理想工具 ,代表了水文模型的最新发展方向。从 DEM的特性出发 ,本文探讨并总结了分布式水文模型的特点、建模思路和模型基本结构框图。在流域离散化方面 ,重点介绍了分布式水文模型常用的三种单元划分方法 ;最后 ,针对分布式水文模型构建问题 ,从“输入模块”、“单元水文模型”、“河网汇流模型”三方面 ,阐述了分布式水文模型微结构构建方法。  相似文献   

矿物热重差分析的应用          下载免费PDF全文

范福南  范秀娥邢富 《岩矿测试》2003,22(2):154-157

根据矿物差热曲线特征温度，拟定使用热重差分析岩矿中全碳、结晶水、硫化物硫和二氧化碳等项目的灼烧温度范围，并进行热重差分析。所得的结果与其他方法结果一致。  相似文献   

WebGIS应用服务器数据调度优化策略研究   总被引：3，自引：5，他引：3  

王继周  付俊娥  李成名  林宗坚 《测绘科学》2003,28(3):30-31,42

应用服务器的数据调度是影响WebGIS系统性能的主要因素之一。本文在分析WebGIS体系结构的基础上,探讨了可以在服务器端数据调度中应用的若干优化技术,包括对象化包装、连接池、线程池、扩展SQL、多步传输协议和代理服务机制。经在实验中验证,采用这些技术的WebGIS系统在同等网络环境下,可以显著提高整体性能。  相似文献   

La vallée d'Ys : un paléoréseau hydrographique immergé en baie de Douarnenez (Finistère,France)     

Gwénaël Jouet  Claude Augris  Bernard Hallegouët  Pascal Le Roy  Joël Rolet 《Comptes Rendus Geoscience》2003,335(5):487-494

Interpretation of the recent high-resolution survey, CANADOU 2000, in the Bay of Douarnenez (Finistère, France) allowed us to restore the morphology of the substratum and the sedimentary filling of the bay. The Brioverian and Palaeozoic substratum reveals a well-defined network of incised valleys as results of successive emergence stages of the Bay during the Quaternary. Valleys join in a westward-widened mean valley, called Ys Valley. The present-day sedimentary fill of the bay of Douarnenez appears mainly controlled by the Holocene rise and the consecutive highstand. It comprises fluvial and estuarine deposits filling up incised valleys and marine sedimentation extending out of the incised valleys. To cite this article: G. Jouet et al., C. R. Geoscience 335 (2003).To cite this article: G. Jouet et al., C. R. Geoscience 335 (2003).  相似文献   

Croatia — a coastal and maritime country     

Nikola Stražičić 《GeoJournal》1996,38(4):445-453

Croatia, through its geographic position, is a Mediterranean/Adriatic and Central European/Danube state. As an Adriatic coastal state, it has a long maritime tradition, which is apparent in its well-developed shipping (2.4 million GT), the high-quality ship-building industry (among the top six in the world) and through its numerous sea ports, of which many were established in ancient times. The leading national port is Rijeka, which is at the same time an important transit port for Austria, Hungary, Slovakia and the Czech Republic.The exceptionally indented Croatian Adriatic coast with its attractive archipelagos and favorable climatic and oceanographic conditions in the coastal sea offers very advantageous conditions for comprehensive tourist utilization. This is particularly true of nautical tourism, which is complimented by a larger number of constructed and well-equipped yachting ports/marinas on the coast and islands.  相似文献   

Influence of the Load Wavelength on the Permeability of a Viscosity Interface in the Mantle     

Čížková  Hana  Čadek  Ondřej  van den berg  Arie P. 《Studia Geophysica et Geodaetica》1997,41(1):64-72

Assuming a radially stratified Newtonian mantle in a steady-state approximation, we demonstrate that the permeability of a viscosity interface at 660-km depth strongly depends on the wavelength of buoyancy forces driving the flow. The flow induced by long-wavelength loads penetrates through the boundary freely even if the viscosity increases by two orders. In contrast, the boundary is practically impermeable for short-wavelength loads located in the upper mantle. Thus, a stepwise increase of viscosity is a significant obstacle for small descending features in the upper mantle, but huge upper mantle downwellings, or upwellings formed in the-lower mantle can overcome it easily. This indicates that certain care is necessary in interpreting the seismic structure of the mantle by means of flow models. The global tomographic image includes only the first few degrees of the harmonic series and, consequently, its interpretation in terms of a present-day flow field results in a predominantly whole-mantle circulation even for extreme viscosity contrasts.  相似文献   

Remote sensing detection of atmospheric pollutants by differential absorption LIDAR 510M/SODAR PA2 mobile system     

J. Keder  M. Střižík  P. Berger  A. Černý  P. Engst  I. Němcová 《Meteorology and Atmospheric Physics》2004,85(1-3):155-164

Summary Air pollution problem in the Czech Republic is very complex due to large number of factors as turbulent dispersion and chemical reactions concurring in the status of the PBL. For this 3D distribution of pollutants is a key information that cannot be given by conventional monitoring stations. Combined use of DIAL lidar and sodar can give access to such information. Case studies of air pollutants transport are presented using 3D concentration fields of NO₂ and ozone measured by lidar and meteorological conditions monitored by Doppler Sodar.  相似文献