Competitive heavy metals adsorption on natural bed sediments of Jajrood River,Iran   总被引：3，自引：1，他引：2  

Mohsen Saeedi  Majid Hosseinzadeh  Maryam Rajabzadeh 《Environmental Earth Sciences》2011,62(3):519-527

The presence of heavy metal concentrations was examined in natural sediments from four sites along the Jajrood river in northeast of Tehran, the capital of Iran. Besides determination of elemental concentrations (Pb, Cu, Zn, Cd, Ni and Cr), X-ray fluorescence and X-ray diffraction tests were carried out to determine other chemical components in these adsorbents. Also the ability of sediments to adsorb these heavy metal ions from aqueous solutions was investigated. Results show that the extent of adsorption increases with increase in adsorbent concentration. The amount of adsorbed Pb, Cu and Zn in sediments was much greater than that of the other metals, and Cr was adsorbed much less than others. The adsorbabilities of sediments to heavy metals increased in the order of Pb > Cu > Zn > Cd > Ni > Cr. Based on the adsorption data, equilibrium isotherms were determined at selected areas to characterize the adsorption process. The adsorption data followed Freundlich and Langmuir isotherms in most cases. Correlation and cluster analysis was performed on heavy metals adsorption and sediment components at each site to evaluate main adsorbing compounds in sediments for each metal. Results demonstrated that heavy metals sorption is mostly related to load of organic matter in the Jajrood river sediments.  相似文献   

Sorption of lead on Iranian bentonite and zeolite: kinetics and isotherms     

Mohsen Hamidpour  Mahmoud Kalbasi  Majid Afyuni  Hossein Shariatmadari  Gerhard Furrer 《Environmental Earth Sciences》2011,62(3):559-568

This study deals with the use of the natural, low-cost sorbents bentonite and zeolite for the removal of lead from aqueous solutions. The mineral material is from large deposits of bentonite and zeolite that have been discovered recently in Iran. Experimental and modeling data from our kinetic and equilibrium investigations reveal that (1) the pseudo-second-order kinetic model gave the best fit, and (2) the Koble–Corrigan sorption model describes the interaction between Pb(II) and the two mineral materials better than the Freundlich and Langmuir models. However, the sorption of Pb(II) ions by zeolite and bentonite is complex and probably involves several mechanisms. The experimental data show that natural zeolite and bentonite used in this study exhibited a reasonable sorption capacity for Pb(II), and thus may be useful for the immobilization of Pb(II) from polluted sites.  相似文献   

Seismic microzonation for Penang using geospatial contour mapping     

Chee Ghuan Tan  Taksiah A. Majid  Kamar Shah Ariffin  Norazura Mohamad Bunnori 《Natural Hazards》2014,73(2):657-670

Shear wave velocity (V _s) and the fundamental site period of the subsurface condition are the primary parameters that affect seismic soil amplification in particular sites. Within the topmost layer of the soil, which measures 30 m, the average shear wave velocity V _s30 is commonly used to build codes for site classification for the design of earthquake-resistant structures and to conduct microzonation studies. In this study, the development of a microzonation map for V _s30 distribution, National Earthquake Hazard Reduction Program V _s30 site classification, and a fundamental site period for Penang are presented. The multichannel analysis of surface wave (MASW) test was conducted for more than 50 sites with available borehole data to develop the microzonation maps. The ten selected V _s profiles measured by MASW show a good correlation with the data obtained using empirical correlations in a previous study. The highest V _s values were identified at the northeastern and southeastern parts of Penang Island, corresponding to the shallow bedrock and the outcrop zone. Conversely, the lowest V _s values were found in the northwestern and southwestern parts of the Penang mainland owing to the thick layer of soft clay and silt deposits. The site period map shows the variation in site periods, with the highest value of 1.03 s at the western part of the Penang mainland and the lowest value of 0.02 s at the eastern part of the Penang Island. The microzonation maps developed in this study are vital to studies on seismic hazard and earthquake mitigation programs in Malaysia.  相似文献   

Sorkhe‐Dizaj Iron Oxide–Apatite Ore Deposit in the Cenozoic Alborz‐Azarbaijan Magmatic Belt,NW Iran     

Ghasem Nabatian  Majid Ghaderi  Farahnaz Daliran  Nematollah Rashidnejad‐Omran 《Resource Geology》2013,63(1):42-56

The Sorkhe‐Dizaj iron oxide–apatite deposit in the Cenozoic Alborz‐Azarbaijan magmatic belt, NW Iran, is hosted mainly by a Late Eocene to Oligocene quartz‐monzonitic body, and subordinately in the Eocene volcanic and volcanoclastic sequences. The Sorkhe‐Dizaj intrusive body is an I‐type granitoid of the calc‐alkaline series. Mineralization is associated with actinolization, K‐feldspar, sericitic, propylitic, and tourmaline alteration types. The orebodies are massive, banded, stockwork, and breccia in shape and occur mainly along the fault zones within the quartz‐monzonitic intrusion, volcanic, and volcanoclastic rocks. Ore minerals dominantly comprise magnetite, apatite, and monazite, as well as minor amounts of chalcopyrite, bornite, and pyrite. Four major paragenetic stages are discriminated in the mineralization including early, oxide, sulfide, and late stage. The Sorkhe‐Dizaj deposit is similar in the aspects of host rock lithology, alteration, and mineralogy to the Kiruna‐type deposits associated with minor Cu sulfide minerals. Spatial and temporal association of the mineralization with the Late Eocene–Early Oligocene quartz‐monzonite intrusive body suggests that the ore fluid was probably related to magmatic activity.  相似文献   

Effects of windy sand and LECA mulches on decreasing evaporation from soil surface     

Majid Fekri  Leila Sadegh Kasmaei 《Arabian Journal of Geosciences》2013,6(1):163-168

Inadequate moisture supply is one of the important factors limiting crop yields in the world. Increasing the efficiency of moisture available has an important role on the crop-producing capacity of the soil. This paper presents the results of the laboratory experiments conducted to assess the influence of two mulches of windy sand and light expanded clay aggregate (LECA) with three thicknesses (1, 3, and 4 cm) on soil surface in soil columns. Loamy soil was taken from the experimental site in Bayaz of Rafsanjan (a city in Kerman province in Iran). These experiments were done as completely randomized design with two treatments of mulches (windy sand and LECA) and tree replicates. The results show that the columns of treated soil with mulches had lower evaporation as compared to the control. The rate of evaporation from the soil surface of columns was decreased with increasing the thickness from 1 to 4 cm of each of the two mulches. The LECA mulch was more effective in reducing evaporation from the soil surface than the windy sand mulch with the same thicknesses. The most effective among the thicknesses for mulches was 3 cm.  相似文献   

A comparative study between sequential Gaussian simulation and kriging method grade modeling in open-pit mining     

Masoud Monjezi  Majid Rajabalizadeh Kashani  Mohammad Ataei 《Arabian Journal of Geosciences》2013,6(1):123-128

Grade estimation is very important in designing open pits. In the process of grade estimation, underestimation can result in loss of economic ore, whereas overestimation would unnecessarily increase stripping ratio. Normally, kriging method, which suffers from underestimation and/or overestimation due to smoothing effect, is used for grade estimation. To overcome drawbacks of the kriging method, more efficient techniques such as conditional simulation can be applied. In this paper, utilizing sequential Gaussian conditional simulation, grade models were constructed for Sungun copper deposit situated in the North West of Iran. According to the obtained results, it was observed that conditional simulation can effectively cope with the weakness of kriging method. Also, it was observed that as compared to the kriging method, grade distribution, resulted from the conditional simulation, is almost identical to that of the real exploration data. Accordingly, using conditional simulation, the amount of mineable ore was significantly increased, and also, average net present value as the mines’ most important economic indicator was improved by 40%.  相似文献   

Application of weights-of-evidence and certainty factor models and their comparison in landslide susceptibility mapping at Haraz watershed, Iran   总被引：10，自引：1，他引：9  

Hamid Reza Pourghasemi  Biswajeet Pradhan  Candan Gokceoglu  Majid Mohammadi  Hamid Reza Moradi 《Arabian Journal of Geosciences》2013,6(7):2351-2365

The main goal of this study was to investigate the application of the weights-of-evidence and certainty factor approaches for producing landslide susceptibility maps of a landslide-prone area (Haraz) in Iran. For this purpose, the input layers of the landslide conditioning factors were prepared in the first stage. The landslide conditioning factors considered for the study area were slope gradient, slope aspect, altitude, lithology, land use, distance from streams, distance from roads, distance from faults, topographic wetness index, stream power index, stream transport index and plan curvature. For validation of the produced landslide susceptibility maps, the results of the analyses were compared with the field-verified landslide locations. Additionally, the receiver operating characteristic curves for all the landslide susceptibility models were constructed and the areas under the curves were calculated. The landslide locations were used to validate results of the landslide susceptibility maps. The verification results showed that the weights-of-evidence model (79.87%) performed better than certainty factor (72.02%) model with a standard error of 0.0663 and 0.0756, respectively. According to the results of the area under curve evaluation, the map produced by weights-of-evidence exhibits satisfactory properties.  相似文献   

Dry and water-stable aggregates in different cultivation systems of arid region soils     

Majid Mahmoodabadi  Bahareh Ahmadbeigi 《Arabian Journal of Geosciences》2013,6(8):2997-3002

Soil aggregate stability has been known as one of the most important soil properties which is influenced by cultivation system. This study investigates the effect of different cultivation systems on aggregate stability indices in two statuses of dry (DSA?>?0.25 mm) and wet (WSA?>?0.25 mm). The study was done in six cultivation systems consisting wheat, barley, maize, alfalfa, fallow, and plowed farms. The results showed that aggregate stability indices affected significantly by the type of cultivation system. In contrast, no meaningful effect of soil depth (0–10 and 10–20 cm) on selected soil properties was observed. In addition, soil primary particles as well as organic carbon differed significantly between the cultivation systems. Wheat and alfalfa farms consisted of larger aggregates, while water-stable aggregate for wheat found to be in a greater degree. Moreover, wheat and barley showed the highest contents of organic carbon. The results of WSA?>?0.25 mm indicated that the correlation coefficients for sand, silt, clay, and organic carbon contents were ?0.67, 0.74, 0.12, and 0.70, respectively. Compared to the DSA?>?0.25 mm, the effect of soil organic carbon on the WSA?>?0.25 mm was arisen while the influence of clay fraction reduced.  相似文献   

MATLAB programs for the synthetic models     

Mahmoud Mehramuz  Hossein Zomorrodian  Khadijeh Ahmadi  Majid Mahood 《Arabian Journal of Geosciences》2013,6(10):3853-3864

The separation of residual gravity anomaly from regional gravity has considerably been studied for many years in gravity explorations. In addition, it is considered as a critical step in gravity data inversion. Some techniques have been developed for regional–residual anomaly separation both in space and frequency domains. One of these techniques for computing the regional anomaly is nonlinear filtering. In this paper, some techniques such as low-pass filtering, Butterworth, upward continuation, and nonlinear filtering are used to on synthetic gravity data in present of random noise and noise free for the purpose of residual–regional anomaly separation. The obtained results of techniques are compared with each other. The results have shown that separation methods are so efficient where synthetic models are located in shallow depth. Moreover, it is found that in comparison with other separation techniques, nonlinear filtering is more efficient in residual–regional anomaly separation and upward continuation technique is more efficient than Butterworth filter and low-pass filter. In addition, all of the obtained results have shown that Butterworth and low-pass filters are the same.  相似文献   

Modeling habitat suitability of range plant species using random forest method in arid mountainous rangelands     

Hossein Piri Sahragard  Majid Ajorlo  Peyman Karami 《山地科学学报》2018,15(10):2159-2171

Mountainous rangelands play a pivotal role in providing forage resources for livestock, particularly in summer, and maintaining ecological balance. This study aimed to identify environmental variables affecting range plant species distribution, ecological analysis of the relationship between these variables and the distribution of plants, and to model and map the plant habitats suitability by the Random Forest Method(RFM) in rangelands of the Taftan Mountain, Sistan and Baluchestan Province, southeastern Iran. In order to determine the environmental variables and estimate the potential distribution of plant species, the presence points of plants were recorded by using systematic random sampling method(90 points of presence) and soils were sampled in 5 habitats by random method in 0–30 and 30–60 cm depths. The layers of environmental variables were prepared using the Kriging interpolation method and Geographic Information System facilities. The distribution of the plant habitats was finally modelled and mapped by the RFM. Continuous maps of the habitat suitability were converted to binary maps using Youden Index(?) in order to evaluate the accuracy of the RFM in estimation of the distribution of species potentialhabitat. Based on the values of the area under curve(AUC) statistics, accuracy of predictive models of all habitats was in good level. Investigating the agreement between the predicted map, generated by each model, and actual maps, generated from fieldmeasured data, of the plant habitats, was at a high level for all habitats, except for Amygdalus scoparia habitat. This study concluded that the RFM is a robust model to analyze the relationships between the distribution of plant species and environmental variables as well as to prepare potential distribution maps of plant habitats that are of higher priority for conservation on the local scale in arid mountainous rangelands.  相似文献