基于GIS的城市工程建设多测合一管理平台设计与实现     

肖亮  欧阳松南  叶锐铿 《北京测绘》2021,35(6):717-721

近年来,为了加快疏解企业办事堵点、痛点,深化"放管服"改革,优化营商环境建设,最大限度惠企便民,国内许多城市开始深化工程建设项目审批制度改革,全面开展工程建设项目多测合并、联合测绘和成果共享工作.结合东莞市工程建设项目审批的实际情况,探讨多部门协同的多测合一(联合测绘)管理流程,构建多测合一全过程管理数据库,开发东莞市...  相似文献   

Identifying the scope of the Lhasa Metropolitan Area based on a spatial field energy model     

Wang  Zhenbo  Li  Jiaxin  Liang  Longwu 《地理学报(英文版)》2021,31(2):245-264

The cultivation and development of modern metropolitan areas with the aim of establishing new regional centers with competitive edge is a key objective for the new-type urbanization directions in China. The construction of the Lhasa Metropolitan Area is of great significance for the promotion of the South Asia Channel, the ‘Belt and Road' initiative, the Bangladesh-China-India-Myanmar Economic Corridor, the Himalaya Economic Cooperation Zone, and for rapid development and long-term stability of the Qinghai-Tibet Plateau. This paper examines the scope of the Lhasa Metropolitan Area including Chengguanqu(Chengguan District), Doilungdeqen, Dagze, Lhunzhub, Damxung, Nyemo, Quxu, Maizhokunggar, Samzhubze Qu(Samzhubze District), Gyangze, Rinbung, Bainang, Nedong, Gonggar, and Zhanang using a spatial field energy model that combines nodality and accessibility indices and considers multiple indicators including traffic flow between cities. By combining factors such as the natural background, population agglomeration, the social economy, infrastructure construction, and the urban spatial structure of the Lhasa Metropolitan Area, it is proposed to build a bow-and-arrow-shaped urban system with ‘one core, two centers, one axis, and two wings' along the valleys and the transportation trunk lines of the area. The study advocates the construction of a pure land industrial system comprising a green cultural and tourism-oriented plateau.  相似文献   

基于CPTU解释黏性土不排水抗剪强度方法研究     

陈亮  徐春喆  郭鹏  赵学亮  张友虎 《海洋工程》2024,(1):147-157

黏性土的不排水抗剪强度Su是海上风电工程设计中重要的力学参数之一,孔压静力触探测试（简称CPTU）无法直接测得黏土强度,但其所提供的锥尖阻力、侧摩阻力以及孔隙水压力与土体的不排水抗剪强度存在映射关系,国内外基于CPTU已经演化出多种解释土体不排水抗剪强度计算公式。基于滨海某海上风电项目,开展了原位CPTU试验、三轴不固结不排水（UU）、三轴固结不排水（CU）、固结快剪（CQ）以及船上微型十字板剪切（MVST）试验,对已有计算公式的适用性进行了校验,分析发现需根据区域场地情况对其中经验系数进行相应的调整以提高计算精度。研究基于CU试验结果,结合工程实例对原有公式中经验参数进行优化修正,最后通过误差分析,验证了修正预测模型的准确性与合理性,利用改进后的修正预测模型可使江苏地区海域黏性土不排水抗剪强度的计算得到更准确的结果。  相似文献   

浙江省沿海陆域与舟山海域地闪回击特征分析     

陈军  孙轶  李京校  张骁  林伟  于梦颖 《气象科技》2022,50(1):139-146

采用2016-2020年浙江省闪电定位资料,利用Access和MATLAB对浙江省陆域、舟山海域地闪回击特征进行分析.结果显示:浙江省陆域年平均地闪回击密度为1.97次·km-2·a-1,正地闪回击密度为0.10次·km-2·a-1,正地闪回击占总地闪回击的5.1％,正地闪回击平均电流强度为42.49 kA,负地闪为3...  相似文献   

中南地区航空器空中颠簸指数适用分析     

陈春元  罗义  王刚  谢文锋 《气象科技》2022,50(3):412-419

利用ERA Interim再分析资料和2015—2019年中南地区航空器空中报告,对比分析7个指数在中南地区空中颠簸的适用效果,结果表明：①不同指数有无颠簸之间的值域重合率,Brown指数最低,其次是Ellrod1和Ellrod2,能够从指数值判断颠簸的强弱及存在与否,空报率较低;MOS CAT和L P指数值域重合率过高,容易造成较高的空报。②Ellrod1、Ellrod2和Brown计算的颠簸区与空中报告的位置对应最好,Dutton和HTG表现不稳定,MOS CAT和L P指数计算范围偏大,适用性较差。不同指数计算侧重点不同,当热力因素占主导时,HTG指数计算效果较好。  相似文献   

An analytical solution for describing the transient temperature distribution in an aquifer thermal energy storage system     

Kuang‐Yi Li  Shaw‐Yang Yang  Hund‐Der Yeh 《水文研究》2010,24(25):3676-3688

A mathematical model is developed for predicting the temperature distribution in an aquifer thermal energy storage (ATES) system, which consists of a confined aquifer bounded from above and below by the rocks of different geological properties. The main transfer processes of heat include the conduction and advection in the aquifer and the conduction in the rocks. The semi‐analytical solution in dimensionless form for the model is developed by Laplace transforms and its corresponding time‐domain solution is evaluated by the modified Crump method. Field geothermal property data are used to simulate the temperature distribution in an ATES system. The results show that the heat transfer in the aquifer is fast and has a vast effect on the vicinity of the wellbore. However, the aquifer temperature decreases with increasing radial and vertical distances. The temperature in the aquifer may be overestimated when ignoring the effect of thermal conductivity. The temperature distribution in an ATES system depends on the vertical thermal conduction in the rocks and the horizontal advection and thermal conduction in the aquifer. The present solution is useful in designing and simulating the heat injection facility in the ATES systems. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Analysis of the contributions of topographic,soil, and vegetation features on the spatial distributions of surface soil moisture in a steep natural forested headwater catchment          下载免费PDF全文

Wei‐Li Liang  Sheng‐Lun Li  Feng‐Xu Hung 《水文研究》2017,31(22):3796-3809

Surface soil moisture has been extensively studied for various land uses and landforms. Although many studies have reported potential factors that control surface soil moisture over space or time, the findings have not always been consistent, indicating a need for identification of the main factors. This study focused on the static controls of topographic, soil, and vegetation features on surface soil moisture in a steep natural forested headwater catchment consisting of three hillslope units of a gully area, side slope, and valley‐head slope. Using a simple correlation analysis to investigate the effects of the static factors on surface soil moisture at depths of 0–20 cm at 470 points in 13 surveys, we addressed the characteristics of surface soil moisture and its main controlling factors. The results indicated that the mean of surface soil moisture was in the decreasing order of gully area > valley‐head slope > side slope. The relationship between the mean and standard deviation of surface soil moisture showed a convex‐upward shape in the headwater catchment, a negative curvilinear shape in the gully area, and positive curvilinear shapes at the side and valley‐head slopes. At the headwater catchment and valley‐head slope, positive contributions of soil porosity and negative contributions of slope gradient and saturated hydraulic conductivity were the main controlling factors of surface soil moisture under wetter conditions, whereas positive contributions of topographic wetness index and negative contributions of vegetation density were the main controlling factors of surface soil moisture under drier conditions. At the side slope underlain by fractured bedrocks, only saturated hydraulic conductivity and vegetation density were observed to be the controlling factors. Surface soil moisture in the gully area was mainly affected by runoff rather than were static features. Thus, using hillslope units is effective for approximately estimating the hydrological behaviours of surface moisture on a larger scale, whereas dependency between the main static factors and moisture conditions is helpful for estimating the spatial distributions of surface moisture on a smaller scale.  相似文献   

Parallelization of the distinct lattice spring model     

Gao‐Feng Zhao  Jiannong Fang  Liang Sun  Jian Zhao 《国际地质力学数值与分析法杂志》2013,37(1):51-74

The distinct lattice spring model (DLSM) is a newly developed numerical tool for modeling rock dynamics problems, i.e. dynamic failure and wave propagation. In this paper, parallelization of DLSM is presented. With the development of parallel computing technologies in both hardware and software, parallelization of a code is becoming easier than before. There are many available choices now. In this paper, Open Multi‐Processing (OpenMP) with multicore personal computer (PC) and message passing interface (MPI) with cluster are selected as the environments to parallelize DLSM. Performances of these parallel DLSM codes are tested on different computers. It is found that the parallel DLSM code with OpenMP can reach a maximum speed‐up of 4.68× on a quad‐core PC. The parallel DLSM code with MPI can achieve a speed‐up of 40.886× when 256 CPUs are used on a cluster. At the end of this paper, a high‐resolution model with four million particles, which is too big to handle by the serial code, is simulated by using the parallel DLSM code on a cluster. It is concluded that the parallelization of DLSM is successful. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Direct observation of complex Tóthian groundwater flow systems in the laboratory     

Xing Liang  Yu Liu  Menggui Jin  Xingchen Lu  Renquan Zhang 《水文研究》2010,24(24):3568-3573

Based on the theory of gravity‐driven groundwater flow systems, we have developed a complex Flow System Sand‐Box Model (FSM). It enables the visual observations of the development and characteristics and temporal evolution of complex Tóthian flow systems in the laboratory. The configuration of the regional, intermediate and local flow systems can be controlled and observed; hydraulic head, flow direction and travel time can be measured; and the scale and shape of the sub‐flow systems as well as the path lines and flow lines can be observed directly. The experiments demonstrate the Tóthian flow systems in a small basin with multiple sources and sinks. Greater local topographic (water table) undulation will lead to larger local flow systems. Greater regional and less local topographic undulation will enhance the development of intermediate and regional flow systems. In homogeneous media, increasing fluid‐potential differences between source and sink increase the spatial scale of the generated flow systems. The FSM is a useful teaching aid and experimental device to study and develop an intuitive insight into gravity‐driven groundwater flow systems. It helps to visualize and understand the hydraulic properties and controlling factors of Tóthian flow systems and may be used to study problems related to the chemical and temperature characteristics of the flow systems as well. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Rate and historical change of direct recharge from precipitation constrained by unsaturated zone profiles of chloride and oxygen‐18 in dry river bed of North China Plain     

Ruiqiang Yuan  Xianfang Song  Dongmei Han  Yinghua Zhang  Liang Zhang  Bing Zhang  Xiting Long  Yilei Yu 《水文研究》2012,26(9):1291-1301

Quantifying of direct recharge derived from precipitation is crucial for assessing sustainability of well‐irrigated agriculture. In the North China Plain, the land use is dominated by groundwater‐irrigated farmland where the direct recharge derived from precipitation and irrigation. To characterize the mean rate and historical variance of direct recharge derived from precipitation, unsaturated zone profiles of chloride and δ¹⁸O in the dry river bed of the Beiyishui River were employed. The results show that archival time scale of the profile covers the duration from 1980 to 2002 (corresponding to depths from 5 to 2 m) which is indicated by matching the δ¹⁸O peaks in the isotope profile with the aridity indexes gained by instrumental records of annual precipitation and annual potential evaporation. Using the chloride mass balance method, the mean rate of the direct recharge corresponding to the archival time scale is estimated to be 3·8 ± 0·8 mm year^?1, which accounts for about 0·7% of the long‐term average annual precipitation. Further, the direct recharge rates vary from 2·1 to 6·8 mm year^?1 since 1980. Despite the subhumid climate, the estimate of recharge rates is in line with other findings in semiarid regions. The low rate of direct recharge is considered as a result of the relative dry climate in recent decades. In dry river bed, unsaturated zone profiles of chloride and δ¹⁸O combined with instrumental records could offer valuable information about the direct recharge derived from precipitation during droughts. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献