A new method for specular and diffuse pseudorange multipath error extraction using wavelet analysis     

Giovanni?Pugliano  Umberto?RobustelliEmail authorView author&#;s OrcID profile  Fabio?Rossi  Raffaele?Santamaria 《GPS Solutions》2016,20(3):499-508

Multipath remains one of the major challenges in Global Navigation Satellite System (GNSS) positioning because it is considered the dominant source of ranging errors, which can be classified into specular and diffuse types. We present a new method using wavelets to extract the pseudorange multipath in the time domain and breaking it down into the two components. The main idea is an analysis-reconstruction approach based on application of both continuous wavelet transform (CWT) and discrete wavelet transform (DWT). The proposed procedure involves the use of L1 code-minus-carrier (CMC) observable where higher-frequency terms are isolated as residuals. CMC residuals are analyzed by applying the CWT, and we propose the scalogram as a technique for discerning time–frequency variations of the multipath signal. Unlike Fourier transform, the potential of the CWT scalogram for examining the non-stationary and multifrequency nature of the multipath is confirmed as it simultaneously allows fine detection and time localization of the most representative frequencies of the signal. This interpretation of the CWT scalogram is relevant when choosing the levels of reconstruction with DWT, allowing accurate time domain extraction of both the specular and diffuse multipath. The performance and robustness of the method and its boundary applicability are assessed. The experiment was carried out using a receiver of Campania GNSS Network. The results are given in which specular multipath error is achieved using DWT level 7 approximation component and diffuse multipath error is achieved using DWT level 6 denoised detail component.  相似文献   

Optimization and Parametrical Investigation to Assess the Reconstitution of Different Types of Indian Sand Using Portable Travelling Pluviator     

V.?Srinivasan  Shubham?Srivastava  Priyanka?GhoshEmail author 《Geotechnical and Geological Engineering》2016,34(1):59-73

By using the air pluviation technique, it is aimed to achieve the desired relative density with uniform void ratio throughout the specimen in order to maintain the homogeneity and to avoid the spatial variability. Further, in order to achieve the maximum deposition intensity, a systematic optimization study has been carried out rigorously in a test tank to determine the diameter of the orifice to be employed for the sieve plates of different porosity and the number of sieve plates to be installed in the diffuser sieve sets. The study has been conducted with four different patterns of sieves with different porosity to achieve a wide range of relative densities for four different uniformly graded Indian sands. The dynamic penetrometer which is considered to be one of the cost effective instruments has been efficiently used to determine the soil resistance at various locations of the test tank for every given height of fall in order to check the uniformity of placement density throughout the sand bed. The study reveals that the sand beds of different relative densities could be achieved using different patterns of diffuser sieves at optimum sand flow rate without compromising the uniformity. The effect of height of fall as well as porosity of diffuser sieves on the relative density of different sands has been studied in detail. The deposition intensity and the relative density obtained from the present study are compared with the values available in the literature.  相似文献   

Assessment and Prediction of Liquefaction Potential Using Different Artificial Neural Network Models: A Case Study     

Abbas?Abbaszadeh ShahriEmail author 《Geotechnical and Geological Engineering》2016,34(3):807-815

Soil liquefaction as a transformation of granular material from solid to liquid state is a type of ground failure commonly associated with moderate to large earthquakes and refers to the loss of strength in saturated, cohesionless soils due to the build-up of pore water pressures and reduction of the effective stress during dynamic loading. In this paper, assessment and prediction of liquefaction potential of soils subjected to earthquake using two different artificial neural network models based on mechanical and geotechnical related parameters (model A) and earthquake related parameters (model B) have been proposed. In model A the depth, unit weight, SPT-N value, shear wave velocity, soil type and fine contents and in model B the depth, stress reduction factor, cyclic stress ratio, cyclic resistance ratio, pore pressure, total and effective vertical stress were considered as network inputs. Among the numerous tested models, the 6-4-4-2-1 structure correspond to model A and 7-5-4-6-1 for model B due to minimum network root mean square errors were selected as optimized network architecture models in this study. The performance of the network models were controlled approved and evaluated using several statistical criteria, regression analysis as well as detailed comparison with known accepted procedures. The results represented that the model A satisfied almost all the employed criteria and showed better performance than model B. The sensitivity analysis in this study showed that depth, shear wave velocity and SPT-N value for model A and cyclic resistance ratio, cyclic stress ratio and effective vertical stress for model B are the three most effective parameters on liquefaction potential analysis. Moreover, the calculated absolute error for model A represented better performance than model B. The reasonable agreement of network output in comparison with the results from previously accepted methods indicate satisfactory network performance for prediction of liquefaction potential analysis.  相似文献   

滨里海盆地东缘北特鲁瓦地区白云岩特征及其储层发育机制   总被引：1，自引：1，他引：0  

郭凯  程晓东  范乐元  严世帮  倪国辉  付海波 《沉积学报》2016,34(4):747-757

白云岩是滨里海盆地盐下石炭系碳酸盐岩的重要储层类型。在岩芯、薄片、物性与地球化学等资料分析的基础上,对研究区KT-Ⅰ油组的白云岩类型与储集性能进行了分析,并探讨了其储层发育的控制因素与模式。结果表明,白云岩类型与其储集物性具有较明显的相关性,以生屑铸模孔及溶蚀扩大孔为主的残余生屑白云岩物性与含油气性最好,以晶间（溶）孔为主的粉细晶白云岩和以生屑铸模孔及晶间孔为主的泥粉晶白云岩次之,而以晶间微孔为主的泥晶白云岩最差,难以成为有效储层。原生孔隙发育的相对高能生屑滩环境是该区优质白云岩储层发育的相带基础。晚石炭世准同生期大气淡水溶蚀作用与以渗透回流白云化（白云石有序度分布于0.32～0.67,δ13C介于-0.22‰～5.94‰,δ18O介于-1.09‰～2.45‰）为主的早期白云化作用为白云岩储层早期孔隙的发育与保存奠定了坚实的基础;早二叠世以来埋藏期各类裂缝的发育及酸性流体的溶蚀作用则对储层的晚期扩孔改造至关重要。  相似文献   

鞍山地区东鞍山花岗岩年代学、地球化学特征及成因研究   总被引：2，自引：1，他引：1  

朱凯  刘正宏  徐仲元  王兴安 《岩石学报》2016,32(2):590-604

鞍山地区位于华北地台东北部辽宁省,区内保留有3.8~2.5Ga连续的地质记录。对位于鞍山市南侧的东鞍山花岗岩进行了SHRIMP锆石U-Pb同位素分析、白云母Ar-Ar同位素分析及岩石地球化学分析。SHRIMP测年结果为3004±7Ma,代表岩石的形成年龄,Ar-Ar测年结果为2545±16Ma,代表岩石受到构造热事件扰动的时间。岩体地化特征为富硅(Si O2=72.95%~75.37%,平均值为74.18%)、富碱(K2O+Na2O=7.05%~8.45%)、富铝(Al2O3=12.95%~15.44%),低钙(Ca O=0.13%~0.66%)。在稀土元素配分图上,曲线呈明显的右倾趋势,且有较明显的负Eu异常,重稀土分馏不明显。在微量元素洋中脊玄武岩标准化蛛网图上可以看出,东鞍山花岗岩强烈亏损Nb、P、Sr、Ti,富集大离子亲石元素Rb、K、Nd和高场强元素Th、U。岩石地球化学特征表明东鞍山花岗岩岩浆来源为壳源,残留相可能由石榴石+辉石+角闪石+斜长石组成。将鞍山-本溪地区3个3.0Ga花岗岩(东鞍山花岗岩岩体、铁架山二长花岗岩岩体以及弓长岭片麻状花岗岩)的地球化学数据进行对比,发现三者的地球化学存在较大差异,为三个独立的岩体。三个岩体最初可能发育在一个陆块之上,然后在25.5亿年左右分离开来,最后在25亿年左右再次拼贴到一起。  相似文献   

哈拉湖地区天然气水合物地震探测技术试验     

徐明才  哈立洋  王小江  柴铭涛  刘建勋  王广科  张保卫  李培  王凯  高景华 《物探与化探》2016,(4):667-674

哈拉湖位于青藏高原,在该区开展的地质调查、音频大地电磁测深和地球化学调查结果表明,该区具有良好的天然气水合物找矿前景。为寻找天然气水合物,在该区开展了高精度反射地震试验。反射地震采用1 200道接收,道间距2 m,偏移距1 m,炮间距8 m,覆盖次数150次,排列中间激发的观测系统,每道采用6个60 Hz检波器单点组合接收;采样间隔0.5 ms,记录长度2 s,宽频带采集;激发震源为大型车载可控震源。采用该工作方法得到的地震剖面信噪比和分辨率较高,构造形态特征明显。根据试验区地形地貌和地震剖面上反映的永冻土层厚度、断裂构造和高速层分布,结合其他资料,确定了验证孔位。  相似文献   

Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China   总被引：1，自引：1，他引：0  

ZHANG Yongshuang  YAO Xin  YU Kai  DU Guoliang  and GUO Changbao 《《地质学报》英文版》2016,90(2):525-536

The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts: the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –(3±1) mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.  相似文献   

北京平原区地质剖面的初步建立——太古宙结晶基底和元古宙地层          下载免费PDF全文

吕金波  郑桂森  李良景  王海波  刘凯  王纯君 《中国地质》2016,(3):879-889

北京平原目前尚未建立系统的地质剖面。1867年庞培莱将北京西山分为3大系,1871年李希霍芬提出震旦系、划分12层。1922年葛利普将震旦系限定在前寒武系,1923年田奇镌将南口剖面划分为7个岩组,1934年高振西将震旦系3分(南口群、蓟县群、青白口群)。1976年乔秀夫3分青白口群(下马岭组、龙山组和景儿峪组),1980年汪长庆等将十三陵剖面分为4系12组,1991版《北京市区域地质志》将十三陵剖面分为3系12组。本文初步建立平原区地层表,详细描述太古宙结晶基底和元古宙地层剖面,在京南大兴区的榆垡(兴热-1井)和安定(兴热-2井)发现太古宙片麻岩,在京热-70井、京热-59井、京热-71井和京热-75井编录蓟县纪地层,利用亦庄小学钻孔厘定待建系下马岭组、青白口纪龙山组和景儿峪组。  相似文献   

四川会理天宝山矿床深部新发现铜矿与铅锌矿的成因关系探讨   总被引：2，自引：1，他引：1  

孙海瑞  周家喜  黄智龙  樊海峰  叶霖  罗开  高建国 《岩石学报》2016,32(11):3407-3417

天宝山矿床是川滇黔接壤铅锌矿集区内的代表性铅锌矿床之一,赋存于上震旦统灯影组白云岩中。近年来,该矿床深部发现了以铜为主的矿化,甚至形成铜矿体。目前,对铜矿成因及其与铅锌矿的关系尚不清晰。本文报道新发现铜矿的矿物学和同位素地球化学资料,以期揭示铜矿的成矿物质来源,结合铅锌矿的相关研究,探讨铜矿形成机制及其与铅锌矿的成因关系。镜下观察和扫描电镜分析显示,铜矿石中主要金属矿物为黄铜矿和银黝铜矿,其次为方铅矿和毒砂,含少量闪锌矿和黄铁矿;铅锌矿石中闪锌矿是主要金属矿物,方铅矿和黄铁矿次之,含少量黄铜矿和深红银矿。铜矿石中闪锌矿主要呈半自形-他形粒状,与黄铜矿共生或被其包裹,方铅矿主要呈细脉状充填在黄铜矿、银黝铜矿和毒砂的裂隙中或呈他形粒状分布在这些矿物中;铅锌矿石中黄铜矿主要呈浸染状分布于闪锌矿之中。两类矿石金属矿物的组构特征,显示铜矿物与铅锌矿物具有密切的共生、穿插和包裹关系,应属同期成矿。同位素地球化学数据显示,铜矿石中黄铜矿的δ34SCDT值为3.9‰~4.2‰(均值为4.1‰,n=3),铅锌矿石闪锌矿的δ34SCDT值为3.3‰~3.9‰(均值为3.5‰,n=3),十分相近,暗示它们具有相似的S源,应均属赋矿地层海相蒸发岩中硫酸盐热化学还原作用的产物。铜矿石中黄铜矿的~(206)Pb/~(204)Pb=18.441~18.476(均值为18.461,n=3),~(207)Pb/~(204)Pb=15.731~15.751(均值为15.741,n=3),~(208)Pb/~(204)Pb=38.809~38.873(均值为38.849,n=3),μ=9.72~9.76;铅锌矿石中方铅矿的~(206)Pb/~(204)Pb=18.442~18.480(均值为18.455,n=3),~(207)Pb/~(204)Pb=15.746~15.763(均值为15.752,n=3),~(208)Pb/~(204)Pb=38.793~38.892(均值为38.840,n=3),μ=9.75~9.78。两者具有相近的Pb同位素组成且其壳源特征明显,表明它们的成矿金属来源相似,均来自上地壳,与赋矿沉积岩有关。综上,矿物学和同位素地球化学证据表明,天宝山矿床深部新发现铜矿与铅锌矿具有明显的同期共生关系和相似的成矿物质来源,是同一成矿热液体系不同阶段演化的产物。天宝山铜铅锌矿床与MVT矿床的成矿特征不同,暗示其成矿作用(环境)特殊,可能与矿床所处的地质背景有关,其成因认识对川滇黔接壤区同类型矿床深部找铜矿具有重要的指导意义。  相似文献   

胶东-朝鲜半岛中生代金成矿作用   总被引：8，自引：2，他引：6  

范宏瑞  冯凯  李兴辉  胡芳芳  杨奎锋 《岩石学报》2016,32(10):3225-3238

华北克拉通东部与朝鲜半岛相接,是中朝克拉通的重要组成部分。在华北克拉通东部的胶东半岛和朝鲜半岛内皆产出有不同规模的金矿床,并具有显著的地域特色。胶东半岛已发现金矿床(点)近200处,其中三山岛、焦家、新城、玲珑等为世界级金矿,它们为石英脉型和受构造控制的蚀变岩型,成矿时间主要集中在~120Ma,说明金成矿作用是在相当短的时间内,在同一成矿背景下和同一构造-岩浆-流体成矿系统下完成的。成矿流体主要来自幔源岩浆以及幔源岩浆与地壳相互作用产生的地质流体,就位环境与地壳/岩石圈在早白垩世强烈伸展构造变形有关,为克拉通破坏型金矿;与我国辽东相邻的朝鲜半岛北部平安北道等地金矿储量较大,成矿类型与特征辽东五龙金矿类似,为石英脉型矿化,也可能为早白垩世与华北克拉通岩石圈减薄、破坏相关的金矿床;朝鲜半岛南部的韩国金(银)矿床分成侏罗纪中温热液型和白垩纪浅成低温热液型两类,其中侏罗纪热液脉状金矿成矿特征虽与胶东金矿类似,但成矿时代(峰期~160Ma)有显著差异。而白垩纪浅成低温热液型金-银矿化主要发生在100~70Ma,与太平洋板块俯冲作用相关,为典型的环太平洋斑岩-次火山活动有关的浅成低温贱金属成矿系列。胶东和朝鲜半岛金矿床类型、特征及成矿时间的异同,与区域中生代地质演化及地球动力学背景密切相关。  相似文献