Two categories of earthquake precursors,physical and tectonic,and their roles in intermediate-term earthquake prediction   总被引：1，自引：0，他引：1  

Katsuhiko Ishibashi 《Pure and Applied Geophysics》1988,126(2-4):687-700

I suggest that earthquake precursors can be divided into two major categories, physical and tectonic. I define physical precursor to be a direct or indirect indication of initiation or progression of an irreversible rupture-generating physical process within the preparation zone of a forthcoming earthquake. Tectonic precursor is defined as a manifestation of tectonic movement which takes place outside the preparation zone of an impending earthquake as a link in a chain of particular local tectonism in each individual area preceding the earthquake.Most intermediate-term, short-term and immediate precursors of various disciplines within the source regions of main shocks are considered physical ones. Some precursory crustal deformations around the source regions are, however, possibly tectonic precursors, because they may be caused by episodic plate motions or resultant block movements in the neighboring regions of the fault segments that will break. A possible example of this phenomena is the anomalous crustal uplift in the Izu Peninsula, Japan, before the 1978 Izu-Oshima earthquake ofM _s 6.8. Some precursory changes in seismicity patterns in wide areas surrounding source regions also seem to be tectonic precursors, because they were probably caused by the particular tectonic setting of each region. A typical example is a so-called doughnut pattern before the 1923 Kanto, Japan, earthquake ofM _s 8.2.Although most studies on earthquake precursors so far seem to regard implicitly all precursory phenomena observed as physical ones, the two categories should be distinguished carefully when statistical analysis or physical modeling is carried out based on reported precursory phenomena. In active plate boundary zones, where a practical strategy for earthquake prediction may well be different from that in intraplate regions, tectonic precursors can be powerful additional tools for intermediate-term earthquake prediction.  相似文献   

Hayabusa‐returned sample curation in the Planetary Material Sample Curation Facility of JAXA     

Toru YADA  Akio FUJIMURA  Masanao ABE  Tomoki NAKAMURA  Takaaki NOGUCHI  Ryuji OKAZAKI  Keisuke NAGAO  Yukihiro ISHIBASHI  Kei SHIRAI  Michael E. ZOLENSKY  Scott SANDFORD  Tatsuaki OKADA  Masayuki UESUGI  Yuzuru KAROUJI  Maho OGAWA  Shogo YAKAME  Munetaka UENO  Toshifumi MUKAI  Makoto YOSHIKAWA  Junichiro KAWAGUCHI 《Meteoritics & planetary science》2014,49(2):135-153

Abstract– The Planetary Material Sample Curation Facility of JAXA (PMSCF/JAXA) was established in Sagamihara, Kanagawa, Japan, to curate planetary material samples returned from space in conditions of minimum terrestrial contaminants. The performances for the curation of Hayabusa‐returned samples had been checked with a series of comprehensive tests and rehearsals. After the Hayabusa spacecraft had accomplished a round‐trip flight to asteroid 25143 Itokawa and returned its reentry capsule to the Earth in June 2010, the reentry capsule was brought back to the PMSCF/JAXA and was put to a series of processes to extract recovered samples from Itokawa. The particles recovered from the sample catcher were analyzed by electron microscope, given their ID, grouped into four categories, and preserved in dimples on quartz slide glasses. Some fraction of them has been distributed for initial analyses at NASA, and will be distributed for international announcement of opportunity (AO), but a certain fraction of them will be preserved in vacuum for future analyses.  相似文献   

Investigation of cutting methods for small samples of Hayabusa and future sample return missions     

Masayuki Uesugi  Ryo Noguchi  Tooru Matsumoto  Junya Matsuno  Takashi Nagano  Akira Tsuchiyama  Shigenori Harada  Kaori Yokoyama  Yoshiaki Yodo  Noboru Takeda  Toru Yada  Shogo Yakame  Yuzuru Karouji  Yukihiro Ishibashi  Masanao Abe  Tatsuaki Okada  Akio Fujimura  Mitsuru Ebihara  Fumio Kitajima  Keisuke Nagao  Tomoki Nakamura  Hiroshi Naraoka  Takaaki Noguchi  Ryuji Okazaki  Hisayoshi Yurimoto 《Meteoritics & planetary science》2014,49(7):1186-1201

We report the investigation of cutting methods for Hayabusa samples. The purpose of our study is to explore the possibility of applying multiple analyses to a single particle effectively. We investigated the cutting performance of a blade dicing saw, laser, focused ion beam (FIB), and physical breaking by microindenter. Cutting performance was examined by estimating the aspect ratio of the cut slit, i.e., depth over width of the slit. We also investigated the possible contamination and sample damage by cutting. The result of the investigation shows that we can cut the samples from <50 μm to 500 μm using those methods with aspect ratios from 10 to 20, although they would introduce some contamination or damage to the samples. Our investigations also provide an important basis for the analysis of samples obtained by future sample return missions.  相似文献   

Crystallization temperature determination of Itokawa particles by plagioclase thermometry with X‐ray diffraction data obtained by a high‐resolution synchrotron Gandolfi camera     

Masahiko Tanaka  Tomoki Nakamura  Takaaki Noguchi  Aiko Nakato  Hatsumi Ishida  Toru Yada  Kei Shirai  Akio Fujimura  Yukihiro Ishibashi  Masanao Abe  Tatsuaki Okada  Munetaka Ueno  Toshifumi Mukai 《Meteoritics & planetary science》2014,49(2):237-244

The crystallization temperatures of Itokawa surface particles recovered by the space probe Hayabusa were estimated by a plagioclase geothermometer using sodic plagioclase triclinicity. The Δ131‐index required for the thermometer, which is the difference in X‐ray diffraction peak positions between the 131 and 11 reflections of plagioclase, was obtained by a high‐resolution synchrotron Gandolfi camera developed for the third generation synchrotron radiation beamline, BL15XU at SPring‐8. Crystallization temperatures were successfully determined from the Δ131‐indices for four particles. The observed plagioclase crystallization temperatures were in a range from 655 to 660 °C. The temperatures indicate crystallization temperatures of plagioclases in the process of prograde metamorphism before the peak metamorphic stage.  相似文献   

Geologic Core Holder with a CFR PEEK Body for the X-ray CT-Based Numerical Analysis of Fracture Flow Under Confining Pressure   总被引：1，自引：0，他引：1  

Noriaki Watanabe  Takuya Ishibashi  Noriyoshi Tsuchiya  Yutaka Ohsaki  Tetsuya Tamagawa  Yoshihiro Tsuchiya  Hiroshi Okabe  Hisao Ito 《Rock Mechanics and Rock Engineering》2013,46(2):413-418

  相似文献   

Statistics of Wind and Waves off Tsuyazaki, Fukuoka, in the Eastern Tsushima Strait     

Akira Masuda  Tadao Kusaba  Kenji Marubayashi  Michiyoshi Ishibashi 《Journal of Oceanography》1999,55(2):289-305

The variability of the sea surface wind and wind waves in the coastal area of the Eastern Tsushima Strait was investigated based on the hourly data from 1990 to 1997 obtained at a station 2 km off Tsuyazaki, Fukuoka. The annual mean wind speed was 4.84 m s⁻¹, with strong northwesterly monsoon in winter and weak southwesterly wind in summer. Significant wave heights and wave periods showed similar sinusoidal seasonal cycles around their annual means of 0.608 m and 4.77 s, respectively. The seasonal variability relative to the annual mean is maximum for wave heights, medium for wind speeds, and minimum for wave periods. Significant wave heights off Tsuyazaki turned out to be bounded by a criterion, which is proportional to the square of the significant wave period corresponding to a constant steepness, irrespective of the season or the wind speed. For terms shorter than a month, the significant wave height and the wave period were found to have the same spectral form as the inshore wind velocity: white for frequencies less than 0.2 day⁻¹ and proportional to the frequency to the −5/3 power for higher frequencies, where the latter corresponds to the inertial subrange of turbulence. The spectral levels of wave heights and wave periods in that inertial range were also correlated with those of the inshore wind velocity, though the scatter was large. This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献   

Characterization of sulfate mineral deposits in central Thailand          下载免费PDF全文

Junichiro Kuroda  Hidetoshi Hara  Katsumi Ueno  Thasinee Charoentitirat  Teruyuki Maruoka  Takashi Miyazaki  Akira Miyahigashi  Stefano Lugli 《Island Arc》2017,26(2)

In this paper we present petrographic and geochemical data of sulfate mineral deposits in northeast Nakhon Sawan, central Thailand, and provide new constraints on their age. The deposits are made up mainly of strongly deformed nodular and massive gypsum in the upper part, and less deformed layered anhydrite in the lower part. They are intruded by andesitic dikes that contain Middle Triassic zircons (ca 240 Ma). These dikes are probably part of the regional magmatic activity of the Sukhothai Arc during the Early to Middle Triassic. Sulfur (δ³⁴S) and strontium (⁸⁷Sr/⁸⁶Sr) isotopic compositions of the sulfates range from 15.86 ‰ to 16.26 ‰ and from 0.70810 to 0.70817, respectively. Comparisons with the Phanerozoic seawater isotopic evolution curve indicate that those values are best explained by precipitation of the sulfates from Carboniferous seawater, in particular seawater of late Mississippian age (ca 326 Ma), and this would be consistent with previous studies of calcareous fossils in the limestones that crop out around this site. Our interpretation is that evaporitic gypsum was originally precipitated from hypersaline seawater on a shallow lagoon or shelf on the Khao Khwang Platform during the Serpukhovian, and that this gypsum changed to anhydrite during early burial. The anhydrite was then cut by andesitic dikes during the Middle Triassic, and more recently the upper part of which was rehydrated during exhumation to form secondary gypsum near the surface.  相似文献   

Episyenite formation in the Toki granite,central Japan     

Shoji?NishimotoEmail author  Hidekazu?Yoshida  Yoshihiro?Asahara  Tadahiko?Tsuruta  Masayuki?Ishibashi  Nagayoshi?Katsuta 《Contributions to Mineralogy and Petrology》2014,167(1):960

Episyenite is a quartz-depleted vuggy rock resulting from hydrothermal alteration of granitic rocks. This is the first report of its existence in an island arc, which is identified in a deep drill core of the Toki Cretaceous granite distributed in central Japan. In order to understand the petrographical features of the episyenite, neutron porosity measurement, geochemical analysis, microscopic observation, and X-ray computed tomography scanning were carried out. The results show remarkably high porosity (35.4 %) due to interconnecting vugs and the removal of quartz, plagioclase, and biotite. The Rb–Sr isotopic results and the paragenetic sequence of secondary minerals in the vugs suggest that the hydrothermal alteration process can be divided into an episyenitization stage and a later hydrothermal stage. At the episyenitization stage (70.6 ± 3.1 Ma) ca. 6 million years after the emplacement of the unaltered granite (76.3 ± 1.5 Ma), dissolution of quartz, biotite, and plagioclase occurred and was followed by the precipitation of albite, vermicular chlorite, and platy calcite. The episyenitization is considered as a local alteration of the Toki granite in an isotopically closed system. At the later hydrothermal stage, illite and secondary quartz precipitated from circulating meteoric-derived water in the dissolution vugs. Superimposing alteration at the later hydrothermal stage is limited, which results in the preservation of the episyenite in an almost primitive condition.  相似文献   

Sylvite and halite on particles recovered from 25143 Itokawa: A preliminary report     

T. Noguchi  M. Kimura  T. Hashimoto  M. Konno  T. Nakamura  M. E. Zolensky  A. Tsuchiyama  T. Matsumoto  J. Matsuno  R. Okazaki  M. Uesugi  Y. Karouji  T. Yada  Y. Ishibashi  K. Shirai  M. Abe  T. Okada 《Meteoritics & planetary science》2014,49(7):1305-1314

We observed cross sectional ultra‐thin sections near the surface of 12 particles recovered from the S‐type asteroid Itokawa by the Hayabusa spacecraft in 2010, using spherical aberration–corrected STEM and conventional TEM. Although their mineralogy is almost identical to the equilibrated LL chondrites and therefore basically anhydrous, micrometer‐to‐submicrometer‐sized sylvite was identified on the surface of Itokawa particle RA‐QD02‐0034. Separately, micrometer‐sized halite was also identified on the surface of Itokawa particle RA‐QD02‐0129. Detailed inspection of the sample processing procedures at the JAXA's Planetary Materials Sample Curation Facility and textural observation of the sylvite and halite indicate that they were clearly present on two Itokawa particles before they were removed from Clean Chamber #2 at JAXA. However, there is no direct evidence for their extraterrestrial origin at present. If the sylvite and halite are extraterrestrial, their presence suggests that they may be more abundant on the surface of S‐type asteroids than previously thought.  相似文献   

Exploring sustainability of aquifers based on predictive modeling of sorption characteristics of arsenic enriched Holocene sediments in Bangladesh     

M. Tauhid-Ur-Rahman  Akira ManoKeiko Udo  Yoshinobu Ishibashi 《Applied Geochemistry》2011,26(4):636-647

The importance of accessing safe aquifers in areas with high As is being increasingly recognized. The present study aims to investigate the sorption and mobility of As at the sediment-groundwater interface to identify a likely safe aquifer in the Holocene deposit in southwestern Bangladesh. The upper, shallow aquifer at around 18 m depth, which is composed mainly of very fine, grey, reduced sand and contains 24.3 μg/g As, was found to produce highly enriched groundwater (190 μg/L As). In contrast, deeper sediments are composed of partly oxidized, brownish, medium sand with natural adsorbents like Fe- and Al-oxides; they contain 0.76 μg/g As and impart low As concentrations to the water (4 μg/L). These observations were supported by spectroscopic studies with SEM, TEM, XRD and XRF, and by adsorption, leaching, column tests and sequential extraction. A relatively high in-situ dissolution rate (R_r) of 1.42 × 10⁻¹⁶ mol/m²/s was derived for the shallower aquifer from the inverse mass-balance model. The high R_r may enhance As release processes in the upper sediment. The field-based reaction rate (K_r) was extrapolated to be roughly 1.23 × 10⁻¹³ s⁻¹ and 6.24 × 10⁻¹⁴ s⁻¹ for the shallower and deeper aquifer, respectively, from the laboratory-obtained adsorption/desorption data. This implies that As is more reactive in the shallower aquifer. The partition coefficient for the distribution of As at the sediment-water interface (K_d-As) was found to range from 5 to 235 L/kg based on in-situ, batch adsorption, and flow-through column techniques. Additionally, a parametric equation for K_d-As (R² = 0.67) was obtained from the groundwater pH and the logarithm of the leachable Fe and Al concentrations in sediment. A one-dimensional finite-difference numerical model incorporating K_d and K_r showed that the shallow, leached As can be immobilized and prevented from reaching the deeper aquifer (∼150 m) after 100 year by a natural filter of oxidizing sand and adsorbent minerals like Fe and Al oxides; in this scenario, 99% of the As in groundwater is reduced. The deeper aquifer appears to be an adequate source of sustainable, safe water.  相似文献