Volcanoes as possible indicators of tectonic stress orientation — Aleutians and Alaska     

Kazuaki Nakamura  Klaus H. Jacob  John N. Davies 《Pure and Applied Geophysics》1977,115(1-2):87-112

A new method for obtaining from volcanic surface features the orientations of the principal tectonic stresses is applied to Aleutian and Alaskan volcanoes. The underlying concept for this method is that flank eruptions for polygenetic volcanoes can be regarded as the result of a large-scale natural magmafracturing experiment. The method essentially relies on the recognition of the preferred orientation of radial and parallel dike swarms, primarily using the distribution of monogenetic craters including flank volcanoes. Since dikes tend to propagate in a direction normal to the minimum principal stress (T-axis), the method primarily yields the direction of the maximum horizontal compression (MHC) of regional origin. The direction of the MHC may correspond to either the maximum (P-axis) or intermediate (B-axis) principal stress.The direction of MHC obtained at 20 volcanoes in the Aleutian arc coincides well with the direction of convergence between the Pacific and North American plates. This result provides evidence that in the island arc the inferred direction of MHC is parallel to the maximum principal tectonic stress. In the back-arc region, general E-W trends of MHC are obtained from seven volcanic fields on islands on the Bering Sea shelf and the mainland coast of Alaska. These volcanic fields consist mostly of clusters of monogenetic volcanoes of alkali basalt. In the back-arc region, the trends of MHC may correspond to an E-W intermediate, a vertical maximum, and a N-S minimum principal stress.Implications for the tectonics of island arcs and back-arc regions are: (1) volcanic belts of some island arcs, including the Aleutian arc, are under compressional deviatoric stress in the direction of plate convergence. It is improbable that such arcs would split along the volcanic axis to form actively spreading marginal basins. (2) This compressional stress at the arc, probably generated by underthrusting, appears to be transmitted across the entire arc structure, but is apparently replaced within several hundred kilometers by a stress system characterized by horizontal extension (tensional deviatoric stress) in the back-arc region. (3) The volcanoes associated with these two stress systems differ in type (polygenetic vs. monogenetic) and in the chemistry of their magmas (andesitic vs. basaltic). These differences and the regional differences in orientation of the principal tectonic stresses suggest that the back-arc stress system has its own source at considerable depth beneath the crust.Lamont-Doherty Geological Observatory Contribution No. 2503.  相似文献   

Paleomagnetic stratigraphy and biostratigraphy of the Plio-Pleistocene in the Kinki district, Japan     

Kazuaki Maenaka  Takuo Yokoyama  Shiro Ishida 《Quaternary Research》1977,7(3):341-362

The magnetostratigraphic subdivision of the Plio-Pleistocene series in the Kinki district around Osaka in southwest Japan, based on NRM measurements of volcanic ash beds, is correlated with biostratigraphic and paleoclimatic marker beds as well as past sea level oscillations. At least 10 high sea level stands occurred in the study area between about 1.5 and 0.27 million years ago, all associated with relative warming. A significant change in the composition of flora, from Metasequoia to Fagus dominated assemblages, was observed around the Jaramillo event.  相似文献   

Lattice dynamics of α-quartz including the effect of the width of the atomic electron distribution     

Kazuaki Iishi  Mitiko Miura  Yuji Shiro  Hiromu Murata 《Physics and Chemistry of Minerals》1983,9(2):61-66

On the basis of the polarizable-ion model (PIM) the effect of the width of the atomic electron distribution on the lattice dynamics of α-quartz was taken into account using the Birman method. The frequencies of optical mode, elastic constants and piezoelectric constants were reproduced using the parameters of this model (an effective charge z, a width parameter w, an electronic polarizability α, and force constants). The width parameter of oxygen atom was found to be about 0.59 Å, and the effective charge of the silicon atom 1.42 electron charges.  相似文献   

Examining the aerosol indirect effect over China using an SO₂ emission inventory     

Kazuaki Kawamoto  Tadahiro Hayasaka  Teruyuki Nakajima  David Streets  Jung-Hun Woo 《Atmospheric Research》2004,72(1-4):353

The relationship between SO₂ emissions and the effective particle radius of low-level water clouds (r_e) over China was investigated to determine anthropogenic effects on clouds. Sulfur dioxide emission values were obtained from a statistical inventory, and r_e origins were retrieved by satellite remote sensing on a 0.5° grid. Comparisons between annual mean SO₂ emissions and r_e showed generally decreasing r_e values, explained by the Twomey effect. The existence of the Twomey effect is supported by comparisons with simulated aerosol optical depths. Results further suggest that clouds over land show sensitivity to the Twomey effect as well as clouds over the ocean.  相似文献   

Oblique and near collision subduction, Sagami and Suruga Troughs —preliminary results of the French-Japanese 1984 Kaiko cruise, Leg 2     

Kazuaki Nakamura  Vincent Renard  Jacques Angelier  Jacques Azema  Jacques Bourgois  Christine Deplus  Kantaro Fujioka  Yozo Hamano  Philippe Huchon  Hajimu Kinoshita  Pierre Labaume  Yujiro Ogawa  Tetsuzo Seno  Akira Takeuchi  Manabu Tanahashi  Akinori Uchiyama  Jean-Louis Vigneresse 《Earth and Planetary Science Letters》1987,83(1-4)

Leg 2 of the French-Japanese 1984 Kaiko cruise has surveyed the Suruga and the Sagami Troughs, which lie on both sides of the northwestward moving and colliding Izu-Bonin Ridge, the northernmost part of the Philippine Sea plate. The transition from the Nankai Trough to the Suruga Trough is characterized by northward decrease in width of the accretionary prism, in good agreement with the increasing obliquity between the through axis and the direction of the convergence, as the strike of the convergent boundary changes from ENE-NNE to south-north. South of the area, the southern margin of the Zenisu Ridge shows contractional deformations. This supports the interpretation made by the team of Leg 1 who studied the western extension of the area we studied, that it is an intra-oceanic thrusting of the ridge over the Shikoku Basin. In the Sagami Trough, where the relative motion is highly oblique to the plate boundary, active subduction is mostly confined in the east-west trending portions of the trough located south of the Boso Peninsula and along the lower Boso Canyon, near the TTT triple junction. In between, the present motion is mainly right-lateral along the northwest trending Boso escarpment. However, an inactive but recent (Pliocene to lower Pleistocene) accretionary prism exists south of the Boso escarpment, which suggests that the relative motion was more northerly than at present before about 1 Ma ago.  相似文献   

GPS静态连续变位监测系统的应用——以四川雅安滑坡为例     

增成友宏  角谷一明  侯圣山  李昂  周平根 《中国地质灾害与防治学报》2007,18(2):81-88

GPS精密测量在火山监测等地壳变动、山体滑坡监测中起到了非常有效的作用,已被广泛使用。但是,以前多在土木测量中使用的器材在实际监测中有很多限制,包括传感器、电源、通信等,如不做成系统很难体现出利用价值。笔者成功地将在恶劣气候条件下也能实施监测的系统实用化,并利用连续监测,通过统计处理达到高精度的实时变位监测。目前,日本有超过380个此类系统在通信、电源、环境条件均非常恶劣的现场运行着。我们应用此系统对四川雅安多营滑坡进行连续位移监测,并通过因特网实现位移监测数据的实时传输。经过近一年的监测证明,此系统监测精度高、运行稳定可靠[1~4]。  相似文献   

Volcanoes as possible indicators of tectonic stress orientation — principle and proposal     

Kazuaki Nakamura 《Journal of Volcanology and Geothermal Research》1977,2(1):1-16

A method is proposed for determining the orientation of average tectonic stress, using surface features indicating radial dike patterns of volcanoes. The approximate pattern of radial dikes is revealed by the distribution of sites of flank eruptions on the slope of polygenetic volcanoes. This conclusion is deduced from the understanding that flank eruptions are caused by the magma that laterally offshoots from the main polygenetic pipe conduit and that conduits of flank volcanoes are most probably fissure-shaped because most of them are monogenetic volcanoes. Radial dikes are more likely to develop in a direction normal to the minimum horizontal compression of the regional stress. Thus, the distribution of flank craters will be elongate in the direction of the maximum horizontal compression of the regional stress.The regional stress can sometimes be ascribed solely to the effect of the gravity rather than tectonic stress. When a number of independent polygenetic volcanoes dotted with more than several flank volcanoes, are distributed in a belt or over a broad area, it is possible to distinguish the tectonic stress from the direct gravitational effect by the regional uniformity in orientation of the zones of flank volcanoes. When the maximum compression of tectonic stress is horizontal, the trends of the zones of flank eruptions on polygenetic volcanoes are more or less linear and parallel, and at a high angle to the trend of the main volcanic belt.  相似文献   

Distinctive erosional and depositional structures formed at a canyon mouth: A lower Pleistocene deep‐water succession in the Kazusa forearc basin on the Boso Peninsula,Japan     

Makoto Ito  Kazuaki Ishikawa  Naohisa Nishida 《Sedimentology》2014,61(7):2042-2062

The canyon mouth is an important component of submarine‐fan systems and is thought to play a significant role in the transformation of turbidity currents. However, the depositional and erosional structures that characterize canyon mouths have received less attention than other components of submarine‐fan systems. This study investigates the facies organization and geometry of turbidites that are interpreted to have developed at a canyon mouth in the early Pleistocene Kazusa forearc basin on the Boso Peninsula, Japan. The canyon‐mouth deposits have the following distinctive features: (i) The turbidite succession is thinner than both the canyon‐fill and submarine‐fan successions and is represented by amalgamation of sandstones and pebbly sandstones as a result of bypassing of turbidity currents. (ii) Sandstone beds and bedsets show an overall lenticular geometry and are commonly overlain by mud drapes, which are massive and contain fewer bioturbation structures than do the hemipelagic muddy deposits. (iii) The mud drapes have a microstructure characterized by aggregates of clay particles, which show features similar to those of fluid‐mud deposits, and are interpreted to represent deposition from fluid mud developed from turbidity current clouds. (iv) Large‐scale erosional surfaces are infilled with thick‐bedded to very thick‐bedded turbidites, which show lithofacies quite similar to those of the surrounding deposits, and are considered to be equivalent to scours. (v) Concave‐up erosional surfaces, some of which face in the upslope direction, are overlain by backset bedding, which is associated with many mud clasts. (vi) Tractional structures, some of which are equivalent to coarse‐grained sediment waves, were also developed, and were overlain locally by mud drapes, in association with mud drape‐filled scours, cut and fill structures and backset bedding. The combination of these outcrop‐scale erosional and depositional structures, together with the microstructure of the mud drapes, can be used to identify canyon‐mouth deposits in ancient deep‐water successions.  相似文献   

Accretionary Orogens of the Japanese Islands and Their Comparison with the Central Asian Orogenic Belt: Sr-Nd-Hf Isotopic Evidence     

JAHN Bor-ming  USUKI Masako  ISHIHARA Shunso  OKAMOTO Kazuaki  USUKI Tadashi 《《地质学报》英文版》2013,87(Z1):302-304

  相似文献   

Local structure of (Ca, Sr)2 (Mg, Co, Zn) Si2O7 melilite solid-solution with modulated structure     

Takuo Tamura  Akira Yoshiasa  Kazuaki Iishi  Setsuo Takeno  Hironobu Maeda  Shuichi Emura  Kichiro Koto 《Physics and Chemistry of Minerals》1996,23(2):81-88

The local structure around Co, Zn and Sr atoms in incommensurately modulated, melilite-type X₂T¹ T ₂ ² O₇ (X=Ca and Sr, T¹=Mg, Co and Zn, T²=Si) solid-solutions has been investigated by EXAFS analyses. The modulated structure was confirmed in Ca_2-xSr_xCoSi₂O₇ solid-solutions with X=0.0 to 0.6 and for both Ca₂Mg_1-YCo_YSi₂O₇ and Ca₂Mg_1-YZn_YSi₂O₇ solid-solutions over the whole compositional range at room temperature. The actual bond-distances determined by the EXAFS method for the T¹ site (Co-, Zn-O) in the modulated structure are longer than the mean bond-distances obtained from the X-ray diffraction method. This is attributable to the libration of the T¹ tetrahedra. In the Ca_1-XSr_XCoSi₂O₇ solid-solution both the Sr-O and Co-O distances by the EXAFS method for the X-site increase from Ca end-member to Sr end-member. These increases are respectively 0.8% and 0.6%. This means the local expansions of the tetrahedral sheets and of the XO polyhedra are well matched. In the modulated Ca₂Co_1-YMg_YSi₂O₇ and Ca₂Zn_1-YMg_YSi₂O₇ solid-solutions, the actual Co-O and Zn-O distances for the T¹-sites are nearly constant in the whole compositional range. The compositional variations of the local structure around the cations in the solid-solution are different for the X and T¹ sites. It is concluded that the local geometric restriction for the size of substituted cation in X site is larger than that in T¹ site. The dimension of the tetrahedral sheet puts restriction on the size of the cations situated at the interlayer X sites. In other words, the different behavior of the local geometric restriction between the X and T¹ sites is an important feature of the melilite structure and is also related to the modulated structure.  相似文献